[U-Boot] PR1-Appliance UART Boot Issue

[Mike Frysinger]

On Wednesday 22 February 2012 01:16:54 Amber and Sarosh wrote:
> In these setps, the u-boot  files that are accesed successfully in both
> UART and SPI boot modes are the ones compiled for BF537 STAMP board on the
> terminal emulator. This uboot is unable to boot a uImage compiled for
> PR1-Appliance. The ones  we compiled for PR1 Appliance dont show up on the
> terminal emulator in both modes, and same is the result for the
> precompiled u-boot for PR1 Appliance. Can anyone please guide us, what to
> do in order to access u-boot of PR1-Appliance and to boot the image? Let
> us know if you require any other details.We shall be very thankful!

what source tree are you compiling exactly ?
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120222/54095197/attachment.pgp>