[U-Boot] [PATCH 4/5] SMDK5250: DDR3: Add memory initialization code for DDR3.

Hatim Ali hatim.rv at samsung.com
Thu Feb 23 17:27:22 CET 2012


The patch adds memory initialization sequence for DDR3 @667Mhz.

Signed-off-by: Hatim Ali <hatim.rv at samsung.com>

diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
index 3b4aa06..291fcc6 100644
--- a/board/samsung/smdk5250/Makefile
+++ b/board/samsung/smdk5250/Makefile
@@ -28,7 +28,13 @@ SOBJS	:= lowlevel_init.o
 
 COBJS	:= clock_init.o
 COBJS	+= dmc_common.o
+ifdef CONFIG_DDR3
+COBJS	+= dmc_init_ddr3.o
+else
+ifdef CONFIG_LPDDR2
 COBJS	+= dmc_init_lpddr2.o
+endif
+endif
 COBJS	+= tzpc_init.o
 
 ifndef CONFIG_SPL_BUILD
diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
index 305842d..b6d3214 100644
--- a/board/samsung/smdk5250/clock_init.c
+++ b/board/samsung/smdk5250/clock_init.c
@@ -200,3 +200,18 @@ void system_clock_init()
 	 */
 	writel(CLK_SRC_TOP2_VAL, &clk->src_top2);
 }
+
+void mem_clk_setup(void)
+{
+	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+
+	writel(0x0, &clk->src_cdrex);
+	writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
+
+	writel(MPLL_CON1_VAL, &clk->mpll_con1);
+	writel(MPLL_CON0_VAL, &clk->mpll_con0);
+	writel(BPLL_CON1_VAL, &clk->bpll_con1);
+	writel(BPLL_CON0_VAL, &clk->bpll_con0);
+
+	writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex);
+}
diff --git a/board/samsung/smdk5250/dmc_init_ddr3.c b/board/samsung/smdk5250/dmc_init_ddr3.c
new file mode 100644
index 0000000..8aa3e26
--- /dev/null
+++ b/board/samsung/smdk5250/dmc_init_ddr3.c
@@ -0,0 +1,297 @@
+/*
+ * DDR3 mem setup file for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include "setup.h"
+
+/*
+ * APLL		: 1GHz
+ * MCLK_CDREX	: 667Mhz
+ * Memory Type	: DDR3
+ */
+
+static void reset_phy_ctrl(void)
+{
+	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+
+	writel(LPDDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
+	sdelay(10000);	/* approx 200us */
+	writel(LPDDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
+}
+
+/* Sending ZQINIT command */
+static void config_zqinit(struct exynos5_dmc *dmc)
+{
+	unsigned long channel, chip, mask = 0, val;
+
+	for (channel = 0; channel < CONFIG_DMC_CHANNELS; channel++) {
+		SET_CMD_CHANNEL(mask, channel);
+		for (chip = 0; chip < CONFIG_CHIPS_PER_CHANNEL; chip++) {
+			SET_CMD_CHIP(mask, chip);
+			val = DIRECT_CMD_ZQINIT | mask;
+			writel(val, &dmc->directcmd);
+		}
+	}
+}
+
+static void config_ctrl_dll_on(unsigned int state,
+			struct exynos5_phy_control *phy0_ctrl,
+			struct exynos5_phy_control *phy1_ctrl)
+{
+	unsigned int val, tmp;
+
+	val = readl(&phy0_ctrl->phy_con13);
+
+	/* Reading ctrl_lock_value[8:2] */
+	val &= (NR_DELAY_CELL_COARSE_LOCK_MASK <<
+		NR_DELAY_CELL_COARSE_LOCK_OFFSET);
+
+	/* Aligning 'val' to match 'ctrl_force' offset of PHY_CON12 */
+	val >>= CTRL_CLOCK_OFFSET;
+
+	/* Setting the PHY_CON12 register */
+	tmp = PHY_CON12_RESET_VAL;
+	CONFIG_CTRL_DLL_ON(tmp, state);
+
