[U-Boot] [PATCH 2/5] SMDK5250: LPDDR2: Renaming the PHY_RESET_VAL macro and fixing a minor typo.

[Hatim Ali]

The patch renames the macro PHY_RESET_VAL to LPDDR3PHY_CTRL_PHY_RESET for
clarity and also fixes a minor typo error to make the bit description similar
to as described in the Exynos user manual.

Signed-off-by: Hatim Ali <hatim.rv at samsung.com>

diff --git a/board/samsung/smdk5250/dmc_init_lpddr2.c b/board/samsung/smdk5250/dmc_init_lpddr2.c
index 7881074..846469e 100644
--- a/board/samsung/smdk5250/dmc_init_lpddr2.c
+++ b/board/samsung/smdk5250/dmc_init_lpddr2.c
@@ -53,7 +53,7 @@ static void reset_phy_ctrl(void)
 {
 	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
 
-	writel(PHY_RESET_VAL, &clk->lpddr3phy_ctrl);
+	writel(LPDDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
 	sdelay(0x10000);
 }
 
@@ -246,9 +246,9 @@ static void config_rdlvl(struct exynos5_dmc *dmc,
 	/*
 	 * Set ctrl_gateadj, ctrl_readadj
 	 * ctrl_gateduradj, rdlvl_pass_adj
-	 * rdlvl_rddataPadj
+	 * rdlvl_rddata_adj
 	 */
-	val = SET_RDLVL_RDDATAPADJ;
+	val = SET_RDLVL_RDDATA_ADJ;
 	writel(val, &phy0_ctrl->phy_con1);
 	writel(val, &phy1_ctrl->phy_con1);
 
diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h
index 1276fd3..cf572ac 100644
--- a/board/samsung/smdk5250/setup.h
+++ b/board/samsung/smdk5250/setup.h
@@ -353,7 +353,8 @@
 /* (Memory Interleaving Size = 1 << IV_SIZE) */
 #define CONFIG_IV_SIZE		0x07
 
-#define PHY_RESET_VAL	(0 << 0)
+#define LPDDR3PHY_CTRL_PHY_RESET	(1 << 0)
+#define LPDDR3PHY_CTRL_PHY_RESET_OFF	(0 << 0)
 
 /*ZQ Configurations */
 #define PHY_CON16_RESET_VAL	0x08000304
@@ -397,9 +398,9 @@
 #define SET_CTRL_DDR_MODE(x, y)	(x = (x & ~(0x3 << 11)) | y << 11)
 
 #define PHY_CON1_RESET_VAL	0x9210100
-#define RDLVL_RDDATAPADJ	0x1
-#define SET_RDLVL_RDDATAPADJ	((PHY_CON1_RESET_VAL & ~(0xFFFF << 0))\
-					| RDLVL_RDDATAPADJ << 0)
+#define RDLVL_RDDATA_ADJ	0x1
+#define SET_RDLVL_RDDATA_ADJ	((PHY_CON1_RESET_VAL & ~(0xFFFF << 0)) \
+					| RDLVL_RDDATA_ADJ << 0)
 
 #define PHY_CON2_RESET_VAL	0x00010004
 #define RDLVL_EN		(1 << 25)
-- 
1.7.2.3