[U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number

[Albert ARIBAUD]

Le 09/01/2012 09:30, Nikita Kiryanov a écrit :
> On 01/05/2012 04:56 PM, Wolfgang Denk wrote:
>> Dear Igor Grinberg,
>>
>> In message<1325764937-7342-1-git-send-email-grinberg at compulab.co.il>
>> you wrote:
>>> From: Nikita Kiryanov<nikita at compulab.co.il>
>>>
>>> Add board specific EEPROM handling module,
>>> read the serial number from the EEPROM and pass it to Linux.
>> ...
>>
>>> * Fix strange linker warning: ".bss section overlaps previous sections"
>>> by changing the type of the eeprom_layout static global variable to int
>>> (probably this is a compiler bug).
>> Probably it is now. Did you inspect the linke rmap?
>
> u-boot.map shows the bss section aligning perfectly with the start of
> rel.dyn.
>
> The difference between the original "working" version and the version
> with the warning
> was an additional byte added by uchar eeprom_layout to the size of
> libcm_t35.o.
> This shouldn't be a problem because the bss section is followed by an
> ALIGN(4), but
> we decided to try changing eeprom_layout to an int and the problem went
> away.
> When we tried to define 4 uchars the problem reappeared.
>
> This suggests that this might be a compiler bug.
>
> There's been some discussion about this in the following threads:
> http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/114646
> http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/90723
> and we're not aware of any fix to the issue.

Which prompted me to test --no-check-sections with CS 2009q1. Adding it 
to LDFLAGS_u-boot does reduce the annoyance from errors to a warning, 
but there is no way to completely make it disappear.

Amicalement,
-- 
Albert.