[U-Boot] [v2 3/4] Armada100: gplugD: Add USB command support

[Ajay Bhargav]

This patch adds support for USB commands and USB storage device for
Marvell gplugD

Signed-off-by: Ajay Bhargav <ajay.bhargav at einfochips.com>
---
Changes for v2:
	- removed unwanted ifdef
	- fat and ext2 command support moved to new patch

 include/configs/gplugd.h |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
index 9813309..061ebe6 100644
--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -72,6 +72,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
+#define CONFIG_CMD_USB
 
 /* Disable DCACHE */
 #define CONFIG_SYS_DCACHE_OFF
@@ -134,4 +135,15 @@
 #define CONFIG_CMD_EDITENV
 #define CONFIG_CMD_SAVEENV
 
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ARMADA100
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif /* CONFIG_CMD_USB */
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_SUPPORT_VFAT
+
 #endif	/* __CONFIG_GPLUGD_H */
-- 
1.7.7.2