[U-Boot] Unable to run scripts with autoscr command

[Graeme Russ]

Hi Asif,

On 02/27/2012 07:19 PM, Asif Sulikeri wrote:
> Hi Graeme,
> 
> On Mon, Feb 27, 2012 at 12:12 PM, Graeme Russ <graeme.russ at gmail.com
> <mailto:graeme.russ at gmail.com>> wrote:
> 
>     Hi Asif,
> 
>     On 02/27/2012 05:26 PM, Asif Sulikeri wrote:
>     >     >> And the increase of 100kB is massive - are you sure you are
>     >     compiling with
>     >     >> the same set of options defined in the board config file? If
>     you are
>     >     sure,
>     >     >> then it would be interesting to find out what has caused it.
>     >
>     >
>     > I am compiling with the default options, with no additional changes
>     made to
>     > the conf file, the 1.3.4 version used to give me 150kB binary as compared
>     > to the 252kB binary generated by the 2010.06 version.
> 
>     Ah - Looks like some more options have crept into the default configuration
>     - Can you send the two board config files (as inline text, not attachments)
>     so I can compare?

[snip]


> and the contents of: *u-boot-2010.06/include/configs/davinci_dm365evm.h *
> u-boot version: *2010.06*

[snip]

> 
> /* USB Configuration */
> #define CONFIG_USB_DAVINCI
> #define CONFIG_MUSB_HCD

I think this is where most of the code size increase is coming from - Try
to #undef there and all of the following USB stuff will go

> #ifdef CONFIG_USB_DAVINCI
> #define CONFIG_CMD_USB         /* include support for usb      */
> #define CONFIG_CMD_STORAGE     /* include support for usb      */
> #define CONFIG_CMD_FAT         /* include support for FAT/storage*/
> #define CONFIG_DOS_PARTITION   /* include support for FAT/storage*/
> #endif
> 
> #ifdef CONFIG_MUSB_HCD         /* include support for usb host */
> #define CONFIG_CMD_USB         /* include support for usb cmd */
> #define CONFIG_USB_STORAGE     /* MSC class support */
> #define CONFIG_CMD_STORAGE     /* inclue support for usb-storage cmd */
> #define CONFIG_CMD_FAT         /* inclue support for FAT/storage */
> #define CONFIG_DOS_PARTITION   /* inclue support for FAT/storage */
> 
> #ifdef CONFIG_USB_KEYBOARD     /* HID class support */
> #define CONFIG_SYS_USB_EVENT_POLL
> 
> #define CONFIG_PREBOOT "usb start"
> #endif /* CONFIG_USB_KEYBOARD */
> #endif /* CONFIG_MUSB_HCD */
> 
> #ifdef CONFIG_MUSB_UDC
> #define CONFIG_USB_DEVICE              1
> #define CONFIG_USB_TTY                 1
> #define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
> #define CONFIG_USBD_VENDORID           0x0451
> #define CONFIG_USBD_PRODUCTID          0x5678
> #define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
> #define CONFIG_USBD_PRODUCT_NAME       "DM365VM"
> #endif /* CONFIG_MUSB_UDC */
> 

Regards,

Graeme