[U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup

[Stefano Babic]

On 19/02/2012 10:23, Albert ARIBAUD wrote:
> Hi Robert,
> 
> Le 15/02/2012 11:29, Robert at domain.unknown a écrit :
>> From: Robert Delien<robert at delien.nl>
>>
>> This set of patches fixes ref_cpu clock setup.
>>
>> Robert Delien (4):
>>    Renamed mx28_register to mx28_register_32 to prepare for
>>      mx28_register_8
>>    Introducing 8-bit wide register, mx28_register_8
>>    Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1
>>      registers
>>    Preventing needless switching on and off PLL bypass mode, allowing
>>      allow single-stepping through the SPL
> P
> I don't see this V5 on patchwork. Please a V6 with up-to-date Tested-By
> / Acked-By etc -- and of course make sure the e-mail address stays correct.
> 
> Besides, this touches i.MX, so I think Stefano should be at least Cc:

Right - Robert, I miss also which is the state of the current patches -
is there still an issue that avoid boards to boot ?

Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================