[U-Boot] Please pull u-boot-ti/master
Tom Rini
tom.rini at gmail.com
Fri Feb 10 23:56:57 CET 2012
Hello,
The following changes since commit ca849aa4b86b282f837c58a0b129460ebfad2239:
David Müller (ELSOFT AG) (1):
ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Aneesh V (1):
OMAP4460: Reduce MPU clock speed from 920 to 700
Christian Riesch (5):
arm, davinci: Add lowlevel_init for SoCs other than DM644X
arm, arm926ejs: Do cpu critical inits only for boards that require it
arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH
arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined
arm, davinci: Add support for the Calimain board from OMICRON electronics
Govindraj.R (6):
usb: ulpi: Extend the existing ulpi framework.
usb: ulpi: Add omap-ulpi-view port support
ehci-omap: Clean up added ehci-omap.c
OMAP3+: Clock: Adding ehci clock enabling
OMAP4: clock-common: Move the usb dppl configuration to new func
OMAP4: ehci-omap: enable ehci-omap for panda boards
Hadli, Manjunath (2):
davinci: remove macro CONFIG_DISPLAY_CPUINFO
davinci: add support for printing clock frequency
Ilya Yanok (2):
ehci-omap: driver for EHCI host on OMAP3
mcx: support for HTKW mcx board
Peter Barada (2):
omap3logic: Add missing GPMC pinmux for LAN92xx access
ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
Peter Meerwald (3):
beagle: fix typos
omap3: fix comment typos
doc: fix typos
Schuyler Patton (1):
AM3517: Changed default clock rate for AM3517
Stefano Babic (2):
OMAP3: TAM3517: update ehci interface
ARM: omap3: Added Teejet mt_ventoux
Sughosh Ganu (2):
arm, arm926ejs: Flush the data cache before disabling it
Changes to move hawkboard to the new spl infrastructure
MAINTAINERS | 10 +
README | 6 +
arch/arm/cpu/arm926ejs/davinci/cpu.c | 76 ++--
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 24 +-
arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S | 4 +
arch/arm/cpu/arm926ejs/davinci/spl.c | 4 +-
arch/arm/cpu/arm926ejs/start.S | 28 +-
arch/arm/cpu/armv7/omap-common/clocks-common.c | 54 ++-
arch/arm/cpu/armv7/omap3/board.c | 8 +-
arch/arm/cpu/armv7/omap3/clock.c | 20 +
arch/arm/cpu/armv7/omap4/clocks.c | 27 +-
arch/arm/include/asm/arch-davinci/da850_lowlevel.h | 9 +
arch/arm/include/asm/arch-omap3/clocks_omap3.h | 2 +-
.../asm/arch-omap3/{ehci_omap3.h => ehci.h} | 45 +--
arch/arm/include/asm/arch-omap3/mem.h | 57 ++--
arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap4/ehci.h | 49 +++
arch/arm/include/asm/ehci-omap.h | 142 +++++++
arch/arm/include/asm/u-boot.h | 3 +
arch/arm/lib/board.c | 10 +-
board/davinci/da8xxevm/da850evm.c | 4 +-
board/davinci/da8xxevm/hawkboard.c | 23 +
board/davinci/da8xxevm/hawkboard_nand_spl.c | 115 ------
.../{u-boot-spl.lds => u-boot-spl-da850evm.lds} | 0
.../davinci/da8xxevm/u-boot-spl-hawk.lds | 22 +-
board/efikamx/efikamx-usb.c | 24 +-
board/enbw/enbw_cmc/enbw_cmc.c | 13 +-
board/htkw/mcx/Makefile | 38 ++
board/htkw/mcx/mcx.c | 112 +++++
board/htkw/mcx/mcx.h | 408 +++++++++++++++++++
board/logicpd/omap3som/omap3logic.c | 15 +
board/omicron/calimain/Makefile | 45 ++
board/omicron/calimain/calimain.c | 188 +++++++++
board/technexion/twister/twister.c | 22 +
board/teejet/mt_ventoux/Makefile | 38 ++
board/teejet/mt_ventoux/mt_ventoux.c | 233 +++++++++++
board/teejet/mt_ventoux/mt_ventoux.h | 429 ++++++++++++++++++++
board/ti/beagle/beagle.c | 109 +-----
board/ti/beagle/beagle.h | 4 +-
board/ti/panda/panda.c | 38 ++
board/ti/panda/panda_mux_data.h | 16 +-
boards.cfg | 4 +-
common/cmd_bdinfo.c | 9 +
doc/README.SPL | 4 +-
doc/README.hawkboard | 43 +-
doc/README.omap-ulpi-viewport | 27 ++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-omap.c | 255 ++++++++++++
drivers/usb/ulpi/Makefile | 1 +
drivers/usb/ulpi/omap-ulpi-viewport.c | 105 +++++
drivers/usb/ulpi/ulpi-viewport.c | 32 +-
drivers/usb/ulpi/ulpi.c | 54 ++--
include/common.h | 1 +
include/configs/calimain.h | 363 +++++++++++++++++
include/configs/cam_enc_4xx.h | 11 +-
include/configs/da830evm.h | 4 +
include/configs/da850evm.h | 11 +-
include/configs/davinci_dm355evm.h | 5 +-
include/configs/davinci_dm355leopard.h | 5 +-
include/configs/davinci_dm365evm.h | 4 +
include/configs/davinci_dm6467Tevm.h | 5 +-
include/configs/davinci_dm6467evm.h | 5 +-
include/configs/davinci_dvevm.h | 6 +-
include/configs/davinci_schmoogie.h | 5 +-
include/configs/davinci_sffsdr.h | 5 +-
include/configs/davinci_sonata.h | 5 +-
include/configs/ea20.h | 4 +
include/configs/enbw_cmc.h | 11 +-
include/configs/hawkboard.h | 28 ++-
include/configs/mcx.h | 378 +++++++++++++++++
include/configs/mt_ventoux.h | 58 +++
include/configs/omap3_beagle.h | 8 +
include/configs/omap4_panda.h | 26 ++-
include/configs/tam3517-common.h | 6 +-
include/usb/ulpi.h | 36 ++-
nand_spl/board/davinci/da8xxevm/Makefile | 155 -------
76 files changed, 3496 insertions(+), 659 deletions(-)
rename arch/arm/include/asm/arch-omap3/{ehci_omap3.h => ehci.h} (51%)
create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
create mode 100644 arch/arm/include/asm/ehci-omap.h
delete mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c
rename board/davinci/da8xxevm/{u-boot-spl.lds => u-boot-spl-da850evm.lds} (100%)
rename nand_spl/board/davinci/da8xxevm/u-boot.lds => board/davinci/da8xxevm/u-boot-spl-hawk.lds (86%)
create mode 100644 board/htkw/mcx/Makefile
create mode 100644 board/htkw/mcx/mcx.c
create mode 100644 board/htkw/mcx/mcx.h
create mode 100644 board/omicron/calimain/Makefile
create mode 100644 board/omicron/calimain/calimain.c
create mode 100644 board/teejet/mt_ventoux/Makefile
create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
create mode 100644 doc/README.omap-ulpi-viewport
create mode 100644 drivers/usb/host/ehci-omap.c
create mode 100644 drivers/usb/ulpi/omap-ulpi-viewport.c
create mode 100644 include/configs/calimain.h
create mode 100644 include/configs/mcx.h
create mode 100644 include/configs/mt_ventoux.h
delete mode 100644 nand_spl/board/davinci/da8xxevm/Makefile
I've tested the USB changes on Beagleboard xM and Pandaboard ES.
--
Tom
More information about the U-Boot
mailing list