[U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.
Govindraj.R
govindraj.raja at ti.com
Fri Feb 3 14:38:31 CET 2012
From: "Govindraj.R" <govindraj.raja at ti.com>
Extend the existing ulpi viewport framework
to pass the port number information for any ulpi
ops. Fix the usage of ulpi api's accordingly.
Tested-by: Stefano Babic <sbabic at denx.de>
Signed-off-by: Govindraj.R <govindraj.raja at ti.com>
---
board/efikamx/efikamx-usb.c | 24 ++++++++++------
drivers/usb/ulpi/ulpi-viewport.c | 30 ++++++++++----------
drivers/usb/ulpi/ulpi.c | 54 +++++++++++++++++++------------------
include/usb/ulpi.h | 36 +++++++++++++++++--------
4 files changed, 82 insertions(+), 62 deletions(-)
diff --git a/board/efikamx/efikamx-usb.c b/board/efikamx/efikamx-usb.c
index 840bd9a..ac2d2e9 100644
--- a/board/efikamx/efikamx-usb.c
+++ b/board/efikamx/efikamx-usb.c
@@ -120,6 +120,7 @@ static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
{
int ret;
struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
+ struct ulpi_viewport ulpi_vp;
mxc_request_iomux(stp_gpio, alt0);
mxc_iomux_set_pad(stp_gpio, PAD_CTL_DRV_HIGH |
@@ -133,23 +134,26 @@ static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
mxc_iomux_set_pad(stp_gpio, USB_PAD_CONFIG);
udelay(10000);
- ret = ulpi_init((u32)&ehci->ulpi_viewpoint);
+ ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
+ ulpi_vp.port_num = 0;
+
+ ret = ulpi_init(&ulpi_vp);
if (ret) {
printf("Efika USB ULPI initialization failed\n");
return;
}
/* ULPI set flags */
- ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl,
+ ulpi_write(&ulpi_vp, &ulpi->otg_ctrl,
ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN |
ULPI_OTG_EXTVBUSIND);
- ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->function_ctrl,
+ ulpi_write(&ulpi_vp, &ulpi->function_ctrl,
ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL |
ULPI_FC_SUSPENDM);
- ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->iface_ctrl, 0);
+ ulpi_write(&ulpi_vp, &ulpi->iface_ctrl, 0);
/* Set VBus */
- ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
+ ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
/*
@@ -158,8 +162,7 @@ static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
* NOTE: This violates USB specification, but otherwise, USB on Efika
* doesn't work.
*/
- ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
- ULPI_OTG_CHRGVBUS);
+ ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
}
int board_ehci_hcd_init(int port)
@@ -177,9 +180,12 @@ void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
uint32_t port = OTG_BASE_ADDR + (0x200 * CONFIG_MXC_USB_PORT);
struct usb_ehci *ehci = (struct usb_ehci *)port;
struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
+ struct ulpi_viewport ulpi_vp;
+
+ ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
+ ulpi_vp.port_num = 0;
- ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
- ULPI_OTG_CHRGVBUS);
+ ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
wait_ms(50);
diff --git a/drivers/usb/ulpi/ulpi-viewport.c b/drivers/usb/ulpi/ulpi-viewport.c
index 490fb0e..6f03f08 100644
--- a/drivers/usb/ulpi/ulpi-viewport.c
+++ b/drivers/usb/ulpi/ulpi-viewport.c
@@ -40,13 +40,13 @@
*
* returns 0 on mask match, ULPI_ERROR on time out.
*/
-static int ulpi_wait(u32 ulpi_viewport, u32 mask)
+static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask)
{
int timeout = CONFIG_USB_ULPI_TIMEOUT;
/* Wait for the bits in mask to become zero. */
while (--timeout) {
- if ((readl(ulpi_viewport) & mask) == 0)
+ if ((readl(ulpi_vp->viewport_addr) & mask) == 0)
return 0;
udelay(1);
@@ -60,16 +60,16 @@ static int ulpi_wait(u32 ulpi_viewport, u32 mask)
*
* returns 0 on success.
