[U-Boot] [STATUS] [ARM]

Tom Rini tom.rini at gmail.com
Sun Feb 12 15:39:30 CET 2012


On Sun, Feb 12, 2012 at 7:35 AM, Albert ARIBAUD
<albert.u.boot at aribaud.net> wrote:
> Hi, Sughosh,
>
> Le 12/02/2012 15:03, Sughosh Ganu a écrit :
>
>> hi Albert,
>>
>> On Sun, Feb 12, 2012 at 3:48 PM, Albert ARIBAUD
>> <albert.u.boot at aribaud.net>wrote:
>>
>>> Hi all,
>>>
>>> I just did a ./MAKEALL arm with ELDK42 on the u-boot-arm/master for which
>>> I just sent a pull request.
>>>
>>> The raw result is:
>>>
>>> --------------------- SUMMARY ----------------------------
>>> Boards compiled: 283
>>> Boards with warnings or errors: 61 ( actux1_4_16 actux1_4_32 actux1_8_16
>>> actux1_8_32 actux2 actux3 actux4 ca9x4_ct_vxp cam_enc_4xx colibri_pxa270
>>> dvlhost efikamx efikasb ethernut5 flea3 harmony hawkboard hawkboard_uart
>>> highbank imx27lite imx31_litekit imx31_phycore imx31_phycore_eet
>>> km_kirkwood km_kirkwood_pci m28evk magnesium mcx medcom mgcoge3un
>>> mt_ventoux mx28evk mx31ads mx31pdk mx35pdk mx51evk mx53ard mx53evk
>>> mx53loco
>>> mx53smd mx6qarm2 mx6qsabrelite nhk8815 nhk8815_onenand
>>> omap1610h2_cs_autoboot omap1610inn_cs_autoboot paz00 pdnb3 plutux portl2
>>> qong scpu seaboard tt01 twister ventana vision2 vpac270_nor_128
>>> vpac270_nor_256 vpac270_ond_256 )
>>> ------------------------------**----------------------------
>>>
>>>
>> <snip>
>>
>>
>>> The rest:
>>>
>>> cam_enc_4xx ethernut5 hawkboard hawkboard_uart highbank km_kirkwood
>>> km_kirkwood_pci mcx mgcoge3un mt_ventoux omap1610h2_cs_autoboot
>>> omap1610inn_cs_autoboot portl2 twister
>>>
>>> Fail with various causes; I'll send out individual status mails (CC:
>>> interested parties) later today.
>>>
>>>
>> I pulled in a new u-boot-arm tree, and am able to compile both hawkboard
>> and hawkboard_uart fine. I use a 4.6.2 based gcc(arm-none-eabi) and a 2.21
>> binutils. Can you please send me a log of the errors you get for the
>> hawkboard. Thanks.
>
>
> Sure, here is what I get with ELDK4.2:
>
> uboot at lilith:~/src/u-boot-arm$ ./MAKEALL hawkboard
> Configuring for hawkboard board...
> arch/arm/cpu/arm926ejs/davinci/libdavinci.o: In function `lldiv':
> /home/uboot/src/u-boot-arm/include/div64.h:45: undefined reference to
> `__div64_32'
> drivers/mtd/nand/libnand.o: In function `nand_command':
> /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:586: undefined
> reference to `udelay'
> /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:602: undefined
> reference to `udelay'
> /home/uboot/src/u-boot-arm/drivers/mtd/nand/nand_base.c:608: undefined
> reference to `udelay'
> make[1]: *** [/home/uboot/src/u-boot-arm/spl/u-boot-spl] Erreur 1
> make: *** [spl/u-boot-spl.bin] Erreur 2
>   text    data     bss     dec     hex filename
>  191224    6388   54664  252276   3d974 ./u-boot
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 1
> Boards with warnings or errors: 1 ( hawkboard )
> ----------------------------------------------------------

Hmm, built-in udelay w/ newer toolchains, not in older ones?

-- 
Tom


More information about the U-Boot mailing list