[U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs

Marek Vasut marek.vasut at gmail.com
Mon Feb 27 17:29:27 CET 2012


> On Mon, Feb 27, 2012 at 6:51 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> >> Hi Marek,
> >> 
> >> On Mon, Feb 27, 2012 at 4:43 AM, Marek Vasut <marex at denx.de> wrote:
> >> >> From: "Govindraj.R" <govindraj.raja at ti.com>
> >> >> 
> >> >> Clean up ehci-omap added and make it generic to extend support for
> >> >> omap4 socs. Add ehci support for panda board.
> >> >> 
> >> >> Patch series depends on below patch:
> >> >>       http://patchwork.ozlabs.org/patch/130952/
> >> >> 
> >> >> Patch series based commit id:
> >> >>       9a420986cccc9bd2c37affd931d627b3c3e72952
> >> >> 
> >> >> This patch series long with above dependent patch is avialable at:
> >> >>       git://gitorious.org/denx_u-boot/denx_uboot_omap.git
> >> >>       v2_ehci_omap4
> >> >> 
> >> >> Fatls, ping and tftp was tested with this patch series.
> >> >> Test log for Panda available here:
> >> >>       http://pastebin.pandaboard.org/index.php/view/55361716
> >> >> Test log for Beagle-XM available here:
> >> >>       http://pastebin.pandaboard.org/index.php/view/98437825
> >> > 
> >> > Hi,
> >> > 
> >> > what's the status of this patch/patchset?
> >> 
> >> It's merged.
> >> 
> >> ubnuser at ula0131859:~/clones/mainline_loaders/u-boot$ gls
> >> dd54d31..49be71c 49be71c  OMAP4: ehci-omap: enable ehci-omap for panda
> >> boards (2 weeks ago) 860004c  OMAP4: clock-common: Move the usb dppl
> >> configuration to new func (2 weeks ago)
> >> 95f8791  OMAP3+: Clock: Adding ehci clock enabling (2 weeks ago)
> >> 43b6239  ehci-omap: Clean up added ehci-omap.c (2 weeks ago)
> >> 29321c0  ehci-omap: driver for EHCI host on OMAP3 (2 weeks ago)
> >> 928c4bd  usb: ulpi: Add omap-ulpi-view port support (2 weeks ago)
> >> 3e6e809  usb: ulpi: Extend the existing ulpi framework. (2 weeks ago)
> > 
> > That's good. Thank you. Cleaned up in patchwork
> 
> Cleaned up how?  I had been (I thought...) keeping the old serieses
> marked as superseded/changes requested/etc and the one that made it in
> accepted.  Thanks.

There was a patch that was not marked in any way, so I set it to superseded.

M


More information about the U-Boot mailing list