January 2013 Archives by author
Starting: Wed Jan 2 04:31:36 CET 2013
Ending: Thu Jan 31 23:36:11 CET 2013
Messages: 2466
- [U-Boot] How to add new device driver from Linux driver source
"Chen, Jack C.W. (陳志偉 IES)"
- [U-Boot] can i in u-boot partition a device and format it in fat ?
Altunbas Sabri (DC-IA/EAH2)
- [U-Boot] Function prototype conflicts with standalone apps
Albert ARIBAUD (U-Boot)
- [U-Boot] About fixup_memory_node()
Dennis Lan (dlan)
- [U-Boot] About fixup_memory_node()
Dennis Lan (dlan)
- [U-Boot] Googlers please reply: commiters in U-Boot
Tom Wai-Hong Tam (談偉航)
- [U-Boot] Rx FIFO: more than 64 bytes receive error
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/2] Factorize ARM startup code as mush as possible.
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] [PATCH v5 0/2] Factorize ARM startup code as much as possible.
Albert ARIBAUD
- [U-Boot] [PATCH v5 1/2] arm: move C runtime setup code in crt0.S
Albert ARIBAUD
- [U-Boot] [PATCH v5 2/2] arm: remove useless code in start.S files
Albert ARIBAUD
- [U-Boot] setting the environment address
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v5 0/2] Factorize ARM startup code as much as possible.
Albert ARIBAUD
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PULL] Please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] [PATCH v2 01/10] arm: move flush_dcache_all() to just before disable cache
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
Albert ARIBAUD
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Albert ARIBAUD
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] [PATCH 0/4 V2] SMDK5250: Convert lowlevel_init.S to .c and set PMIC values
Albert ARIBAUD
- [U-Boot] [PULL v2] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Function prototype conflicts with standalone apps
Albert ARIBAUD
- [U-Boot] Function prototype conflicts with standalone apps
Albert ARIBAUD
- [U-Boot] Irq handler code is not working in u-boot
Albert ARIBAUD
- [U-Boot] [PATCH V2 1/1] imximage.cfg: run files through C preprocessor
Albert ARIBAUD
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Albert ARIBAUD
- [U-Boot] U-Boot Graphics Library?
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] [PATCH] Introduce a global bool type
Albert ARIBAUD
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Albert ARIBAUD
- [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND
Albert ARIBAUD
- [U-Boot] [PATCH] Introduce a global bool type
Albert ARIBAUD
- [U-Boot] [PATCH v3] sandbox: fix compiler warning
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
Albert ARIBAUD
- [U-Boot] [PATCH v3] sandbox: fix compiler warning
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
Albert ARIBAUD
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
Albert ARIBAUD
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
Albert ARIBAUD
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
Albert ARIBAUD
- [U-Boot] u-boot build error [from v2013.01 onwards]
Albert ARIBAUD
- [U-Boot] u-boot build error [from v2013.01 onwards]
Albert ARIBAUD
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
Albert ARIBAUD
- [U-Boot] BDI3000 - Unprotect flash sectors
Sinan Akman
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
David Aldrich
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
David Aldrich
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
David Aldrich
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
David Aldrich
- [U-Boot] [PATCH V4 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and
Amar
- [U-Boot] [PATCH V4 1/9] FDT: Add compatible string for DWMMC
Amar
- [U-Boot] [PATCH V4 2/9] EXYNOS5: FDT: Add DWMMC device node data
Amar
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amar
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amar
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Amar
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
Amar
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
Amar
- [U-Boot] [PATCH V4 8/9] SMDK5250: Enable EMMC booting
Amar
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to
Amar
- [U-Boot] [PATCH V5 00/10] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
Amar
- [U-Boot] [PATCH V5 01/10] FDT: Add compatible string for DWMMC
Amar
- [U-Boot] [PATCH V5 02/10] EXYNOS5: FDT: Add DWMMC device node data
Amar
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amar
- [U-Boot] [PATCH V5 04/10] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amar
- [U-Boot] [PATCH V5 05/10] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
Amar
- [U-Boot] [PATCH V5 06/10] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
Amar
- [U-Boot] [PATCH V5 07/10] MMC: APIs to support resize of EMMC boot partition
Amar
- [U-Boot] [PATCH V5 08/10] SMDK5250: Enable EMMC booting
Amar
- [U-Boot] [PATCH V5 09/10] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Amar
- [U-Boot] [PATCH V5 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C
Amar
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
Doug Anderson
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
Doug Anderson
- [U-Boot] [PATCH v2] patman: Allow use outside of u-boot tree
Doug Anderson
- [U-Boot] [PATCH v4] patman: Allow use outside of u-boot tree
Doug Anderson
- [U-Boot] Googlers please reply: commiters in U-Boot
Doug Anderson
- [U-Boot] patman changes?
