[U-Boot] Craneboard with Uboot and xloader

[Mohamed HAMZAOUI]

After trying to correct this issue, i have a difficult problem :( the
booting freeze in "Starting kernel..." and it can't decompressing the
uImage and starting the kernel.
for information i choosed the kernel 2.6.39.4 in buildroot configuration
with am3517_crane_defconfig file (a defconfig for version 2.6.32 that i
copied manually) that i found in craneboard-kernel gitorious.

Best regards
Mohamed

On Sat, Feb 25, 2012 at 3:35 PM, Tom Rini <trini at ti.com> wrote:

> On Sat, Feb 25, 2012 at 6:00 AM, Mohamed HAMZAOUI <requinham at gmail.com>
> wrote:
> > Hi M Tom,
> > I checked the file am3517_crane.h and it well use "rescan" instead of
> "init"
> >  but the problem is that after compilation, when I check the bootcmd I
> find
> > another one with init and not with rescan !
> > When i tried to change the variable with the setenv command, the system
> boot
> >  correctly from the SD card.
> > Can you tell me how I can fix that and why the compilation or the MLO,
> > u-boot.img files not have the correct bootcmd ?
>
> Ah, how about this, you've been using the board previously, yes?  It
> probably had a saved environment from a previous version written to
> NAND and was using that.  You might want to try doing 'nand erase
> 260000 20000' to erase the old environment, then reset the board to
> get the full, new, default environment.
>
> --
> Tom
>