+	/* Writing 'val' in the 'ctrl_force' offset of PHY_CON12 */
+	tmp |= val;
+	writel(tmp, &phy0_ctrl->phy_con12);
+
+	val = readl(&phy1_ctrl->phy_con13);
+
+	/* Reading ctrl_lock_value[8:2] */
+	val &= (NR_DELAY_CELL_COARSE_LOCK_MASK <<
+		NR_DELAY_CELL_COARSE_LOCK_OFFSET);
+
+	/* Aligning 'val' to match 'ctrl_force' offset of PHY_CON12 */
+	val >>= CTRL_CLOCK_OFFSET;
+
+	/* Setting the PHY_CON12 register */
+	tmp = PHY_CON12_RESET_VAL;
+	CONFIG_CTRL_DLL_ON(tmp, state);
+
+	/* Writing 'val' in the 'ctrl_force' offset of PHY_CON12 */
+	tmp |= val;
+	writel(tmp, &phy1_ctrl->phy_con12);
+}
+
+void mem_ctrl_init()
+{
+	struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
+	struct exynos5_dmc *dmc;
+	unsigned int val;
+
+	phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
+	phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
+	dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE;
+
+	reset_phy_ctrl();
+
+	mem_clk_setup();
+
+	/* Setting Operation Mode as DDR3 and enabling byte_rdlvl */
+	val = PHY_CON0_RESET_VAL;
+	SET_CTRL_DDR_MODE(val, DDR_MODE_DDR3);
+	val |= BYTE_RDLVL_EN;
+	writel(val, &phy0_ctrl->phy_con0);
+	writel(val, &phy1_ctrl->phy_con0);
+
+	/* Enable Read Leveling */
+	writel(SET_RDLVL_RDDATA_ADJ, &phy0_ctrl->phy_con1);
+	writel(SET_RDLVL_RDDATA_ADJ, &phy1_ctrl->phy_con1);
+
+	/* DQS, DQ: Signal */
+	val = CTRL_PULLD_DQ | CTRL_PULLD_DQS;
+	writel(val, &phy0_ctrl->phy_con14);
+	writel(val, &phy1_ctrl->phy_con14);
+
+	/* Set Read Latency and Burst Length for PHY0 and PHY1 */
+	writel(PHY_CON42_VAL, &phy0_ctrl->phy_con42);
+	writel(PHY_CON42_VAL, &phy1_ctrl->phy_con42);
+
+	/* ZQ Calibration */
+	config_zq(phy0_ctrl, phy1_ctrl);
+
+	/*
+	 * Set DMC Concontrol
+	 * dfi_init_start = 1
+	 * rd_fetch = 0x3
+	 * empty = 0
+	 */
+	val = DMC_CONCONTROL_RESET_VAL;
+	SET_RD_FETCH(val);
+	val |= DFI_INIT_START;
+	val &= ~EMPTY;
+	writel(val, &dmc->concontrol);
+
+	/*
+	 * Dynamic Clock: Always Running
+	 * Memory Burst length: 8
+	 * Number of chips: 1
+	 * Memory Bus width: 32 bit
+	 * Memory Type: DDR3
+	 * Additional Latancy for PLL: 0 Cycle
+	 */
+	writel(DMC_MEMCONTROL_VAL, &dmc->memcontrol);
+
+	config_memory(dmc);
+
+	/* Precharge Configuration */
+	writel(DMC_PRECHCONFIG_VAL, &dmc->prechconfig);
+
+	/* Power Down mode Configuration */
+	writel(DMC_PWRDNCONFIG_VAL, &dmc->pwrdnconfig);
+
+	/* Periodic Refresh Interval */
+	writel(DMC_TIMINGREF_VAL, &dmc->timingref);
+
+	/*
+	 * TimingRow, TimingData, TimingPower Setting:
+	 * Values as per Memory AC Parameters
+	 */
+	writel(DMC_TIMINGROW_VAL, &dmc->timingrow);
+
+	writel(DMC_TIMINGDATA_VAL, &dmc->timingdata);
+
+	writel(DMC_TIMINGPOWER_VAL, &dmc->timingpower);
+
+	/* Memory Channel Inteleaving Size: 128 Bytes */
+	writel(CONFIG_IV_SIZE, &dmc->ivcontrol);
+
+	/* Set DQS offsets */
+	writel(DDR3_PHY0_DQS, &phy0_ctrl->phy_con4);
+	writel(DDR3_PHY1_DQS, &phy1_ctrl->phy_con4);
+
+	/* Set DQS offsets */
+	writel(DDR3_PHY0_DQ, &phy0_ctrl->phy_con6);
+	writel(DDR3_PHY1_DQ, &phy1_ctrl->phy_con6);
