[U-Boot] Pull request u-boot-blackfin.git (master branch)

[Wolfgang Denk]

Dear Mike Frysinger,

In message <1329078374-32177-1-git-send-email-vapier at gentoo.org> you wrote:
> The following changes since commit 9cbfee6dc200cc746394c7efc10253a24f3ce108:
> 
>   fw_env.h: fix comment (2012-02-11 22:18:38 +0100)
> 
> are available in the git repository at:
>   git://www.denx.de/git/u-boot-blackfin.git master
> 
> Dimitar Penev (2):
>       Blackfin: pr1: new board port
>       Blackfin: br4: new board port
> 
> Macpaul Lin (1):
>       linkage.h: move from blackfin to common includes
> 
> Mike Frysinger (5):
>       Blackfin: bf537-stamp: drop board reset workaround
>       post: add blackfin to the post_time_ms list
>       Blackfin: add in/out le32 variants
>       Blackfin: bfin_nand: mark local func static
>       Blackfin: pata_bfin: fix printf warning
> 
>  MAINTAINERS                                |    5 +
>  arch/blackfin/cpu/cache.S                  |    2 +-
>  arch/blackfin/include/asm/blackfin_local.h |    2 +-
>  arch/blackfin/include/asm/cache.h          |    2 +-
>  arch/blackfin/include/asm/io.h             |    2 +
>  arch/blackfin/include/asm/linkage.h        |   50 +---------
>  arch/blackfin/lib/__kgdb.S                 |    2 +-
>  arch/blackfin/lib/outs.S                   |    2 +-
>  board/bf537-stamp/bf537-stamp.c            |    7 --
>  board/br4/Makefile                         |   50 +++++++++
>  board/br4/br4.c                            |   30 ++++++
>  board/br4/config.mk                        |   30 ++++++
>  board/pr1/Makefile                         |   50 +++++++++
>  board/pr1/config.mk                        |   30 ++++++
>  board/pr1/pr1.c                            |   30 ++++++
>  boards.cfg                                 |    2 +
>  drivers/block/pata_bfin.c                  |    2 +-
>  drivers/mtd/nand/bfin_nand.c               |    2 +-
>  include/configs/br4.h                      |  157 ++++++++++++++++++++++++++++
>  include/configs/pr1.h                      |  157 ++++++++++++++++++++++++++++
>  include/linux/linkage.h                    |   76 +++++++++++++
>  post/post.c                                |    3 +-
>  22 files changed, 630 insertions(+), 63 deletions(-)
>  create mode 100644 board/br4/Makefile
>  create mode 100644 board/br4/br4.c
>  create mode 100644 board/br4/config.mk
>  create mode 100644 board/pr1/Makefile
>  create mode 100644 board/pr1/config.mk
>  create mode 100644 board/pr1/pr1.c
>  create mode 100644 include/configs/br4.h
>  create mode 100644 include/configs/pr1.h
>  create mode 100644 include/linux/linkage.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
In the pitiful, multipage, connection-boxed form to which  the  flow-
chart  has  today  been  elaborated, it has proved to be useless as a
design tool -- programmers draw flowcharts after, not before, writing
the programs they describe.                        - Fred Brooks, Jr.