[U-Boot] [PATCH 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information

Fabio Estevam fabio.estevam at freescale.com
Fri Feb 10 16:34:02 CET 2012


MX35PDK board does not need to print CPU revision and reset cause in board file
because this is printed by common code when CONFIG_DISPLAY_CPUINFO is selected

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Stefano,

I don't have a mx35pdk board handy to try this.

 board/freescale/mx35pdk/mx35pdk.c |   25 -------------------------
 1 files changed, 0 insertions(+), 25 deletions(-)

diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index a5b51a0..5f24fed 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -263,10 +263,6 @@ int board_late_init(void)
 
 int checkboard(void)
 {
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 cpu_rev = get_cpu_rev();
-
 	/*
 	 * Be sure that I2C is initialized to check
 	 * the board revision
@@ -276,27 +272,6 @@ int checkboard(void)
 	/* Print board revision */
 	printf("Board: MX35 PDK %d.0 ", ((get_board_rev() >> 8) + 1) & 0x0F);
 
-	/* Print CPU revision */
-	printf("i.MX35 %d.%d [", (cpu_rev & 0xF0) >> 4, cpu_rev & 0x0F);
-
-	switch (readl(&ccm->rcsr) & 0x0F) {
-	case 0x0000:
-		puts("POR");
-		break;
-	case 0x0002:
-		puts("JTAG");
-		break;
-	case 0x0004:
-		puts("RST");
-		break;
-	case 0x0008:
-		puts("WDT");
-		break;
-	default:
-		puts("unknown");
-	}
-	puts("]\n");
-
 	return 0;
 }
 
-- 
1.7.1




More information about the U-Boot mailing list