+
+	/* Set Debug offsets */
+	writel(RESET_DEBUG_OFFSET_VAL, &phy0_ctrl->phy_con10);
+	writel(RESET_DEBUG_OFFSET_VAL, &phy1_ctrl->phy_con10);
+
+	config_ctrl_dll_on(RESET, phy0_ctrl, phy1_ctrl);
+
+	sdelay(50);	/* approx 10 PCLK cycle */
+
+	update_reset_dll(dmc);
+
+	config_mrs(dmc);
+	config_zqinit(dmc);
+
+	sdelay(50);	/* approx 10 PCLK cycle */
+
+	/* Reset DLL Locking */
+	val = PHY_CON12_RESET_VAL;
+	CONFIG_CTRL_START(val, RESET);
+	writel(val, &phy0_ctrl->phy_con12);
+	writel(val, &phy1_ctrl->phy_con12);
+
+	/* Reset DLL Locking */
+	val = PHY_CON12_RESET_VAL;
+	CONFIG_CTRL_START(val, SET);
+	writel(val, &phy0_ctrl->phy_con12);
+	writel(val, &phy1_ctrl->phy_con12);
+
+	sdelay(50);	/* approx 10 PCLK cycle */
+
+	/*
+	 * Looping till SEC SDRAM PHY initialization completes
+	 * for both channel-0 and channel-1
+	 */
+	do {
+		val = readl(&dmc->phystatus);
+		val &= (DFI_INIT_COMPLETE_CHO | DFI_INIT_COMPLETE_CH1);
+	} while (val == 0);
+
+	/*
+	 * Set DMC Concontrol
+	 * rd_fetch = 0x3
+	 * empty = 0
+	 * Basically here we are stopping dfi_init_start done above.
+	 */
+	val = DMC_CONCONTROL_RESET_VAL;
+	SET_RD_FETCH(val);
+	val &= ~EMPTY;
+	writel(val, &dmc->concontrol);
+
+	update_reset_dll(dmc);
+
+	writel(SET_RDLVL_RDDATA_ADJ, &phy0_ctrl->phy_con1);
+	writel(SET_RDLVL_RDDATA_ADJ, &phy1_ctrl->phy_con1);
+
+	/* Enable Read Leveling */
+	val = PHY_CON2_RESET_VAL | RDLVL_EN;
+	writel(val, &phy0_ctrl->phy_con2);
+	writel(val, &phy1_ctrl->phy_con2);
+
+	/* Enable data eye training */
+	val = RDLVL_CONFIG_RESET_VAL | CTRL_RDLVL_DATA_EN;
+	writel(val, &dmc->rdlvl_config);
+
+	/*
+	 * Looping till Read level completion happens
+	 * for both channel-0 and channel-1
+	 */
+	do {
+		val = readl(&dmc->phystatus);
+		val &= (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1);
+	} while (val == 0);
+
+	/* Disable data eye training */
+	val = RDLVL_CONFIG_RESET_VAL & ~CTRL_RDLVL_DATA_EN;
+	writel(val, &dmc->rdlvl_config);
+
+	config_ctrl_dll_on(SET, phy0_ctrl, phy1_ctrl);
+
+	update_reset_dll(dmc);
+
+	config_prech(dmc);
+
+	/*
+	 * Dynamic Clock: Always Running
+	 * Memory Burst length: 8
+	 * Number of chips: 1
+	 * Memory Bus width: 32 bit
+	 * Memory Type: DDR3
+	 * Additional Latancy for PLL: 0 Cycle
+	 */
+	writel(DMC_MEMCONTROL_VAL, &dmc->memcontrol);
+
+	/*
+	 * Set DMC Concontrol
+	 *  rd_fetch = 0x3
+	 *  empty = 0
+	 *  Auto refresh counter enable
+	 */
+	val = DMC_CONCONTROL_RESET_VAL;
+	SET_RD_FETCH(val);
+	val &= ~EMPTY;
+	val |= AREF_EN;
+	writel(val, &dmc->concontrol);
+}
diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h
index c061440..6260843 100644
--- a/board/samsung/smdk5250/setup.h
+++ b/board/samsung/smdk5250/setup.h
@@ -1,5 +1,5 @@
 /*
- * Machine Specific Values for SMDK5250 board based on S5PC520
+ * Machine Specific Values for SMDK5250 board based on Exynos5
  *
  * Copyright (C) 2012 Samsung Electronics
  *
@@ -114,8 +114,13 @@
 #define VPLL_CON1_VAL	0x00000000
 #define VPLL_CON2_VAL	0x00000080
 
