[U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support

Stefano Babic sbabic at denx.de
Wed Feb 22 11:24:41 CET 2012


Signed-off-by: Stefano Babic <sbabic at denx.de>
CC: Jason Liu <jason.hui at linaro.org>
---
 board/freescale/mx53loco/mx53loco.c |    3 +++
 include/configs/mx53loco.h          |   11 +++++++++++
 2 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index d736141..7ea9f6e 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -27,6 +27,7 @@
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/clock.h>
 #include <asm/errno.h>
@@ -302,6 +303,8 @@ int board_init(void)
 {
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
+	mxc_set_sata_internal_clock();
+
 	return 0;
 }
 
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 34a4edd..af59307 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -56,6 +56,7 @@
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
 
 /* Eth Configs */
@@ -193,4 +194,14 @@
 
 #define CONFIG_OF_LIBFDT
 
+#define CONFIG_CMD_SATA
+#ifdef CONFIG_CMD_SATA
+	#define CONFIG_DWC_AHSATA
+	#define CONFIG_SYS_SATA_MAX_DEVICE      1
+	#define CONFIG_DWC_AHSATA_PORT_ID       0
+	#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
+	#define CONFIG_LBA48
+	#define CONFIG_LIBATA
+#endif
+
 #endif				/* __CONFIG_H */
-- 
1.7.5.4



More information about the U-Boot mailing list