[U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value

[Jason Liu]

2012/2/8 Fabio Estevam <festevam at gmail.com>:
> Use gpio_direction_input prior to gpio_get_value.
>
> Cc: Jason Liu <r64343 at freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Acked-by: Jason Liu <r64343 at freescale.com>

> ---
>  board/freescale/mx53loco/mx53loco.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
> index e6345e7..c2c26f0 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -153,7 +153,9 @@ int board_mmc_getcd(struct mmc *mmc)
>        int ret;
>
>        mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
> +       gpio_direction_input(75);
>        mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
> +       gpio_direction_input(77);
>
>        if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
>                ret = !gpio_get_value(77); /* GPIO3_13 */
> --
> 1.7.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot