[U-Boot] [PATCH 3/8] microblaze: Enable phylib and mii support

[Michal Simek]

Stephan Linz wrote:
> From: Michal Simek <monstr at monstr.eu>
> 
> Enable phylib and mii support for LLTEMAC or AXI EMAC
> ethernet drivers on Microblaze systems.
> 
> Signed-off-by: Michal Simek <monstr at monstr.eu>
> Acked-by: Stephan Linz <linz at li-pro.net>
> ---
>  include/configs/microblaze-generic.h |   21 +++++++++++++++++++++
>  1 files changed, 21 insertions(+), 0 deletions(-)
> 
> diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
> index 09ac870..69fcdb6 100644
> --- a/include/configs/microblaze-generic.h
> +++ b/include/configs/microblaze-generic.h
> @@ -342,4 +342,25 @@
>  #define CONFIG_FIT		1
>  #define CONFIG_OF_LIBFDT	1
>  
> +#if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC)
> +# define CONFIG_MII		1
> +# define CONFIG_CMD_MII		1
> +# define CONFIG_PHY_GIGE	1
> +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
> +# define CONFIG_PHYLIB		1
> +# define CONFIG_PHY_ATHEROS	1
> +# define CONFIG_PHY_BROADCOM	1
> +# define CONFIG_PHY_DAVICOM	1
> +# define CONFIG_PHY_LXT		1
> +# define CONFIG_PHY_MARVELL	1
> +# define CONFIG_PHY_MICREL	1
> +# define CONFIG_PHY_NATSEMI	1
> +# define CONFIG_PHY_REALTEK	1
> +# define CONFIG_PHY_VITESSE	1
> +#else
> +# undef CONFIG_MII
> +# undef CONFIG_CMD_MII
> +# undef CONFIG_PHYLIB
> +#endif
> +
>  #endif	/* __CONFIG_H */

This is OK and should be enable at least for AXIEMAC even if ll_temac won't go to mainline.
Maybe make sense to do so without waiting for this patchset.

Michal



-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian