[U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Prabhakar Lad
prabhakar.csengg at gmail.com
Tue Feb 7 06:00:10 CET 2012
Thierry,
On Mon, Feb 6, 2012 at 7:44 PM, Thierry Reding <
thierry.reding at avionic-design.de> wrote:
> * Prabhakar Lad wrote:
> > Thierry,
> >
> > On 2/6/12, Thierry Reding <thierry.reding at avionic-design.de> wrote:
> > > * Prabhakar Lad wrote:
> > >> Fix build error for mx6qarm2 board due to prototype change
> > >> for function board_mmc_getcd().
> > >> mx6qarm2.c:123: error: conflicting types for 'board_mmc_getcd'
> > >> u-boot/include/mmc.h:318: note: previous declaration of
> 'board_mmc_getcd'
> > >> was here
> > >>
> > >> Signed-off-by: Prabhakar Lad <prabhakar.csengg at gmail.com>
> > >> ---
> > >> board/freescale/mx6qarm2/mx6qarm2.c | 10 +++++-----
> > >> 1 files changed, 5 insertions(+), 5 deletions(-)
> > >>
> > >> diff --git a/board/freescale/mx6qarm2/mx6qarm2.c
> > >> b/board/freescale/mx6qarm2/mx6qarm2.c
> > >> index 9894245..2cb37dd 100644
> > >> --- a/board/freescale/mx6qarm2/mx6qarm2.c
> > >> +++ b/board/freescale/mx6qarm2/mx6qarm2.c
> > >> @@ -120,17 +120,17 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
> > >> {USDHC4_BASE_ADDR, 1},
> > >> };
> > >>
> > >> -int board_mmc_getcd(u8 *cd, struct mmc *mmc)
> > >> +int board_mmc_getcd(struct mmc *mmc)
> > >> {
> > >> struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> > >> + int ret = 0;
> > >>
> > >> if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
> > >> gpio_direction_input(171); /*GPIO6_11*/
> > > ^^^^^^^^^^^^
> > > Could you fix up this comment at the same time (put spaces after /* and
> > > before */)?
> > >
> > The patch for this fix already submitted, shall submit independent
> > patch with this fix?
>
> If it hasn't been applied to any of the upstream repositories yet, then you
> can always send an updated version.
>
The patch is already accepted by the maintainer,
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=e669db1c209eed02ca8c837914c161f5daa2d8fd
so ill drop this fix.
WBR,
--Prabhakar Lad
>
> Thierry
>
More information about the U-Boot
mailing list