[U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Marek Vasut
marek.vasut at gmail.com
Sun Feb 12 12:06:28 CET 2012
> Hi Marek,
>
> On 02/11/2012 08:12 AM, Marek Vasut wrote:
> >> Currently, only USB Host 1 is supported.
> >
> > Hi,
> >
> > this resembles mx28 USBH ... or am I wrong? Can't these be coalesced
> > together?
>
> Good point. The MX6Q seems to be some kind of clone of the MX28, indeed.
> Not only for USB but also for FEC and likely other interfaces as well.
Yep, USB, NAND, FEC ... maybe something else.
>
> > btw Fabio, do we support mx6q USB host in mainline Linux ?
> >
> >> Cc: Remy Bohmer <linux at bohmer.net>
> >> Signed-off-by: Wolfgang Grandegger <wg at denx.de>
> >> ---
> >>
> >> arch/arm/cpu/armv7/mx6/clock.c | 13 ++
> >> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> >> arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +
> >> drivers/usb/host/Makefile | 1 +
> >> drivers/usb/host/ehci-mx6.c | 205
> >>
> >> ++++++++++++++++++++++++++++++ 5 files changed, 223 insertions(+), 0
> >> deletions(-)
> >>
> >> create mode 100644 drivers/usb/host/ehci-mx6.c
> >>
> >> diff --git a/arch/arm/cpu/armv7/mx6/clock.c
> >> b/arch/arm/cpu/armv7/mx6/clock.c index fa3a124..ef98563 100644
> >> --- a/arch/arm/cpu/armv7/mx6/clock.c
> >> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> >> @@ -36,6 +36,19 @@ enum pll_clocks {
> >>
> >> struct imx_ccm_reg *imx_ccm = (struct imx_ccm_reg *)CCM_BASE_ADDR;
> >>
> >> +void enable_usboh3_clk(unsigned char enable)
> >> +{
> >> + u32 reg;
> >> +
> >> + reg = __raw_readl(&imx_ccm->CCGR6);
> >> + if (enable)
> >> + reg |= MXC_CCM_CCGR_CG_MASK << MXC_CCM_CCGR0_CG0_OFFSET;
> >> + else
> >> + reg &= ~(MXC_CCM_CCGR_CG_MASK << MXC_CCM_CCGR0_CG0_OFFSET);
> >> + __raw_writel(reg, &imx_ccm->CCGR6);
> >> +
> >> +}
> >> +
> >>
> >> static u32 decode_pll(enum pll_clocks pll, u32 infreq)
> >> {
> >>
> >> u32 div;
> >>
> >> diff --git a/arch/arm/include/asm/arch-mx6/clock.h
> >> b/arch/arm/include/asm/arch-mx6/clock.h index 636458f..613809b 100644
> >> --- a/arch/arm/include/asm/arch-mx6/clock.h
> >> +++ b/arch/arm/include/asm/arch-mx6/clock.h
> >> @@ -46,5 +46,6 @@ enum mxc_clock {
> >>
> >> u32 imx_get_uartclk(void);
> >> u32 imx_get_fecclk(void);
> >> unsigned int mxc_get_clock(enum mxc_clock clk);
> >>
> >> +void enable_usboh3_clk(unsigned char enable);
> >>
> >> #endif /* __ASM_ARCH_CLOCK_H */
> >>
> >> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h
> >> b/arch/arm/include/asm/arch-mx6/imx-regs.h index 3b5fd25..2bfe891 100644
> >> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> >> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> >> @@ -111,6 +111,9 @@
> >>
> >> #define KPP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x38000)
> >> #define WDOG1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x3C000)
> >> #define WDOG2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x40000)
> >>
> >> +#define ANATOP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x48000)
> >> +#define USB_PHY0_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x49000)
> >> +#define USB_PHY1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x4a000)
> >>
> >> #define CCM_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x44000)
> >> #define ANATOP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x48000)
> >> #define SNVS_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x4C000)
> >>
> >> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> >> index 77e217f..1b62cc2 100644
> >> --- a/drivers/usb/host/Makefile
> >> +++ b/drivers/usb/host/Makefile
> >> @@ -43,6 +43,7 @@ endif
> >>
> >> COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
> >> COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
> >> COBJS-$(CONFIG_USB_EHCI_MX5) += ehci-mx5.o
> >>
> >> +COBJS-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
> >>
> >> COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
> >> COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
> >> COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
> >>
> >> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
> >> new file mode 100644
> >> index 0000000..b7bf49d
> >> --- /dev/null
> >> +++ b/drivers/usb/host/ehci-mx6.c
> >> @@ -0,0 +1,205 @@
> >> +/*
> >> + * Copyright (c) 2009 Daniel Mack <daniel at caiaq.de>
> >> + * Copyright (C) 2010 Freescale Semiconductor, Inc.
