[U-Boot] [PATCH v3 7/7] usb: ulpi: Add omap-ulpi-view port support
Govindraj.R
govindraj.raja at ti.com
Fri Feb 3 14:38:32 CET 2012
From: "Govindraj.R" <govindraj.raja at ti.com>
Based on discussion from this thread [1].
Adding omap-view port that helps us in using the generic ulpi
framework for any ulpi phy ops using the INSNREG05_ULPI viewport
reg available on omap platform.
Currently ehci ports are available on omap3/4 platforms so enable the same
for beagle and panda, patch is tested on the same boards.
Thanks to Igor Grinberg <grinberg at compulab.co.il> for reviewing the
omap-ehci patches and suggesting this approach.
[1]: http://www.mail-archive.com/u-boot@lists.denx.de/msg76076.html
Tested-by: Stefano Babic <sbabic at denx.de>
Signed-off-by: Govindraj.R <govindraj.raja at ti.com>
---
doc/README.omap-ulpi-viewport | 27 +++++++++
drivers/usb/ulpi/Makefile | 1 +
drivers/usb/ulpi/omap-ulpi-viewport.c | 105 +++++++++++++++++++++++++++++++++
include/configs/omap3_beagle.h | 3 +
include/configs/omap4_panda.h | 2 +
5 files changed, 138 insertions(+), 0 deletions(-)
create mode 100644 doc/README.omap-ulpi-viewport
create mode 100644 drivers/usb/ulpi/omap-ulpi-viewport.c
diff --git a/doc/README.omap-ulpi-viewport b/doc/README.omap-ulpi-viewport
new file mode 100644
index 0000000..19feecd
--- /dev/null
+++ b/doc/README.omap-ulpi-viewport
@@ -0,0 +1,27 @@
+Reference code ""drivers/usb/ulpi/omap-ulpi-viewport.c"
+
+Contains the ulpi read write api's to perform
+any ulpi phy port access on omap platform.
+
+On omap ehci reg map contains INSNREG05_ULPI
+register which offers the ulpi phy access so
+any ulpi phy commands can be passsed using this
+register.
+
+omap-ulpi-viewport.c is a low level function
+implementation of "drivers/usb/ulpi/ulpi.c"
+
+To enable and use omap-ulpi-viewport.c
+we requires CONFIG_USB_ULPI_VIEWPORT_OMAP and
+CONFIG_USB_ULPI be enabled from config file.
+
+Any ulpi ops request can be done with ulpi.c
+and soc specific binding and usage is done with
+omap-ulpi-viewport implementation.
+
+Ex: scenario:
+omap-ehci driver code requests for ulpi phy reset if
+ehci is used in phy mode, which will call ulpi phy reset
+the ulpi phy reset does ulpi_read/write from viewport
+implementation which will do ulpi reset using the
+INSNREG05_ULPI register.
diff --git a/drivers/usb/ulpi/Makefile b/drivers/usb/ulpi/Makefile
index d43b229..281eb1c 100644
--- a/drivers/usb/ulpi/Makefile
+++ b/drivers/usb/ulpi/Makefile
@@ -24,6 +24,7 @@ LIB := $(obj)libusb_ulpi.o
COBJS-$(CONFIG_USB_ULPI) += ulpi.o
COBJS-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi-viewport.o
+COBJS-$(CONFIG_USB_ULPI_VIEWPORT_OMAP) += omap-ulpi-viewport.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/usb/ulpi/omap-ulpi-viewport.c b/drivers/usb/ulpi/omap-ulpi-viewport.c
new file mode 100644
index 0000000..66b1795
--- /dev/null
+++ b/drivers/usb/ulpi/omap-ulpi-viewport.c
@@ -0,0 +1,105 @@
+/*
+ * OMAP ulpi viewport support
+ * Based on drivers/usb/ulpi/ulpi-viewport.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Govindraj R <govindraj.raja at ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb/ulpi.h>
+
+#define OMAP_ULPI_WR_OPSEL (3 << 21)
+#define OMAP_ULPI_ACCESS (1 << 31)
+
+/*
+ * Wait for the ULPI Access to complete
+ */
+static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask)
+{
+ int timeout = CONFIG_USB_ULPI_TIMEOUT;
+
+ while (--timeout) {
+ if ((readl(ulpi_vp->viewport_addr) & mask))
+ return 0;
+
+ udelay(1);
+ }
+
+ return ULPI_ERROR;
+}
+
+/*
+ * Wake the ULPI PHY up for communication
+ *
+ * returns 0 on success.
+ */
+static int ulpi_wakeup(struct ulpi_viewport *ulpi_vp)
+{
+ int err;
+
+ if (readl(ulpi_vp->viewport_addr) & OMAP_ULPI_ACCESS)
+ return 0; /* already awake */
+
+ writel(OMAP_ULPI_ACCESS, ulpi_vp->viewport_addr);
+
+ err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
+ if (err)
+ debug("ULPI wakeup timed out\n");
+
+ return err;
+}
+
+/*
+ * Issue a ULPI read/write request
+ */
+static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value)
+{
+ int err;
+
+ err = ulpi_wakeup(ulpi_vp);
+ if (err)
+ return err;
+
+ writel(value, ulpi_vp->viewport_addr);
+
+ err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
+ if (err)
+ debug("ULPI request timed out\n");
+
+ return err;
+}
+
+int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value)
+{
+ u32 val = ((ulpi_vp->port_num & 0x7) << 24) |
+ OMAP_ULPI_WR_OPSEL | ((u32)reg << 16) | (value & 0xff);
+
+ return ulpi_request(ulpi_vp, val);
+}
+
+u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg)
+{
+ int err;
+ u32 val = ((ulpi_vp->port_num & 0x7) << 24) |
+ OMAP_ULPI_WR_OPSEL | ((u32)reg << 16);
+
+ err = ulpi_request(ulpi_vp, val);
+ if (err)
+ return err;
+
+ return readl(ulpi_vp->viewport_addr) & 0xff;
+}
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index b4d6443..b3b5651 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -130,6 +130,9 @@
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT_OMAP
+
/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 23c0230..0afcdd4 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -38,6 +38,8 @@
#define CONFIG_USB_HOST
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
--
1.7.5.4
More information about the U-Boot
mailing list