+#ifdef CONFIG_LPDDR2
 #define BPLL_MDIV	0x215
 #define BPLL_PDIV	0xC
+#elif defined CONFIG_DDR3
+#define BPLL_MDIV	0x185
+#define BPLL_PDIV	0x7
+#endif
 #define BPLL_SDIV	0x1
 
 #define BPLL_CON1_VAL	0x00203800
@@ -155,20 +160,26 @@
 #define MCLK_CDREX_RATIO	0x0
 #define ACLK_C2C_200_RATIO	0x1
 #define C2C_CLK_400_RATIO	0x1
+#ifdef CONFIG_DDR3
+#define PCLK_CDREX_RATIO	0x4
+#else
 #define PCLK_CDREX_RATIO	0x3
+#endif
 #define ACLK_CDREX_RATIO	0x1
-#define CLK_DIV_CDREX_VAL	((MCLK_DPHY_RATIO << 20) \
-				| (MCLK_CDREX_RATIO << 16) \
+#define CLK_DIV_CDREX_VAL	((MCLK_CDREX2_RATIO << 28)   \
+				| (ACLK_EFCON_RATIO << 24)   \
+				| (MCLK_DPHY_RATIO << 20)    \
+				| (MCLK_CDREX_RATIO << 16)   \
 				| (ACLK_C2C_200_RATIO << 12) \
-				| (C2C_CLK_400_RATIO << 8) \
-				| (PCLK_CDREX_RATIO << 4) \
+				| (C2C_CLK_400_RATIO << 8)   \
+				| (PCLK_CDREX_RATIO << 4)    \
 				| (ACLK_CDREX_RATIO))
 
 #define MCLK_EFPHY_RATIO	0x4
 #define CLK_DIV_CDREX2_VAL	MCLK_EFPHY_RATIO
 
 /* CLK_DIV_ACP */
-#define CLK_DIV_ACP_VAL	0x12
+#define CLK_DIV_ACP_VAL		0x12
 
 /* CLK_SRC_TOP0 */
 #define MUX_ACLK_300_GSCL_SEL		0x1
@@ -360,8 +371,13 @@
 /*ZQ Configurations */
 #define PHY_CON16_RESET_VAL	0x08000304
 
+#ifdef CONFIG_LPDDR2
 #define ZQ_MODE_DDS_VAL		(0x5 << 24)
 #define ZQ_MODE_TERM_VAL	(0x5 << 21)
+#elif defined CONFIG_DDR3
+#define ZQ_MODE_DDS_VAL		(0x7 << 24)
+#define ZQ_MODE_TERM_VAL	(0x2 << 21)
+#endif
 #define SET_ZQ_MODE_DDS_VAL(x)	(x = (x & ~(0x7 << 24)) | ZQ_MODE_DDS_VAL)
 #define SET_ZQ_MODE_TERM_VAL(x)	(x = (x & ~(0x7 << 21)) | ZQ_MODE_TERM_VAL)
 
@@ -377,74 +393,218 @@
 #define SET_CMD_CHIP(x, y)	(x = (x & ~(1 << 20)) | y << 20)
 
 /* Diret Command */
-#define	DIRECT_CMD_NOP		0x07000000
+#define DIRECT_CMD_NOP		0x07000000
+#define DIRECT_CMD_PALL		0x01000000
+#define DIRECT_CMD_ZQINIT	0x0A000000
+#ifdef CONFIG_LPDDR2
 #define DIRECT_CMD_MRS1		0x00071C00
 #define DIRECT_CMD_MRS2		0x00010BFC
 #define DIRECT_CMD_MRS3		0x00000708
 #define DIRECT_CMD_MRS4		0x00000818
-#define	DIRECT_CMD_PALL		0x01000000
+#elif defined CONFIG_DDR3
+#define DIRECT_CMD_MRS1		0x00020010
+#define DIRECT_CMD_MRS2		0x00030000
+#define DIRECT_CMD_MRS3		0x00010042
+#define DIRECT_CMD_MRS4		0x00000B50
+#endif
 
