[U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup

[Marek Vasut]

> On 19/02/2012 10:23, Albert ARIBAUD wrote:
> > Hi Robert,
> > 
> > Le 15/02/2012 11:29, Robert at domain.unknown a écrit :
> >> From: Robert Delien<robert at delien.nl>
> >> 
> >> This set of patches fixes ref_cpu clock setup.
> >> 
> >> Robert Delien (4):
> >>    Renamed mx28_register to mx28_register_32 to prepare for
> >>    
> >>      mx28_register_8
> >>    
> >>    Introducing 8-bit wide register, mx28_register_8
> >>    Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1
> >>    
> >>      registers
> >>    
> >>    Preventing needless switching on and off PLL bypass mode, allowing
> >>    
> >>      allow single-stepping through the SPL
> > 
> > P
> > I don't see this V5 on patchwork. Please a V6 with up-to-date Tested-By
> > / Acked-By etc -- and of course make sure the e-mail address stays
> > correct.
> 
> > Besides, this touches i.MX, so I think Stefano should be at least Cc:
> Right - Robert, I miss also which is the state of the current patches -
> is there still an issue that avoid boards to boot ?

Yea ... that issue is fixed. I acked patches 1,2,3 ... I'm still unsure about 
patch 4.

M
> 
> Stefano