[U-Boot] [STATUS] [ARM]

[Marek Vasut]

> hi Albert,
> 
> On Sun, Feb 12, 2012 at 3:48 PM, Albert ARIBAUD
> 
> <albert.u.boot at aribaud.net>wrote:
> > Hi all,
> > 
> > I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for which
> > I just sent a pull request.
> > 
> > The raw result is:
> > 
> > --------------------- SUMMARY ----------------------------
> > Boards compiled: 283
> > Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
> > actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
> > dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
> > highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
> > km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
> > mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
> > mx53loco mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
> > omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
> > qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
> > vpac270_nor_256 vpac270_ond_256 )
> > ------------------------------**----------------------------
> 
> <snip>
> 
> > The rest:
> > 
> > cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
> > km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
> > omap1610inn_cs_autoboot portl2 twister
> > 
> > Fail with various causes; I'll send out individual status mails (CC:
> > interested parties) later today.
> 
> I pulled in a new u-boot-arm tree, and am able to compile both hawkboard
> and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a 2.21
> binutils. Can you please send me a log of the errors you get for the
> hawkboard. Thanks.

Can you please try with ELDK 5.1 and ELDK 4.2 ? These are toolchains that the u-
boot has to be compilable with without errors. If it isn't, there's a problem in 
the code.

M
> 
> -sughosh