[U-Boot] [PATCH v3 0/16] tegra: Add fdt definitions and USB driver

[Marek Vasut]

> This series brings in the kernel fdt file and provides a working
> USB driver for Tegra2 Seaboard.
> 
> (I have done this in one series since otherwise most of the fdt additions
> will just look like dead code.)
> 
> The driver requires CONFIG_OF_CONTROL and a device tree to operate.
> 
> Some enhancements to fdtdec are required to make this easier, and these
> are included in the series also. I have had to bring in basic GPIO
> support due to the request to put the USB VBUS into the fdt.
> 
> Since the kernel recently got a very minimal USB binding, I have started
> with that and extended it where appropriate.
> 
> Tegra likes to have cache-aligned buffers. I have dropped the patch which
> implements this since we will solve this problem by making callers align
> their buffers (as we did with MMC).
> 
> Changes in v2:
> - Use "okay" instead of "ok" for fdt node status
> - Remove 0x from fdt aliases
> - Rename params to timing
> - Store entire fdt config in port list, not just register pointer
> - Remove non-fdt operation of USB, since it is not needed
> - Decode USB VBUS GPIO from the fdt
> - Decode phy type differently (to match new kernel fdt)
> - Rename tegra20-usb to tegra20-ehcui (to match new kernel fdt)
> - Improve debug() printouts in case of failure to init USB
> - Add setting of pinmux for USB VBUS GPIO
> - Remove unneeded CONFIG_TEGRA_USBx defines
> 
> Changes in v3:
> - Remove "okay" from nodes since this is the default anyway
> - Fix device tree indenting with tabs instead of spaces
> - Disable USB2 which is not used on Seaboard
> - Remove usbparams properties from fdt and moved them to C code
> - Drop Tegra USB alignment patch as we will deal with this another way
> 
> Simon Glass (16):
>   fdt: Tidy up a few fdtdec problems
>   fdt: Add functions to access phandles, arrays and bools
>   Add gpio_request() to asm-generic header
>   fdt: Add basic support for decoding GPIO definitions
>   arm: fdt: Ensure that an embedded fdt is word-aligned
>   arm: fdt: Add skeleton device tree file from kernel
>   tegra: fdt: Add Tegra2x device tree file from kernel
>   tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
>   tegra: usb: fdt: Add additional device tree definitions for USB ports
>   tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
>   usb: Add support for txfifo threshold
>   tegra: usb: Add support for Tegra USB peripheral
>   tegra: usb: Add USB support to nvidia boards
>   tegra: usb: Add common USB defines for tegra2 boards
>   tegra: usb: Enable USB on Seaboard
>   tegra: fdt: Enable FDT support for Seaboard
> 
>  README                                    |    3 +
>  arch/arm/cpu/armv7/tegra2/Makefile        |    4 +-
>  arch/arm/cpu/armv7/tegra2/config.mk       |    2 +
>  arch/arm/cpu/armv7/tegra2/usb.c           |  430
> +++++++++++++++++++++++++++++ arch/arm/cpu/armv7/u-boot.lds             | 
>   5 +
>  arch/arm/dts/skeleton.dtsi                |   13 +
>  arch/arm/dts/tegra20.dtsi                 |  172 ++++++++++++
>  arch/arm/include/asm/arch-tegra2/tegra2.h |    2 +
>  arch/arm/include/asm/arch-tegra2/usb.h    |  255 +++++++++++++++++
>  board/nvidia/common/board.c               |    8 +
>  board/nvidia/dts/tegra2-seaboard.dts      |   47 ++++
>  drivers/usb/host/Makefile                 |    1 +
>  drivers/usb/host/ehci-hcd.c               |    7 +
>  drivers/usb/host/ehci-tegra.c             |   63 +++++
>  drivers/usb/host/ehci.h                   |    6 +-
>  dts/Makefile                              |    2 +-
>  include/asm-generic/gpio.h                |   10 +
>  include/configs/seaboard.h                |   12 +
>  include/configs/tegra2-common.h           |   14 +
>  include/fdtdec.h                          |  109 +++++++-
>  lib/fdtdec.c                              |  168 +++++++++++-
>  21 files changed, 1320 insertions(+), 13 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/tegra2/usb.c
>  create mode 100644 arch/arm/dts/skeleton.dtsi
>  create mode 100644 arch/arm/dts/tegra20.dtsi
>  create mode 100644 arch/arm/include/asm/arch-tegra2/usb.h
>  create mode 100644 board/nvidia/dts/tegra2-seaboard.dts
>  create mode 100644 drivers/usb/host/ehci-tegra.c

Hi,

what's the status of this patch/patchset?

Thanks
M