[U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q

[Marek Vasut]

> Atleast could that driver be enabled by any means? Please let me know if
> any such procedure is der to enable the driver. I'm very much confused as
> to start with it.

DO NOT TOP-POST!!!

What do you mean by "enabled by any means"?

M

> 
> Thanks and Regards,
> Shilpa
> ________________________________________
> From: u-boot-bounces at lists.denx.de [u-boot-bounces at lists.denx.de] on behalf
> of Marek Vasut [marek.vasut at gmail.com] Sent: 12 February, 2012 2:16 PM
> To: Dirk Behme
> Cc: Fabio Estevam; u-boot at lists.denx.de; Wolfgang Grandegger
> Subject: Re: [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
> 
> > On 11.02.2012 19:46, Fabio Estevam wrote:
> > > On Sat, Feb 11, 2012 at 5:12 AM, Marek Vasut<marek.vasut at gmail.com>  
wrote:
> > >> btw Fabio, do we support mx6q USB host in mainline Linux ?
> > > 
> > > Not yet, Marek.
> > 
> > Linaro has it working with
> > 
> > http://git.linaro.org/gitweb?p=bsp/freescale/linux-linaro.git;a=commit;h=
> > de 941f9ac0b59c34053618e90e3c1f1d8b5a2d22
> > 
> > http://git.linaro.org/gitweb?p=bsp/freescale/linux-linaro.git;a=commit;h=
> > 40 26cfa27332f2e53cfbf72cc98cf4db8c2f2127
> > 
> > It shouldn't be that hard to apply these to plain mainline Linux (?).
> 
> Do you believe this will be accepted into mainline Linux if basically the
> same stuff, except for mx28 did NOT get accepted? The shape of the code
> was almost identical, maybe better. Actually, even the file names are the
> same here and in the old FSL BSP for mx28.
> 
> M
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> ________________________________
> 
> DISCLAIMER:
> 
> This email may contain confidential information and is intended only for
> the use of the specific individual(s) to which it is addressed. If you are
> not the intended recipient of this email, you are hereby notified that any
> unauthorized use, dissemination or copying of this email or the
> information contained in it or attached to it is strictly prohibited. If
> you received this message in error, please immediately notify the sender
> at Infotech or Mail.Admin at infotech-enterprises.com and delete the original
> message.