[U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs

[Tom Rini]

On Mon, Feb 27, 2012 at 6:51 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
>> Hi Marek,
>>
>> On Mon, Feb 27, 2012 at 4:43 AM, Marek Vasut <marex at denx.de> wrote:
>> >> From: "Govindraj.R" <govindraj.raja at ti.com>
>> >>
>> >> Clean up ehci-omap added and make it generic to extend support for omap4
>> >> socs. Add ehci support for panda board.
>> >>
>> >> Patch series depends on below patch:
>> >>       http://patchwork.ozlabs.org/patch/130952/
>> >>
>> >> Patch series based commit id:
>> >>       9a420986cccc9bd2c37affd931d627b3c3e72952
>> >>
>> >> This patch series long with above dependent patch is avialable at:
>> >>       git://gitorious.org/denx_u-boot/denx_uboot_omap.git
>> >>       v2_ehci_omap4
>> >>
>> >> Fatls, ping and tftp was tested with this patch series.
>> >> Test log for Panda available here:
>> >>       http://pastebin.pandaboard.org/index.php/view/55361716
>> >> Test log for Beagle-XM available here:
>> >>       http://pastebin.pandaboard.org/index.php/view/98437825
>> >
>> > Hi,
>> >
>> > what's the status of this patch/patchset?
>>
>> It's merged.
>>
>> ubnuser at ula0131859:~/clones/mainline_loaders/u-boot$ gls dd54d31..49be71c
>> 49be71c  OMAP4: ehci-omap: enable ehci-omap for panda boards (2 weeks ago)
>> 860004c  OMAP4: clock-common: Move the usb dppl configuration to new
>> func (2 weeks ago)
>> 95f8791  OMAP3+: Clock: Adding ehci clock enabling (2 weeks ago)
>> 43b6239  ehci-omap: Clean up added ehci-omap.c (2 weeks ago)
>> 29321c0  ehci-omap: driver for EHCI host on OMAP3 (2 weeks ago)
>> 928c4bd  usb: ulpi: Add omap-ulpi-view port support (2 weeks ago)
>> 3e6e809  usb: ulpi: Extend the existing ulpi framework. (2 weeks ago)
>
> That's good. Thank you. Cleaned up in patchwork

Cleaned up how?  I had been (I thought...) keeping the old serieses
marked as superseded/changes requested/etc and the one that made it in
accepted.  Thanks.

-- 
Tom