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> it + * under the terms of the GNU General Public License as published
> >> by the + * Free Software Foundation; either version 2 of the License,
> >> or (at your + * option) any later version.
> >> + *
> >> + * This program is distributed in the hope that it will be useful, but
> >> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> >> MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> >> General Public License + * for more details.
> >> + */
> >> +
> >> +#include <common.h>
> >> +#include <usb.h>
> >> +#include <errno.h>
> >> +#include <linux/compiler.h>
> >> +#include <usb/ehci-fsl.h>
> >> +#include <asm/io.h>
> >> +#include <asm/arch/imx-regs.h>
> >> +#include <asm/arch/clock.h>
> >> +#include <asm/arch/mx6x_pins.h>
> >> +#include <asm/arch/iomux-v3.h>
> >> +
> >> +#include "ehci.h"
> >> +#include "ehci-core.h"
> >> +
> >> +#define USB_OTGREGS_OFFSET 0x000
> >> +#define USB_H1REGS_OFFSET 0x200
> >> +#define USB_H2REGS_OFFSET 0x400
> >> +#define USB_H3REGS_OFFSET 0x600
> >> +#define USB_OTHERREGS_OFFSET 0x800
> >> +
> >> +#define USB_H1_CTRL_OFFSET 0x04
> >> +
> >> +#define USBPHY_CTRL 0x00000030
> >> +#define USBPHY_CTRL_SET 0x00000034
> >> +#define USBPHY_CTRL_CLR 0x00000038
> >> +#define USBPHY_CTRL_TOG 0x0000003c
> >> +
> >> +#define USBPHY_PWD 0x00000000
> >> +#define USBPHY_CTRL_SFTRST 0x80000000
> >> +#define USBPHY_CTRL_CLKGATE 0x40000000
> >> +#define USBPHY_CTRL_ENUTMILEVEL3 0x00008000
> >> +#define USBPHY_CTRL_ENUTMILEVEL2 0x00004000
>
> These macros are already defined in
> "arch/arm/include/asm/arch-mx28/regs-usbphy.h".
>
> >> +#define ANADIG_USB2_CHRG_DETECT 0x00000210
> >> +#define ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000
> >> +#define ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000
> >> +
> >> +#define ANADIG_USB2_PLL_480_CTRL 0x00000020
> >> +#define ANADIG_USB2_PLL_480_CTRL_SET 0x00000024
> >> +#define ANADIG_USB2_PLL_480_CTRL_CLR 0x00000028
> >> +#define ANADIG_USB2_PLL_480_CTRL_BYPASS 0x00010000
> >> +#define ANADIG_USB2_PLL_480_CTRL_ENABLE 0x00002000
> >> +#define ANADIG_USB2_PLL_480_CTRL_POWER 0x00001000
> >> +#define ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS 0x00000040
>
> And these are in "arch/arm/include/asm/arch-mx6/ccm_regs.h", which I
> just realized after a closer look.
>
> >> +
> >> +#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent
*/
> >> +#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent
> >> Detection */ +
> >> +/* USBCMD */
> >> +#define UH1_USBCMD_OFFSET 0x140
> >> +#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
> >> +#define UCMD_RESET (1 << 1) /* controller reset */
> >> +
> >> +static void usbh1_internal_phy_clock_gate(int on)
> >> +{
> >> + void __iomem *phy_reg = (void __iomem *)USB_PHY1_BASE_ADDR;
> >> +
> >> + phy_reg += on ? USBPHY_CTRL_CLR : USBPHY_CTRL_SET;
> >> + __raw_writel(USBPHY_CTRL_CLKGATE, phy_reg);
> >> +}
> >> +
> >> +static void usbh1_power_config(void)
> >> +{
> >> + void __iomem *anatop_base = (void __iomem *)ANATOP_BASE_ADDR;
> >> +
> >> + /*
> >> + * Some phy and power's special controls for host1
> >> + * 1. The external charger detector needs to be disabled
> >> + * or the signal at DP will be poor
> >> + * 2. The PLL's power and output to usb for host 1
> >> + * is totally controlled by IC, so the Software only needs
> >> + * to enable them at initializtion.