*/
-static int ulpi_wakeup(u32 ulpi_viewport)
+static int ulpi_wakeup(struct ulpi_viewport *ulpi_vp)
{
int err;
- if (readl(ulpi_viewport) & ULPI_SS)
+ if (readl(ulpi_vp->viewport_addr) & ULPI_SS)
return 0; /* already awake */
- writel(ULPI_WU, ulpi_viewport);
+ writel(ULPI_WU, ulpi_vp->viewport_addr);
- err = ulpi_wait(ulpi_viewport, ULPI_WU);
+ err = ulpi_wait(ulpi_vp, ULPI_WU);
if (err)
printf("ULPI wakeup timed out\n");
@@ -81,38 +81,38 @@ static int ulpi_wakeup(u32 ulpi_viewport)
*
* @value - the ULPI request
*/
-static int ulpi_request(u32 ulpi_viewport, u32 value)
+static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value)
{
int err;
- err = ulpi_wakeup(ulpi_viewport);
+ err = ulpi_wakeup(ulpi_vp);
if (err)
return err;
- writel(value, ulpi_viewport);
+ writel(value, ulpi_vp->viewport_addr);
- err = ulpi_wait(ulpi_viewport, ULPI_RWRUN);
+ err = ulpi_wait(ulpi_vp, ULPI_RWRUN);
if (err)
printf("ULPI request timed out\n");
return err;
}
-int ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value)
+int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value)
{
u32 val = ULPI_RWRUN | ULPI_RWCTRL | ((u32)reg << 16) | (value & 0xff);
- return ulpi_request(ulpi_viewport, val);
+ return ulpi_request(ulpi_vp, val);
}
-u32 ulpi_read(u32 ulpi_viewport, u8 *reg)
+u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg)
{
int err;
u32 val = ULPI_RWRUN | ((u32)reg << 16);
- err = ulpi_request(ulpi_viewport, val);
+ err = ulpi_request(ulpi_vp, val);
if (err)
return err;
- return (readl(ulpi_viewport) >> 8) & 0xff;
+ return (readl(ulpi_vp->viewport_addr) >> 8) & 0xff;
}
diff --git a/drivers/usb/ulpi/ulpi.c b/drivers/usb/ulpi/ulpi.c
index 6202227..dde2585 100644
--- a/drivers/usb/ulpi/ulpi.c
+++ b/drivers/usb/ulpi/ulpi.c
@@ -37,18 +37,18 @@
static struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
-static int ulpi_integrity_check(u32 ulpi_viewport)
+static int ulpi_integrity_check(struct ulpi_viewport *ulpi_vp)
{
u32 val, tval = ULPI_TEST_VALUE;
int err, i;
/* Use the 'special' test value to check all bits */
for (i = 0; i < 2; i++, tval <<= 1) {
- err = ulpi_write(ulpi_viewport, &ulpi->scratch, tval);
+ err = ulpi_write(ulpi_vp, &ulpi->scratch, tval);
if (err)
return err;
- val = ulpi_read(ulpi_viewport, &ulpi->scratch);
+ val = ulpi_read(ulpi_vp, &ulpi->scratch);
if (val != tval) {
printf("ULPI integrity check failed\n");
return val;
@@ -58,7 +58,7 @@ static int ulpi_integrity_check(u32 ulpi_viewport)
return 0;
}
-int ulpi_init(u32 ulpi_viewport)
+int ulpi_init(struct ulpi_viewport *ulpi_vp)
{
u32 val, id = 0;
u8 *reg = &ulpi->product_id_high;
@@ -66,7 +66,7 @@ int ulpi_init(u32 ulpi_viewport)
/* Assemble ID from four ULPI ID registers (8 bits each). */
for (i = 0; i < ULPI_ID_REGS_COUNT; i++) {
- val = ulpi_read(ulpi_viewport, reg - i);
+ val = ulpi_read(ulpi_vp, reg - i);
if (val == ULPI_ERROR)
return val;
@@ -76,10 +76,10 @@ int ulpi_init(u32 ulpi_viewport)
/* Split ID into vendor and product ID. */
debug("ULPI transceiver ID 0x%04x:0x%04x\n", id >> 16, id & 0xffff);
- return ulpi_integrity_check(ulpi_viewport);
+ return ulpi_integrity_check(ulpi_vp);
}
-int ulpi_select_transceiver(u32 ulpi_viewport, unsigned speed)
+int ulpi_select_transceiver(struct ulpi_viewport *ulpi_vp, unsigned speed)
