[U-Boot] [PATCH 2/5] mx53ard: Use gpio_direction_input prior to gpio_get_value

[Fabio Estevam]

Use gpio_direction_input prior to gpio_get_value.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/freescale/mx53ard/mx53ard.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index 40b5c19..e90e39e 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -89,7 +89,9 @@ int board_mmc_getcd(struct mmc *mmc)
 	int ret;
 
 	mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
+	gpio_direction_input(1);
 	mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
+	gpio_direction_input(4);
 
 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		ret = !gpio_get_value(1); /* GPIO1_1 */
-- 
1.7.1