[U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support

[Jason Hui]

On Wed, Feb 22, 2012 at 6:24 PM, Stefano Babic <sbabic at denx.de> wrote:
> Signed-off-by: Stefano Babic <sbabic at denx.de>
> CC: Jason Liu <jason.hui at linaro.org>
> ---
>  board/freescale/mx53loco/mx53loco.c |    3 +++
>  include/configs/mx53loco.h          |   11 +++++++++++
>  2 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
> index d736141..7ea9f6e 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -27,6 +27,7 @@
>  #include <asm/arch/mx5x_pins.h>
>  #include <asm/arch/sys_proto.h>
>  #include <asm/arch/crm_regs.h>
> +#include <asm/arch/clock.h>
>  #include <asm/arch/iomux.h>
>  #include <asm/arch/clock.h>
>  #include <asm/errno.h>
> @@ -302,6 +303,8 @@ int board_init(void)
>  {
>        gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
>
> +       mxc_set_sata_internal_clock();
> +
>        return 0;
>  }
>
> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
> index 34a4edd..af59307 100644
> --- a/include/configs/mx53loco.h
> +++ b/include/configs/mx53loco.h
> @@ -56,6 +56,7 @@
>  #define CONFIG_CMD_MMC
>  #define CONFIG_GENERIC_MMC
>  #define CONFIG_CMD_FAT
> +#define CONFIG_CMD_EXT2
>  #define CONFIG_DOS_PARTITION
>
>  /* Eth Configs */
> @@ -193,4 +194,14 @@
>
>  #define CONFIG_OF_LIBFDT
>
> +#define CONFIG_CMD_SATA
> +#ifdef CONFIG_CMD_SATA
> +       #define CONFIG_DWC_AHSATA
> +       #define CONFIG_SYS_SATA_MAX_DEVICE      1
> +       #define CONFIG_DWC_AHSATA_PORT_ID       0
> +       #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
> +       #define CONFIG_LBA48
> +       #define CONFIG_LIBATA
> +#endif
> +
>  #endif                         /* __CONFIG_H */
> --
> 1.7.5.4
>

Acked-by: Jason Liu <jason.hui at linaro.org>