Doug Anderson
- [U-Boot] NOR NAND Interference question
Andrei
- [U-Boot] NOR NAND Interference question
Andrei
- [U-Boot] [PATCH] PHY: micrel.c: add support for KSZ9031
David Andrey
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
Fleming Andy-AFLEMING
- [U-Boot] Please pull u-boot-mpc85xx.git
Fleming Andy-AFLEMING
- [U-Boot] Possible MMC subsystem bug
Fleming Andy-AFLEMING
- [U-Boot] [PATCH 9/9] dfu: Support larger than memory transfers.
Pantelis Antoniou
- [U-Boot] How to generate the exceptions in U-boot
VISWANADHULA BALAJI
- [U-Boot] Irq handler code is not working in u-boot
VISWANADHULA BALAJI
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Stefano Babic
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Stefano Babic
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Stefano Babic
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
Stefano Babic
- [U-Boot] [PATCH 0/3] Enable eMMC on mx6qsabresd board
Stefano Babic
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Stefano Babic
- [U-Boot] [PATCH] mx35pdk:Use IMX_GPIO_NR macro
Stefano Babic
- [U-Boot] [PATCH v2 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
Stefano Babic
- [U-Boot] [PATCH 1/3] fsl_esdhc: add MMC_MODE_HC host_caps
Stefano Babic
- [U-Boot] [PATCH 3/3] mx6qsabresd: use on-board eMMC to store environment
Stefano Babic
- [U-Boot] [PATCH 2/3] mx6qsabresd: add usdhc2 and usdhc4 support
Stefano Babic
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
Stefano Babic
- [U-Boot] [PATCH v2 2/2] mx53loco: Improve error handling on power_init()
Stefano Babic
- [U-Boot] [PATCH] mx51evk: Remove unneeded comment
Stefano Babic
- [U-Boot] [PATCH v2 1/2] mx53loco: Remove unneeded 'retval' variable
Stefano Babic
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose between fdt use or not
Stefano Babic
- [U-Boot] [PATCH v3] mx6: Add workaround for ARM errata
Stefano Babic
- [U-Boot] [PATCH v3] mx53loco: Add support for SEIKO 4.3'' WVGA panel
Stefano Babic
- [U-Boot] [PATCH] mx6qsabreauto: enable USB host interface
Stefano Babic
- [U-Boot] [PATCH V3 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Stefano Babic
- [U-Boot] [PATCH v6 4/6] mx53loco: Add support to dynamically choose between fdt use or not
Stefano Babic
- [U-Boot] [PATCH v2] mx51evk: Add DVI output support
Stefano Babic
- [U-Boot] [PATCH v3] mx6qsabresd: Fix booting the kernel from SDHC3
Stefano Babic
- [U-Boot] [PATCH v6 1/6] mx6qsabrelite: Use tabs to environment setting
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] README: imximage: mx35 does not boot from internal mode yet
Stefano Babic
- [U-Boot] configure USB Host1 in U-Boot of iMx53
Stefano Babic
- [U-Boot] U-Boot Graphics Library?
Stefano Babic
- [U-Boot] i.MX6 Solo and Dual Lite
Stefano Babic
- [U-Boot] i.MX6 Solo and Dual Lite
Stefano Babic
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
Stefano Babic
- [U-Boot] [PATCH 01/18] mxs: mmc: Drop unused members from struct mxsmmc_priv
Stefano Babic
- [U-Boot] [PATCH] woodburn: Set Write Protection GPIO as input
Stefano Babic
- [U-Boot] [PATCH v2] mx6qsabre_common: Let mmc partition be board specific
Stefano Babic
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
Stefano Babic
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Stefano Babic
- [U-Boot] [PATCH V3 1/1] imximage.cfg: run files through C preprocessor
Stefano Babic
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Stefano Babic
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
Stefano Babic
- [U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23
Stefano Babic
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect implementation
Stefano Babic
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect implementation
Stefano Babic
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect implementation
Stefano Babic
- [U-Boot] [PATCH V2] mxs: Boost the memory power supply
Stefano Babic
- [U-Boot] [PATCH v2] mx6qsabreauto: enable USB host interface
Stefano Babic
- [U-Boot] [PATCH v2] mx6qsabre_common: Let mmc partition be board specific
Stefano Babic
- [U-Boot] [PATCH] tools: imximage: Let .name field be more generic
Stefano Babic
- [U-Boot] [PATCH] common: env_mmc: Use __weak annotation to simplify code
Stefano Babic
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
Stefano Babic
- [U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23
Stefano Babic
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
Stefano Babic
- [U-Boot] [PATCH v6 2/2] mx23evk: Add initial board support
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [PATCH] Use the libfdt.h include as the interface definition
Gerald Van Baren
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
Gerald Van Baren
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
Jerry Van Baren
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
Jerry Van Baren
- [U-Boot] [U-Boot-Users] standalone code
Diego Preciado Barón
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
Dirk Behme
- [U-Boot] [PATCH] mx6qsabreauto: enable USB host interface
Dirk Behme
- [U-Boot] U-Boot Graphics Library?
