[U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q

[Shilpa Budhihal]

Atleast could that driver be enabled by any means? Please let me know if any such procedure is der to enable the driver. I'm very much confused as to start with it.

Thanks and Regards,
Shilpa
________________________________________
From: u-boot-bounces at lists.denx.de [u-boot-bounces at lists.denx.de] on behalf of Marek Vasut [marek.vasut at gmail.com]
Sent: 12 February, 2012 2:16 PM
To: Dirk Behme
Cc: Fabio Estevam; u-boot at lists.denx.de; Wolfgang Grandegger
Subject: Re: [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q

> On 11.02.2012 19:46, Fabio Estevam wrote:
> > On Sat, Feb 11, 2012 at 5:12 AM, Marek Vasut<marek.vasut at gmail.com>  wrote:
> >> btw Fabio, do we support mx6q USB host in mainline Linux ?
> >
> > Not yet, Marek.
>
> Linaro has it working with
>
> http://git.linaro.org/gitweb?p=bsp/freescale/linux-linaro.git;a=commit;h=de
> 941f9ac0b59c34053618e90e3c1f1d8b5a2d22
>
> http://git.linaro.org/gitweb?p=bsp/freescale/linux-linaro.git;a=commit;h=40
> 26cfa27332f2e53cfbf72cc98cf4db8c2f2127
>
> It shouldn't be that hard to apply these to plain mainline Linux (?).

Do you believe this will be accepted into mainline Linux if basically the same
stuff, except for mx28 did NOT get accepted? The shape of the code was almost
identical, maybe better. Actually, even the file names are the same here and in
the old FSL BSP for mx28.

M
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

________________________________

DISCLAIMER:

This email may contain confidential information and is intended only for the use of the specific individual(s) to which it is addressed. If you are not the intended recipient of this email, you are hereby notified that any unauthorized use, dissemination or copying of this email or the information contained in it or attached to it is strictly prohibited. If you received this message in error, please immediately notify the sender at Infotech or Mail.Admin at infotech-enterprises.com and delete the original message.