[U-Boot] [PATCH v3 1/5] net: fec_mxc: add 1000 Mbps selection

[Troy Kisky]

Define CONFIG_FEC_QUIRK_ENET_MAC and add to
board files mx6qarm2 and mx6qsabrelite.

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
Acked-by: Dirk Behme <dirk.behme at de.bosch.com>
---
 drivers/net/fec_mxc.c           |   21 +++++++++++++++++++--
 drivers/net/fec_mxc.h           |    2 ++
 include/configs/mx6qarm2.h      |    1 +
 include/configs/mx6qsabrelite.h |    1 +
 4 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index ed73353..7c42b87 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -379,13 +379,14 @@ static int fec_set_hwaddr(struct eth_device *dev)
 static int fec_open(struct eth_device *edev)
 {
 	struct fec_priv *fec = (struct fec_priv *)edev->priv;
+	int speed;
 
 	debug("fec_open: fec_open(dev)\n");
 	/* full-duplex, heartbeat disabled */
 	writel(1 << 2, &fec->eth->x_cntrl);
 	fec->rbd_index = 0;
 
-#if defined(CONFIG_MX6Q)
+#ifdef CONFIG_FEC_QUIRK_ENET_MAC
 	/* Enable ENET HW endian SWAP */
 	writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_DBSWAP,
 		&fec->eth->ecntrl);
@@ -428,9 +429,25 @@ static int fec_open(struct eth_device *edev)
 #endif
 
 	miiphy_wait_aneg(edev);
-	miiphy_speed(edev->name, fec->phy_id);
+	speed = miiphy_speed(edev->name, fec->phy_id);
 	miiphy_duplex(edev->name, fec->phy_id);
 
+#ifdef CONFIG_FEC_QUIRK_ENET_MAC
+	{
+		u32 ecr = readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_SPEED;
+		u32 rcr = (readl(&fec->eth->r_cntrl) &
+				~(FEC_RCNTRL_RMII | FEC_RCNTRL_RMII_10T)) |
+				FEC_RCNTRL_RGMII | FEC_RCNTRL_MII_MODE;
+		if (speed == _1000BASET)
+			ecr |= FEC_ECNTRL_SPEED;
+		else if (speed != _100BASET)
+			rcr |= FEC_RCNTRL_RMII_10T;
+		writel(ecr, &fec->eth->ecntrl);
+		writel(rcr, &fec->eth->r_cntrl);
+	}
+#endif
+	debug("%s:Speed=%i\n", __func__, speed);
+
 	/*
 	 * Enable SmartDMA receive task
 	 */
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 9825eab..af33d21 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -198,6 +198,7 @@ struct ethernet_regs {
 #define FEC_RCNTRL_FCE			0x00000020
 #define FEC_RCNTRL_RGMII		0x00000040
 #define FEC_RCNTRL_RMII			0x00000100
+#define FEC_RCNTRL_RMII_10T		0x00000200
 
 #define FEC_TCNTRL_GTS			0x00000001
 #define FEC_TCNTRL_HBC			0x00000002
@@ -207,6 +208,7 @@ struct ethernet_regs {
 
 #define FEC_ECNTRL_RESET		0x00000001	/* reset the FEC */
 #define FEC_ECNTRL_ETHER_EN		0x00000002	/* enable the FEC */
+#define FEC_ECNTRL_SPEED		0x00000020
 #define FEC_ECNTRL_DBSWAP		0x00000100
 
 #define FEC_X_WMRK_STRFWD		0x00000100
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 0962d3c..495a32a 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -61,6 +61,7 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 #define	CONFIG_FEC_MXC
+#define CONFIG_FEC_QUIRK_ENET_MAC
 #define	CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define	CONFIG_FEC_XCV_TYPE		RGMII
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index d650ee3..2e9775a 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -61,6 +61,7 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 #define	CONFIG_FEC_MXC
+#define CONFIG_FEC_QUIRK_ENET_MAC
 #define	CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define	CONFIG_FEC_XCV_TYPE		RGMII
-- 
1.7.5.4