-/* DLL Resync */
-#define FP_RSYNC		(1 << 3)
+/* DMC PHY Control0 register */
+#define PHY_CONTROL0_RESET_VAL	0x0
+#define MEM_TERM_EN	(1 << 31)	/* Termination enable for memory */
+#define PHY_TERM_EN	(1 << 30)	/* Termination enable for PHY */
+#define CTRL_SHGATE	(1 << 29)	/* Duration of DQS gating signal */
+#define FP_RSYNC	(1 << 3)	/* Force DLL resyncronization */
 
+/* MDLL control */
+#define PHY_CON12_RESET_VAL		0x10100070
 #define CONFIG_CTRL_DLL_ON(x, y)	(x = (x & ~(1 << 5)) | y << 5)
 #define CONFIG_CTRL_START(x, y)		(x = (x & ~(1 << 6)) | y << 6)
 #define SET_CTRL_FORCE_VAL(x, y)	(x = (x & ~(0x7F << 8)) | y << 8)
 
-/* RDLVL */
-#define PHY_CON0_RESET_VAL	0x17023240
+#define NR_DELAY_CELL_COARSE_LOCK_OFFSET	10
+#define NR_DELAY_CELL_COARSE_LOCK_MASK		0x7F
+#define CTRL_CLOCK_OFFSET			2
+
+/* PHY Control */
+#define PHY_CON0_RESET_VAL	0x17020A40
+#define DDR_MODE_DDR3		0x1
 #define DDR_MODE_LPDDR2		0x2
+#define DDR_MODE_LPDDR3		0x3
 #define BYTE_RDLVL_EN		(1 << 13)
 #define CTRL_ATGATE		(1 << 6)
-#define SET_CTRL_DDR_MODE(x, y)	(x = (x & ~(0x3 << 11)) | y << 11)
+#define SET_CTRL_DDR_MODE(x, y)		(x = (x & ~(0x3 << 11)) | y << 11)
+#define SET_T_RDDATA_MARGIN(x, y)	(x = (x & ~(0x7 << 17))	| y << 17)
 
 #define PHY_CON1_RESET_VAL	0x9210100
+#ifdef CONFIG_DDR3
+#define RDLVL_RDDATA_ADJ	0xFF00
+#elif defined CONFIG_LPDDR2
 #define RDLVL_RDDATA_ADJ	0x1
+#endif
 #define SET_RDLVL_RDDATA_ADJ	((PHY_CON1_RESET_VAL & ~(0xFFFF << 0)) \
 					| RDLVL_RDDATA_ADJ << 0)
 
+#define DDR3_ADDR		0x0208
+
 #define PHY_CON2_RESET_VAL	0x00010004
 #define RDLVL_EN		(1 << 25)
 #define RDDSKEW_CLEAR		(1 << 13)
 
+#define RDLVL_CONFIG_RESET_VAL	0x0
 #define CTRL_RDLVL_DATA_EN	(1 << 1)
 #define LPDDR2_ADDR		0x00000208
 
