[U-Boot] Unable to run scripts with autoscr command

[Graeme Russ]

Hi,

On Feb 27, 2012 4:57 PM, "Asif Sulikeri" <asifiqbal.rs at gmail.com> wrote:
>
> Hi any updates on this?

Have you looked into any of my other suggestions?

Regards,

Graeme
>
>
> On Sat, Feb 25, 2012 at 6:44 AM, Graeme Russ <graeme.russ at gmail.com>
wrote:
>>
>> Hi Asif,
>>
>> On 02/24/2012 04:43 PM, Asif Sulikeri wrote:
>> > Thanks Graeme,
>> >
>> > replies in-line,
>>
>> Appreciated (after all, that is ML etiquette)
>>
>> >
>> > On Fri, Feb 24, 2012 at 11:01 AM, Graeme Russ <graeme.russ at gmail.com
>> > <mailto:graeme.russ at gmail.com>> wrote:
>> >
>> >     Hi Asif,
>> >
>> >     On Fri, Feb 24, 2012 at 4:25 PM, Asif Sulikeri <
asifiqbal.rs at gmail.com
>> >     <mailto:asifiqbal.rs at gmail.com>> wrote:
>> >     > Hi, any updates on this, this is a blocker for me, and waiting
for your
>> >     > suggestions to resolve this issue.
>> >
>> >     >
>> >     > On Mon, Feb 20, 2012 at 3:45 PM, Asif Sulikeri
>> >     <asifiqbal.rs at gmail.com <mailto:asifiqbal.rs at gmail.com>>wrote:
>> >     >
>> >     >> Detlev Zundel <dzu <at> denx.de <http://denx.de>> writes:
>> >     >>
>> >     >> Appreciate your reply Detlev, please find my replies in-line,
>> >     >>
>> >     >> > what is the "DM365-IPNC-1.0.14" version about?  I cannot see
such a
>> >     >> > version (or tag) in mainline U-Boot.
>> >     >>
>> >     >> I'm sorry for the typo that is supposed to be 1.0.1.
>> >
>> >     >Don't expect much response if you stay with version 1.0.1
>> >
>> >
>> >
>> > I'm sorry for all the confusion, the u-boot version is actually 1.3.4
and
>> > 1.0.1 is added as a suffix for internal use, sorry for that. Am I
still not
>> > liable to get help for this version(1.3.4) of u-boot?
>>
>> Nope - 1.3.4 is 3.5 years old - more than half of the commits in mainline
>> have been applied since then.
>>
>> >     >> > On the other hand, davinci_dm365evm is a supported
configuration in
>> >     >> > mainline, so why not try current code.  This way we would be
in a much
>> >     >> > better position to help you.
>> >     >> >
>> >     >>
>> >     >> I'll consider the suggestion, but since I've spent considerable
time on
>> >     >> this,
>> >     >> want to make sure where actually the problem lies.
>> >
>> >     Have you tried the suggestion of using the current mainline code?
>> >
>> >     If the problem still exists in latest mainline, you stand a fair
>> >     chance that we'll make an effort to help you out :)
>> >
>> >
>> > :) Thats definitely not the way you bail me out ;), jokes apart, I did
try
>> > using u-boot-2010.06 but the u-boot binary generated is bulky 252KB, as
>> > compared the usual 150KB, this leads to another blocker as the UBL(User
>> > Boot Loader) is now unable to load this bulky u-boot into RAM(or may be
>> > some other issue), and gets stuck as below:
>>
>> Well 2010.06 is also very old - the latest release is 2011.12
>>
>> And the increase of 100kB is massive - are you sure you are compiling
with
>> the same set of options defined in the board config file? If you are
sure,
>> then it would be interesting to find out what has caused it. Could you
try
>> some intermediate releases (2008.10 is the next release after 1.3.4)
>>
>> > DM36x initialization passed!
>> > TI UBL Base Version: 1.50
>> > Boot Loader BootMode = NAND
>> > Starting NAND Copy...
>> > Valid magicnum, 0xA1ACED66, found in block 0x00000008.
>> > Boot Mode Task Completed
>> >
>> > IPNC UBL Version: 1.1.0
>> > Platform: DM365
>> >
>> > Jumping to entry point at 0x81080000
>> >
>> >
>> > and there's no response whatsoever after this. what might be the issue
now?
>>
>> This is outside my knowledge - I've Cc'd the davinci_dm365evm (Sandeep
>> Paulraj), maybe he can provide some pointers...
>>
>> Regards,
>>
>> Graeme
>
>