[U-Boot] [PATCH 2/2] i.MX28: Fix ref_cpu clock setup

[Marek Vasut]

> Hi,
> 
> In addition to my first patch, please consider accepting this patch too.
> It prevents needless switching on and off PLL bypass mode and it
> allow single stepping through the SPL.

Hi,

this is how the imx-bootlets does it though. It's likely that FSL wants the PLL0 
to run from XTAL when doing power configuration?

M
> 
> This patch removes mx28_power_clock2xtal, because all this function
> does is switching to reset-defaults, at a moment only reset defaults are
> already active.
> 
> It removes mx28_power_clock2pll becasue it is incomplete and
> because mx28_mem_init_clock does the same thing a little later on
> and does it corectly.

Maybe clock2pll should be fixed then ?

M

> 
> Signed-off-by: Robert Delien (robert at delien.nl)
> 
> ________________________________________
> From: Marek Vasut [marek.vasut at gmail.com]
> Sent: 26 January 2012 19:32
> To: Fabio Estevam
> Cc: Robert Deliën; u-boot at lists.denx.de
> Subject: Re: mx28 spl power cpu clock configuration
> 
> > Hi Robert,
> > 
> > On 1/25/12, Marek Vasut <marek.vasut at gmail.com> wrote:
> > >> Shouldn't we configure clkctrl_frac0 - or at least disable CPU clock
> > >> gating - before disabling PLL bypass?
> > > 
> > > This seems reasonable. Fabio, can you comment?
> > 
> > Could you please post a patch with your proposed change so that we can
> > test it?
> 
> Hi Fabio,
> 
> I bought a really crappy custom board a few days ago (some china-made crap)
> sporting mx287, but apparently I'm hitting similar issue you do here.
> 
> When I swap power_init and mem_init though, the board boots fine, othervise
> it hangs.
> 
> M