[U-Boot] [PATCH v5 5/5] i.mx6q: mx6qsabrelite: Update the network configuration

[Stefano Babic]

On 10/02/2012 22:02, Troy Kisky wrote:
> On 2/7/2012 5:08 PM, Troy Kisky wrote:
>> Define CONFIG_PHY_MICREL, and
>> minimize the tx clock delay.
>>
>> There is an issue with 1000 baseTx mode on early revs
>> of the SabreLite boards. The center tap pin 9 of the mag RJ45
>> USB combo was connected to the 3.3 filtered supply. Letting
>> this pin float solved the problem. Symptoms of the problem
>> were packets with many extra zeroes tacked on the end, and random
>> bit flips causing a high rate of CRC errors. 10/100 baseTx worked
>> fine on all revs. To disable 1000 baseTx for these boards, simply
>> define the environment variable disable_giga. ie.
>>
>> setenv disable_giga 1
>>
>> Signed-off-by: Troy Kisky<troy.kisky at boundarydevices.com>
>> Acked-by: Dirk Behme<dirk.behme at de.bosch.com>
>> ---
>>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |   51
>> +++++++------------------
>>   include/configs/mx6qsabrelite.h               |    2 +
>>   2 files changed, 16 insertions(+), 37 deletions(-)
>>
>> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> index a53b01f..2847539 100644
>> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>>
> This has a minor conflict with the recently applied
> 56c8eaf6cf44f8ec674fb863005e73250ad3d31c
> mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
> 
> Would you like me to resend 5/5,   1-5/5, or let you handle.

Do not worry, I solved the conflict myself. As I can understand, there
is not open issues with the patchset, and I will apply the patches after
Albert will merge my last pull request.

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================