Dirk Behme
- [U-Boot] [PATCH v2] mx6qsabreauto: enable USB host interface
Dirk Behme
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH v2] patman: Allow use outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH v3] patman: Allow use outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH v4] patman: Allow use outside of u-boot tree
Vadim Bendebury
- [U-Boot] [PATCH v4] patman: Allow use outside of u-boot tree
Vadim Bendebury
- [U-Boot] Googlers please reply: commiters in U-Boot
Vadim Bendebury
- [U-Boot] Pull request for u-boot-marvell.git
Andreas Bießmann
- [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
Andreas Bießmann
- [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
Andreas Bießmann
- [U-Boot] [PATCH] MAKEALL: fix kill_children for BSD hosts
Andreas Bießmann
- [U-Boot] [PATCH] MAKEALL: fix kill_children for BSD hosts
Andreas Bießmann
- [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to lowlevel_init_c.c
Rajeshwari Birje
- [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to lowlevel_init_c.c
Rajeshwari Birje
- [U-Boot] [PATCH 00/16 V2] SMDK5250: Add FDT support
Rajeshwari Birje
- [U-Boot] [PATCH 0/3 V4] EXYNOS5: MAX77686 add FDT support
Rajeshwari Birje
- [U-Boot] [PATCH 0/3 V5] EXYNOS5: MAX77686 add FDT support
Rajeshwari Birje
- [U-Boot] [PATCH 0/4 V2] SMDK5250: Convert lowlevel_init.S to .c and set PMIC values
Rajeshwari Birje
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Rajeshwari Birje
- [U-Boot] [PATCH] EXYNOS5: Add L2 Cache Support.
Rajeshwari Birje
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Rajeshwari Birje
- [U-Boot] please pull u-boot-samsung master
Rajeshwari Birje
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Rajeshwari Birje
- [U-Boot] [PATCH V2] I2C: S3C24X0: Resolve build error for VCMA9
Rajeshwari Birje
- [U-Boot] [PATCH 2/2] SMDK5250: Enable SPI Gigabyte device.
Rajeshwari Birje
- [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095
Rajeshwari Birje
- [U-Boot] [PATCH 7/7] EXYNOS5: Snow: Add a configuration file
Rajeshwari Birje
- [U-Boot] Googlers please reply: commiters in U-Boot
Gabe Black
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Alexey Brodkin
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Alexey Brodkin
- [U-Boot] [PATCH V2] drivers/block/systemace - added missing "else" in "ace_writew"
Alexey Brodkin
- [U-Boot] [PATCH] drivers/block/systemace - fixed data type in "systemace_read" to match prototype in "block_dev_desc_t"
Alexey Brodkin
- [U-Boot] [PATCH] net: nfs: add dynamic wait period
Matthias Brugger
- [U-Boot] [PATCH] kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
Holger Brunck
- [U-Boot] [PATCH 1/3] arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
Holger Brunck
- [U-Boot] [PATCH 2/3] arm/km: use CONFIG_NAND_ECC_BCH
Holger Brunck
- [U-Boot] [PATCH 3/3] arm/km: add support for kmsuv31 board
Holger Brunck
- [U-Boot] [PATCH 00/15] updates for km83xx boards
Holger Brunck
- [U-Boot] [PATCH 01/15] km/common: remove unneeded ifdefs for I2C
Holger Brunck
- [U-Boot] [PATCH 02/15] km/common/ivm: remove obsolete code
Holger Brunck
- [U-Boot] [PATCH 03/15] km/common/ivm: remove CONFIG_SYS_I2C_IVM_BUS related code
