[U-Boot] USB mass storage gadget patch

[victor]

Hi,

>On further research into this, when receiving the SCSI_MODE_SELECT_6
command, in bulk_out_complete(), the bh pointer is 0x1b872e4
>
>====== debug statement from console ======
>0x43425355 0x507bc10 0x18 0x15060000 0x18000010 0x0 0x0 bulk_out_complete
0x1b872e4
>
>Then, in get_next_command(), before calling start_transfer(), the bh
pointer becomes 0x1b87304. 
>
>This changes in bh pointer can cause data not to be processed by the usb
mass storage gadget code. 

Is there any feedback on the buffer management problem in the U-boot usb
mass storage gadget patch? Thanks.

Regards,
Victor


================================================================================================
CONFIDENTIALITY NOTE:
This e-mail and any attachments may contain confidential information and may be protected by legal privilege. If you are not the intended addressee (or authorized to receive for the addressee). be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.
KeyASIC Inc.
================================================================================================