> >> + */
> >> + __raw_writel(ANADIG_USB2_CHRG_DETECT_EN_B |
> >> + ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B,
> >> + anatop_base + ANADIG_USB2_CHRG_DETECT);
> >> +
> >> + __raw_writel(ANADIG_USB2_PLL_480_CTRL_BYPASS,
> >> + anatop_base + ANADIG_USB2_PLL_480_CTRL_CLR);
> >> +
> >> + __raw_writel(ANADIG_USB2_PLL_480_CTRL_ENABLE |
> >> + ANADIG_USB2_PLL_480_CTRL_POWER |
> >> + ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS,
> >> + anatop_base + ANADIG_USB2_PLL_480_CTRL_SET);
> >
> > This part looks mx28ish
>
> Maybe. While searching I realized that the macros and register addresses
> are already defined in:
>
> arch/arm/include/asm/arch-mx6/ccm_regs.h
>
> >> +}
> >> +
> >> +static int usbh1_phy_enable(void)
> >> +{
> >> + void __iomem *phy_reg = (void __iomem *)USB_PHY1_BASE_ADDR;
> >> + void __iomem *phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
> >> + void __iomem *usb_cmd = (void __iomem *)(USBOH3_USB_BASE_ADDR +
> >> + USB_H1REGS_OFFSET +
> >> + UH1_USBCMD_OFFSET);
> >> + u32 val;
> >> +
> >> + /* Stop then Reset */
> >> + val = __raw_readl(usb_cmd);
> >> + val &= ~UCMD_RUN_STOP;
> >> + __raw_writel(val, usb_cmd);
> >> + while (__raw_readl(usb_cmd) & UCMD_RUN_STOP)
> >> + ;
> >> +
> >> + val = __raw_readl(usb_cmd);
> >> + val |= UCMD_RESET;
> >> + __raw_writel(val, usb_cmd);
> >> + while (__raw_readl(usb_cmd) & UCMD_RESET)
> >> + ;
> >> +
> >> + /* Reset USBPHY module */
> >> + val = __raw_readl(phy_ctrl);
> >> + val |= USBPHY_CTRL_SFTRST;
> >> + __raw_writel(val, phy_ctrl);
> >> + udelay(10);
> >
> > This part too.
> >
> >> +
> >> + /* Remove CLKGATE and SFTRST */
> >> + val = __raw_readl(phy_ctrl);
> >> + val &= ~(USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
> >> + __raw_writel(val, phy_ctrl);
> >> + udelay(10);
> >
> > This too, looks like mx28_reset_block(). But maybe I'm just paranoid and
> > spooky here :)
> >
> >> +
> >> + /* Power up the PHY */
> >> + __raw_writel(0, phy_reg + USBPHY_PWD);
> >> + /* enable FS/LS device */
> >> + val = __raw_readl(phy_reg + USBPHY_CTRL);
> >> + val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
> >> + __raw_writel(val, phy_reg + USBPHY_CTRL);
> >
> > And maybe not ... this looks like MX28 phy interface.
>
> I think MX6 and MX28 could share common register definitions. Note sure
> if both will share a lot of code though. To add MX6 USB support to
> ehci-mxs.c seems not straight-forward to me, at least. But I will have a
> closer look next week...
Cool, I believe FSL wanted to demonstrate they can mix alien DNA with human DNA
(in the words of X-Files ;-) ) ... or to put it simply, they wanted to
demonstrate they can use the MXS IP in their chips and maybe show the
acquisition of MXS wasn't a complete waste (this is just a conspiracy theory
though). They did similar crossbreed with mx53 bootrom.
Marek.
M
Marek.
PS. Good night, damn I'm tired :)
>
> Wolfgang.
>
> W
>
>
> Wolfgang.
More information about the U-Boot
mailing list