[U-Boot] [PATCH v2 0/2] usb/mx6q: USB EHCI support for MX6Q boards

[Dirk Behme]

On 09.02.2012 09:33, Wolfgang Grandegger wrote:
> v1 was bad, sorry. v2 fixes various issues reported by Dirk and Fabio.
> The patches are based on head of Stefano's "u-boot-imx" tree.
> 
> Wolfgang
> 
> Wolfgang Grandegger (2):
>   usb/ehci: Add USB support for the MX6Q
>   mx6qsabrelite: add and enable USB Host 1 support
> 
>  arch/arm/cpu/armv7/mx6/clock.c                |   13 ++
>  arch/arm/include/asm/arch-mx6/clock.h         |    1 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h      |    3 +
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c |   18 +++
>  drivers/usb/host/Makefile                     |    1 +
>  drivers/usb/host/ehci-mx6.c                   |  205 +++++++++++++++++++++++++
>  include/configs/mx6qsabrelite.h               |   13 ++
>  7 files changed, 254 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/usb/host/ehci-mx6.c

Whole series:

Acked-by: Dirk Behme <dirk.behme at de.bosch.com>

Tested-by: Dirk Behme <dirk.behme at de.bosch.com>

on the SabreLite with an USB stick (USB storage) and some fatls commands 
to see if the content of the stick is visible.

Many thanks

Dirk