{
u32 tspeed = ULPI_FC_FULL_SPEED;
u32 val;
@@ -96,17 +96,18 @@ int ulpi_select_transceiver(u32 ulpi_viewport, unsigned speed)
"falling back to full speed\n", __func__, speed);
}
- val = ulpi_read(ulpi_viewport, &ulpi->function_ctrl);
+ val = ulpi_read(ulpi_vp, &ulpi->function_ctrl);
if (val == ULPI_ERROR)
return val;
/* clear the previous speed setting */
val = (val & ~ULPI_FC_XCVRSEL_MASK) | tspeed;
- return ulpi_write(ulpi_viewport, &ulpi->function_ctrl, val);
+ return ulpi_write(ulpi_vp, &ulpi->function_ctrl, val);
}
-int ulpi_set_vbus(u32 ulpi_viewport, int on, int ext_power, int ext_ind)
+int ulpi_set_vbus(struct ulpi_viewport *ulpi_vp, int on, int ext_power,
+ int ext_ind)
{
u32 flags = ULPI_OTG_DRVVBUS;
u8 *reg = on ? &ulpi->otg_ctrl_set : &ulpi->otg_ctrl_clear;
@@ -116,18 +117,18 @@ int ulpi_set_vbus(u32 ulpi_viewport, int on, int ext_power, int ext_ind)
if (ext_ind)
flags |= ULPI_OTG_EXTVBUSIND;
- return ulpi_write(ulpi_viewport, reg, flags);
+ return ulpi_write(ulpi_vp, reg, flags);
}
-int ulpi_set_pd(u32 ulpi_viewport, int enable)
+int ulpi_set_pd(struct ulpi_viewport *ulpi_vp, int enable)
{
u32 val = ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN;
u8 *reg = enable ? &ulpi->otg_ctrl_set : &ulpi->otg_ctrl_clear;
- return ulpi_write(ulpi_viewport, reg, val);
+ return ulpi_write(ulpi_vp, reg, val);
}
-int ulpi_opmode_sel(u32 ulpi_viewport, unsigned opmode)
+int ulpi_opmode_sel(struct ulpi_viewport *ulpi_vp, unsigned opmode)
{
u32 topmode = ULPI_FC_OPMODE_NORMAL;
u32 val;
@@ -144,17 +145,17 @@ int ulpi_opmode_sel(u32 ulpi_viewport, unsigned opmode)
"falling back to OpMode Normal\n", __func__, opmode);
}
- val = ulpi_read(ulpi_viewport, &ulpi->function_ctrl);
+ val = ulpi_read(ulpi_vp, &ulpi->function_ctrl);
if (val == ULPI_ERROR)
return val;
/* clear the previous opmode setting */
val = (val & ~ULPI_FC_OPMODE_MASK) | topmode;
- return ulpi_write(ulpi_viewport, &ulpi->function_ctrl, val);
+ return ulpi_write(ulpi_vp, &ulpi->function_ctrl, val);
}
-int ulpi_serial_mode_enable(u32 ulpi_viewport, unsigned smode)
+int ulpi_serial_mode_enable(struct ulpi_viewport *ulpi_vp, unsigned smode)
{
switch (smode) {
case ULPI_IFACE_6_PIN_SERIAL_MODE:
@@ -166,14 +167,14 @@ int ulpi_serial_mode_enable(u32 ulpi_viewport, unsigned smode)
return ULPI_ERROR;
}
- return ulpi_write(ulpi_viewport, &ulpi->iface_ctrl_set, smode);
+ return ulpi_write(ulpi_vp, &ulpi->iface_ctrl_set, smode);
}
-int ulpi_suspend(u32 ulpi_viewport)
+int ulpi_suspend(struct ulpi_viewport *ulpi_vp)
{
int err;
- err = ulpi_write(ulpi_viewport, &ulpi->function_ctrl_clear,
+ err = ulpi_write(ulpi_vp, &ulpi->function_ctrl_clear,
ULPI_FC_SUSPENDM);
if (err)
printf("ULPI: %s: failed writing the suspend bit\n", __func__);
@@ -186,7 +187,7 @@ int ulpi_suspend(u32 ulpi_viewport)
* Actual wait for reset must be done in a view port specific way,
* because it involves checking the DIR line.
*/
-static int __ulpi_reset_wait(u32 ulpi_viewport)
+static int __ulpi_reset_wait(struct ulpi_viewport *ulpi_vp)
{
u32 val;
int timeout = CONFIG_USB_ULPI_TIMEOUT;
@@ -199,7 +200,7 @@ static int __ulpi_reset_wait(u32 ulpi_viewport)
* for the error of ulpi_read(), if there is one, then
* there will be a timeout.
