[U-Boot] [PATCH 4/4] microblaze: Wire up LL_TEMAC driver initialization

Stephan Linz linz at li-pro.net
Sat Feb 25 11:48:34 CET 2012


Initialize ll_temac driver.

Reported-by: Michal Simek <monstr at monstr.eu>
Signed-off-by: Stephan Linz <linz at li-pro.net>
---
 .../xilinx/microblaze-generic/microblaze-generic.c |   36 ++++++++++++++++++++
 1 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index c4c13a6..a1e2bfe 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -90,5 +90,41 @@ int board_eth_init(bd_t *bis)
 	ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
 			txpp, rxpp);
 #endif
+
+#ifdef CONFIG_XILINX_LL_TEMAC
+# ifdef XILINX_LLTEMAC_BASEADDR
+#  ifdef XILINX_LLTEMAC_FIFO_BASEADDR
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR);
+#  elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR
+#   if XILINX_LLTEMAC_SDMA_USE_DCR == 1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_SDMA_DCR,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
+#   else
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
+			XILINX_LL_TEMAC_M_SDMA_PLB,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
+#   endif
+#  endif
+# endif
+# ifdef XILINX_LLTEMAC_BASEADDR1
+#  ifdef XILINX_LLTEMAC_FIFO_BASEADDR1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR1);
+#  elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1
+#   if XILINX_LLTEMAC_SDMA_USE_DCR == 1
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_SDMA_DCR,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
+#   else
+	ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
+			XILINX_LL_TEMAC_M_SDMA_PLB,
+			XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
+#   endif
+#  endif
+# endif
+#endif
+
 	return ret;
 }
-- 
1.7.0.4



More information about the U-Boot mailing list