-#define DMC_MEMCONFIG0_VAL	0x00001323
-#define DMC_MEMCONFIG1_VAL	0x00001323
-#define DMC_MEMBASECONFIG0_VAL	0x00400780
-#define DMC_MEMBASECONFIG1_VAL	0x00800780
-#define DMC_MEMCONTROL_VAL	0x00212500
+/* MEMCONTROL register bit fields */
+#define DMC_MEMCONTROL_CLK_STOP_DISABLE	(0 << 0)
+#define DMC_MEMCONTROL_DPWRDN_DISABLE	(0 << 1)
+#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE	(0 << 2)
+#define DMC_MEMCONTROL_TP_DISABLE	(0 << 4)
+#define DMC_MEMCONTROL_DSREF_DISABLE	(0 << 5)
+#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x)	(x << 6)
+
+#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3	(7 << 8)
+#define DMC_MEMCONTROL_MEM_TYPE_DDR3	(6 << 8)
+#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2	(5 << 8)
+
+#define DMC_MEMCONTROL_MEM_WIDTH_32BIT	(2 << 12)
+
+#define DMC_MEMCONTROL_NUM_CHIP_1	(0 << 16)
+#define DMC_MEMCONTROL_NUM_CHIP_2	(1 << 16)
+
+#define DMC_MEMCONTROL_BL_8		(3 << 20)
+#define DMC_MEMCONTROL_BL_4		(2 << 20)
+
+#define DMC_MEMCONTROL_PZQ_DISABLE	(0 << 24)
+
+#define DMC_MEMCONTROL_MRR_BYTE_7_0	(0 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_15_8	(1 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_23_16	(2 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_31_24	(3 << 25)
+
+/* MEMCONFIG0 register bit fields */
+#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED	(1 << 12)
+#define DMC_MEMCONFIGx_CHIP_COL_10		(3 << 8)
+#define DMC_MEMCONFIGx_CHIP_ROW_14		(2 << 4)
+#define DMC_MEMCONFIGx_CHIP_ROW_15		(3 << 4)
+#define DMC_MEMCONFIGx_CHIP_BANK_8		(3 << 0)
+
+
+#define DMC_MEMBASECONFIGx_CHIP_BASE(x)		(x << 16)
+#define DMC_MEMBASECONFIGx_CHIP_MASK(x)		(x << 0)
+#define DMC_MEMBASECONFIG_VAL(x)	(	\
+	DMC_MEMBASECONFIGx_CHIP_BASE(x) |	\
+	DMC_MEMBASECONFIGx_CHIP_MASK(0x780)	\
+)
+
+#define DMC_MEMBASECONFIG0_VAL	DMC_MEMBASECONFIG_VAL(0x40)
+#define DMC_MEMBASECONFIG1_VAL	DMC_MEMBASECONFIG_VAL(0x80)
+
+#ifdef CONFIG_LPDDR2
+#define DMC_MEMCONTROL_VAL ( \
+	DMC_MEMCONTROL_CLK_STOP_DISABLE | \
+	DMC_MEMCONTROL_DPWRDN_DISABLE | \
+	DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | \
+	DMC_MEMCONTROL_TP_DISABLE | \
+	DMC_MEMCONTROL_DSREF_DISABLE | \
+	DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | \
+	DMC_MEMCONTROL_MEM_TYPE_LPDDR2 | \
+	DMC_MEMCONTROL_MEM_WIDTH_32BIT | \
+	DMC_MEMCONTROL_NUM_CHIP_2 | \
+	DMC_MEMCONTROL_BL_4 | \
+	DMC_MEMCONTROL_PZQ_DISABLE | \
+	DMC_MEMCONTROL_MRR_BYTE_7_0 \
+)
+#define DMC_MEMCONFIG_VAL	( \
+	DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | DMC_MEMCONFIGx_CHIP_COL_10 | \
+	DMC_MEMCONFIGx_CHIP_ROW_14 | DMC_MEMCONFIGx_CHIP_BANK_8)
+#define DMC_MEMCONFIG1_VAL	DMC_MEMCONFIG_VAL
+#define DMC_MEMCONFIG0_VAL	DMC_MEMCONFIG_VAL
+
+#elif defined CONFIG_DDR3
+#define DMC_MEMCONTROL_VAL ( \
+	DMC_MEMCONTROL_CLK_STOP_DISABLE | \
+	DMC_MEMCONTROL_DPWRDN_DISABLE | \
+	DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | \
+	DMC_MEMCONTROL_TP_DISABLE | \
+	DMC_MEMCONTROL_DSREF_DISABLE | \
+	DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | \
+	DMC_MEMCONTROL_MEM_TYPE_DDR3 | \
+	DMC_MEMCONTROL_MEM_WIDTH_32BIT | \
+	DMC_MEMCONTROL_NUM_CHIP_1 | \
+	DMC_MEMCONTROL_BL_8 | \
+	DMC_MEMCONTROL_PZQ_DISABLE | \
+	DMC_MEMCONTROL_MRR_BYTE_7_0 \
+)
+#define DMC_MEMCONFIG_VAL	( \
+	DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | DMC_MEMCONFIGx_CHIP_COL_10 | \
+	DMC_MEMCONFIGx_CHIP_ROW_15 | DMC_MEMCONFIGx_CHIP_BANK_8)
+#define DMC_MEMCONFIG1_VAL	DMC_MEMCONFIG_VAL
+#define DMC_MEMCONFIG0_VAL	DMC_MEMCONFIG_VAL
+#endif
+
 #define DMC_PRECHCONFIG_VAL		0xFF000000
 #define DMC_PWRDNCONFIG_VAL		0xFFFF00FF
+#ifdef CONFIG_LPDDR2
 #define DMC_TIMINGREF_VAL		0x0000005D
 #define DMC_TIMINGROW_VAL		0x2336544C
 #define DMC_TIMINGDATA_VAL		0x24202408
 #define DMC_TIMINGPOWER_VAL		0x38260235
+#elif defined CONFIG_DDR3
+#define DMC_TIMINGREF_VAL		0x000000BB
+#define DMC_TIMINGROW_VAL		0x7645644d
+#define DMC_TIMINGDATA_VAL		0x45414709
+#define DMC_TIMINGPOWER_VAL		0x3a000a3c
+#endif
 
