[U-Boot] OMAP USB, beagle-xm fail

Tom Rini trini at ti.com
Mon Feb 13 15:24:14 CET 2012


On Mon, Feb 13, 2012 at 4:46 AM, Patil, Rachna <rachna at ti.com> wrote:
> Hi Govindraj,
>
> On Mon, Feb 13, 2012 at 14:29:56, Govindraj wrote:
>> Hi Peter,
>>
>> On Mon, Feb 13, 2012 at 1:52 PM, Peter Meerwald <pmeerw at pmeerw.net> wrote:
>> > Hello,
>> >
>> > the recent OMAP USB changes (43b62393da6dfdd7f503d1b37344463a05ea47b5,
>> > 29321c0518d99494ab2a250e5b4f75b3add83b11) fail on beagleboard-xm rev.
>> > C, see below
>>
>> The errors have nothing to do with ehci patch merges, (I had tested it on beagle rev c board before posting it out)
>>
>> Looking into it closely the below two patches are causing this issue:
>>
>> [...]
>> commit 498cbdfe62a8330f6c89765bdd15e60328a26511
>> Author: Patil, Rachna <rachna at ti.com>
>> Date:   Sun Jan 22 23:46:23 2012 +0000
>>
>> ARM: AM33XX: Add AM33XX I2C driver support
>>
>> commit 2faa76196af4b3e93bcb9e38ed9090cbd3b06db3
>> Author: Patil, Rachna <rachna at ti.com>
>> Date:   Sun Jan 22 23:44:12 2012 +0000
>>
>> ARM: I2C: I2C Multi byte address support [...]
>>
>> Reverting these two patches I don't see these errors on my beagle rev c board logs as in here [1]
>
> I have tested these patches on AM335x EVM, AM335x Beaglebone and OMAP35xx.
> I did not face any issues w.r.t these EVM's.
> I tried i2c probe, read/write and all of it worked as expected.
> Also from the logs in [1] I still see an I2C error " wait_for_bb: I2C_STAT=1000",
> which is bus busy indication.

To be clear, I assume you're looking for one of the omap37xx platforms
to see why the busy changes have broken it.  Thanks.

-- 
Tom


More information about the U-Boot mailing list