[U-Boot] PR1-Appliance UART Boot Issue

Mike Frysinger vapier at gentoo.org
Wed Feb 22 19:46:18 CET 2012


On Wednesday 22 February 2012 12:54:22 Amber and Sarosh wrote:
> We are compiling from these sources:
> https://switchfin.svn.sourceforge.net/svnroot/switchfin/switchfin/trunkhttp
> s://switchfin.svn.sourceforge.net/svnroot/switchfin/switchfin/tags/br4-ui2.
> 15
> https://blackfin.uclinux.org/gf/download/frsrelease/360/3630/u-boot-trunk-
> svn.src.tar.bz2https://blackfin.uclinux.org/gf/download/frsrelease/533/9651
> /u-boot-2011.11-2011R1-RC5.tar.bz2

well, you'll prob have to wait for feedback from the switchfin guys.  what you 
describe sounds right, and the bf537-stamp boots, so that's good.

off the top of my head, you'll want to make sure you do `make clean` before 
doing `make xxx_config` to be sure all previous objects have been removed.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120222/28f4a4a9/attachment.pgp>


More information about the U-Boot mailing list