*/
- val = ulpi_read(ulpi_viewport, &ulpi->function_ctrl);
+ val = ulpi_read(ulpi_vp, &ulpi->function_ctrl);
if (!(val & ULPI_FC_RESET))
return 0;
@@ -210,18 +211,19 @@ static int __ulpi_reset_wait(u32 ulpi_viewport)
return ULPI_ERROR;
}
-int ulpi_reset_wait(u32) __attribute__((weak, alias("__ulpi_reset_wait")));
+int ulpi_reset_wait(struct ulpi_viewport *ulpi_vp)
+ __attribute__((weak, alias("__ulpi_reset_wait")));
-int ulpi_reset(u32 ulpi_viewport)
+int ulpi_reset(struct ulpi_viewport *ulpi_vp)
{
int err;
- err = ulpi_write(ulpi_viewport,
+ err = ulpi_write(ulpi_vp,
&ulpi->function_ctrl_set, ULPI_FC_RESET);
if (err) {
printf("ULPI: %s: failed writing reset bit\n", __func__);
return err;
}
- return ulpi_reset_wait(ulpi_viewport);
+ return ulpi_reset_wait(ulpi_vp);
}
diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h
index 802f077..a036bab 100644
--- a/include/usb/ulpi.h
+++ b/include/usb/ulpi.h
@@ -28,12 +28,23 @@
#endif
/*
+ * ulpi view port address and
+ * Port_number that can be passed.
+ * Any additional data to be passed can
+ * be extended from this structure
+ */
+struct ulpi_viewport {
+ u32 viewport_addr;
+ u8 port_num;
+};
+
+/*
* Initialize the ULPI transciever and check the interface integrity.
- * @ulpi_viewport - the address of the ULPI viewport register.
+ * @ulpi_viewport - structure containing ULPI viewport data
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_init(u32 ulpi_viewport);
+int ulpi_init(struct ulpi_viewport *ulpi_vp);
/*
* Select transceiver speed.
@@ -41,7 +52,7 @@ int ulpi_init(u32 ulpi_viewport);
* ULPI_FC_LOW_SPEED, ULPI_FC_FS4LS
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_select_transceiver(u32 ulpi_viewport, unsigned speed);
+int ulpi_select_transceiver(struct ulpi_viewport *ulpi_vp, unsigned speed);
/*
* Enable/disable VBUS.
@@ -50,14 +61,15 @@ int ulpi_select_transceiver(u32 ulpi_viewport, unsigned speed);
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_enable_vbus(u32 ulpi_viewport, int on, int ext_power, int ext_ind);
+int ulpi_enable_vbus(struct ulpi_viewport *ulpi_vp,
+ int on, int ext_power, int ext_ind);
/*
* Enable/disable pull-down resistors on D+ and D- USB lines.
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_set_pd(u32 ulpi_viewport, int enable);
+int ulpi_set_pd(struct ulpi_viewport *ulpi_vp, int enable);
/*
* Select OpMode.
@@ -66,7 +78,7 @@ int ulpi_set_pd(u32 ulpi_viewport, int enable);
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_opmode_sel(u32 ulpi_viewport, unsigned opmode);
+int ulpi_opmode_sel(struct ulpi_viewport *ulpi_vp, unsigned opmode);
/*
* Switch to Serial Mode.
@@ -78,7 +90,7 @@ int ulpi_opmode_sel(u32 ulpi_viewport, unsigned opmode);
* Switches immediately to Serial Mode.
* To return from Serial Mode, STP line needs to be asserted.
*/
-int ulpi_serial_mode_enable(u32 ulpi_viewport, unsigned smode);
+int ulpi_serial_mode_enable(struct ulpi_viewport *ulpi_vp, unsigned smode);
/*
* Put PHY into low power mode.
@@ -89,14 +101,14 @@ int ulpi_serial_mode_enable(u32 ulpi_viewport, unsigned smode);
* STP line must be driven low to keep the PHY in suspend.
* To resume the PHY, STP line needs to be asserted.
*/
-int ulpi_suspend(u32 ulpi_viewport);
+int ulpi_suspend(struct ulpi_viewport *ulpi_vp);
/*
* Reset the transceiver. ULPI interface and registers are not affected.
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_reset(u32 ulpi_viewport);
+int ulpi_reset(struct ulpi_viewport *ulpi_vp);
/* ULPI access methods below must be implemented for each ULPI viewport. */
@@ -108,7 +120,7 @@ int ulpi_reset(u32 ulpi_viewport);
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value);
+int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value);
/*
* Read the ULPI PHY register content via the viewport.
@@ -116,14 +128,14 @@ int ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value);
*
* returns register content on success, ULPI_ERROR on failure.
*/
-u32 ulpi_read(u32 ulpi_viewport, u8 *reg);
+u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg);
/*
* Wait for the reset to complete.
* The Link must not attempt to access the PHY until the reset has
* completed and DIR line is de-asserted.
*/
-int ulpi_reset_wait(u32 ulpi_viewport);
+int ulpi_reset_wait(struct ulpi_viewport *ulpi_vp);
/* Access Extended Register Set (indicator) */
#define ACCESS_EXT_REGS_OFFSET 0x2f /* read-write */
--
1.7.5.4
More information about the U-Boot
mailing list