[U-Boot] PR1-Appliance UART Boot Issue

[Amber and Sarosh]

We did that too.. Even if its a compilation error, the precompiled u-boot for PR1 Appliance should have worked atleast, but it does not.

> From: vapier at gentoo.org
> To: amber_sarosh at hotmail.com
> Subject: Re: [U-Boot] PR1-Appliance UART Boot Issue
> Date: Wed, 22 Feb 2012 13:46:18 -0500
> CC: u-boot at lists.denx.de; dpn at switchfin.org
> 
> On Wednesday 22 February 2012 12:54:22 Amber and Sarosh wrote:
> > We are compiling from these sources:
> > https://switchfin.svn.sourceforge.net/svnroot/switchfin/switchfin/trunkhttp
> > s://switchfin.svn.sourceforge.net/svnroot/switchfin/switchfin/tags/br4-ui2.
> > 15
> > https://blackfin.uclinux.org/gf/download/frsrelease/360/3630/u-boot-trunk-
> > svn.src.tar.bz2https://blackfin.uclinux.org/gf/download/frsrelease/533/9651
> > /u-boot-2011.11-2011R1-RC5.tar.bz2
> 
> well, you'll prob have to wait for feedback from the switchfin guys.  what you 
> describe sounds right, and the bf537-stamp boots, so that's good.
> 
> off the top of my head, you'll want to make sure you do `make clean` before 
> doing `make xxx_config` to be sure all previous objects have been removed.
> -mike