[U-Boot] [PATCH] mx53loco: Fix PMIC name

[Fabio Estevam]

On Wed, Jan 2, 2013 at 4:27 PM, Robert Nelson <robertcnelson at gmail.com> wrote:

> Okay success on another bisect run to find what was causing the Data
> Abort with linaro's gcc toolchain..
> gcc version 4.7.3 20121205 (prerelease) (crosstool-NG
> linaro-1.13.1-4.7-2012.12-20121214 - Linaro GCC 2012.12)
>
> Reverting, Troy's last 4 imximage changes:
>
> ab857f2613be39274d0870768720067ff9d859c0 (imximage: make
> set_imx_hdr_v1/v2 easier to read)
> ad0826dcd81ba6cf4cc93a4ca8337e1bc676c238 (imximage: change parameters
> to set_imx_hdr)
> 243319825fa6e79885d57b6b78e72f3fe10ef69c (imximage: delay setting of image size)
> 348ca8efb79652d2b259fbd0ed6d317a77a8cbb9 (imximage: fix size of image
> to load.) (this was the first bad bisect, the previous 3 are needed
> for a clean revert)
>
> Along with Fabio's "mx53loco: Call PMIC related functions from
> board_late_init()"
>
> The Dialog based mx53loco is no operating correctly with linaro's toolchain...
>
> U-Boot 2013.01-rc2-00176-gbc67175-dirty (Jan 02 2013 - 12:14:51)
>
> Board: MX53 LOCO
> I2C:   ready
> DRAM:  1 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> *** Warning - bad CRC, using default environment
>
> In:    serial
> Out:   serial
> Err:   serial
> CPU:   Freescale i.MX53 family rev2.0 at 1000 MHz
> Reset cause: POR
> Net:   FEC
> Warning: FEC using MAC address from net device
>
> Hit any key to stop autoboot:  0
> mmc0 is current device
> ** Unrecognized filesystem type **
> ** Unrecognized filesystem type **
> Booting from net ...
> BOOTP broadcast 1

Thanks for bisecting, Robert.

Troy/Stefano,

Any suggestions about this? It would be really nice if we could keep
mx53loco functional when using gcc 4.6.2.

Regards,

Fabio Estevam