+#ifdef CONFIG_LPDDR2
 #define CTRL_BSTLEN		0x04
 #define CTRL_RDLAT		0x08
+#elif defined CONFIG_DDR3
+#define CTRL_BSTLEN		0x08
+#define CTRL_RDLAT		0x09
+#endif
 #define PHY_CON42_VAL		(CTRL_BSTLEN << 8 | CTRL_RDLAT << 0)
 
 /* DQS, DQ, DEBUG offsets */
-#define	SET_DQS_OFFSET_VAL	0x7F7F7F7F
-#define	SET_DQ_OFFSET_VAL	0x7F7F7F7F
-#define	SET_DEBUG_OFFSET_VAL	0x7F
+#ifdef CONFIG_DDR3
+#define DDR3_PHY0_DQS		0x08080808
+#define DDR3_PHY1_DQS		0x08080808
+#define DDR3_PHY0_DQ		0x08080808
+#define DDR3_PHY1_DQ		0x00080808
+#endif
+
+#define SET_DQS_OFFSET_VAL	0x7F7F7F7F
+#define SET_DQ_OFFSET_VAL	0x7F7F7F7F
+#define SET_DEBUG_OFFSET_VAL	0x7F
 
-#define	RESET_DQS_OFFSET_VAL	0x08080808
-#define	RESET_DQ_OFFSET_VAL	0x08080808
-#define	RESET_DEBUG_OFFSET_VAL	0x8
+#define RESET_DQS_OFFSET_VAL	0x08080808
+#define RESET_DQ_OFFSET_VAL	0x08080808
+#define RESET_DEBUG_OFFSET_VAL	0x8
 
 #define CTRL_PULLD_DQ		(0x0F << 8)
 #define CTRL_PULLD_DQS		(0x0F << 0)
 
+#define DMC_CONCONTROL_RESET_VAL	0x0FFF1100
+#ifdef CONFIG_LPDDR2
+#define RD_FETCH			0x3
+#elif defined CONFIG_DDR3
+#define RD_FETCH			0x2
+#endif
+#define SET_RD_FETCH(x)		(x = (x & ~(0x7 << 12)) | RD_FETCH << 12)
 #define DFI_INIT_START		(1 << 28)
+#define EMPTY			(1 << 8)
+#define AREF_EN			(1 << 5)
+
+#define DFI_INIT_COMPLETE_CHO	(1 << 2)
+#define DFI_INIT_COMPLETE_CH1	(1 << 3)
+
+#define RDLVL_COMPLETE_CHO	(1 << 14)
+#define RDLVL_COMPLETE_CH1	(1 << 15)
 
 #define CLK_STOP_EN	(1 << 0)
 #define DPWRDN_EN	(1 << 1)
 #define DSREF_EN	(1 << 5)
 
-#define AREF_EN			(1 << 5)
 void sdelay(unsigned long);
 void mem_ctrl_init(void);
 void system_clock_init(void);
@@ -454,5 +614,5 @@ void update_reset_dll(struct exynos5_dmc *);
 void config_mrs(struct exynos5_dmc *);
 void config_prech(struct exynos5_dmc *);
 void config_memory(struct exynos5_dmc *);
-
+void mem_clk_setup(void);
 #endif
-- 
1.7.2.3



More information about the U-Boot mailing list