Holger Brunck
- [U-Boot] [PATCH 04/15] km82xx, km83xx: move ethernet_present() from common to cpu specific
Holger Brunck
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch support for kmvect1
Holger Brunck
- [U-Boot] [PATCH 06/15] powerpc/83xx: use ppc_6xx as arch variable for kmvect1
Holger Brunck
- [U-Boot] [PATCH 07/15] km/common: introduce $uimage variable
Holger Brunck
- [U-Boot] [PATCH 08/15] km/scripts: replace hardcoded uImage
Holger Brunck
- [U-Boot] [PATCH 09/15] kmeter1_nand: allow usage of NAND_ECC_SOFT_BCH
Holger Brunck
- [U-Boot] [PATCH 10/15] powerpc/83xx: use NAND_ECC_BCH for kmcoge5ne
Holger Brunck
- [U-Boot] [PATCH 11/15] km/common: add eccmode to kernel commandline
Holger Brunck
- [U-Boot] [PATCH 12/15] powerpc/83xx/km: cleanup tuxx1 support
Holger Brunck
- [U-Boot] [PATCH 13/15] powerpc/83xx/km: add support for kmopti2 board
Holger Brunck
- [U-Boot] [PATCH 14/15] poweprc/83xx/km: remove uneeded CONFIG_MISC_INIT_R
Holger Brunck
- [U-Boot] [PATCH 15/15] powerpc/83xx/km: drop uneeded dtt_bus environment var
Holger Brunck
- [U-Boot] [PATCH 00/15] updates for km83xx boards
Holger Brunck
- [U-Boot] [PATCH 04/15] km82xx, km83xx: move ethernet_present() from common to cpu specific
Holger Brunck
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch support for kmvect1
Holger Brunck
- [U-Boot] [PATCH 1/2] powerpc/82xx/km: make handle_mgcoge3un_reset static
Holger Brunck
- [U-Boot] [PATCH 2/2] powerpc/82xx/km: removed unneeded ifdef
Holger Brunck
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch support for kmvect1
Holger Brunck
- [U-Boot] [PATCH v2 01/16] km/common: remove unneeded ifdefs for I2C
Holger Brunck
- [U-Boot] [PATCH v2 02/16] km/common/ivm: remove obsolete code
Holger Brunck
- [U-Boot] [PATCH v2 03/16] km/common/ivm: remove CONFIG_SYS_I2C_IVM_BUS related code
Holger Brunck
- [U-Boot] [PATCH v2 04/16] km82xx, km83xx: move ethernet_present() from common to cpu specific
Holger Brunck
- [U-Boot] [PATCH v2 05/16] km/common/ivm: rework piggy mac adress offset generation
Holger Brunck
- [U-Boot] [PATCH v2 06/16] powerpc/83xx/km: add MV88E6122 switch support for kmvect1
Holger Brunck
- [U-Boot] [PATCH v2 07/16] powerpc/83xx: use ppc_6xx as arch variable for kmvect1
Holger Brunck
- [U-Boot] [PATCH v2 08/16] km/common: introduce $uimage variable
Holger Brunck
- [U-Boot] [PATCH v2 09/16] km/scripts: replace hardcoded uImage
Holger Brunck
- [U-Boot] [PATCH v2 10/16] kmeter1_nand: allow uasge of NAND_ECC_SOFT_BCH
Holger Brunck
- [U-Boot] [PATCH v2 11/16] powerpc/83xx: use NAND_ECC_BCH for kmcoge5ne
Holger Brunck
- [U-Boot] [PATCH v2 12/16] km/common: add eccmode to kernel commandline
Holger Brunck
- [U-Boot] [PATCH v2 13/16] powerpc/83xx/km: cleanup tuxx1 support
Holger Brunck
- [U-Boot] [PATCH v2 14/16] powerpc/83xx/km: add support for kmopti2 board
Holger Brunck
- [U-Boot] [PATCH v2 15/16] powerpc/83xx/km: remove uneeded CONFIG_MISC_INIT_R
Holger Brunck
- [U-Boot] [PATCH v2 16/16] powerpc/83xx/km: drop uneeded dtt_bus environment var
Holger Brunck
- [U-Boot] Selecting from multiple device trees at runtime
Curt Brune
- [U-Boot] Selecting from multiple device trees at runtime
Curt Brune
- [U-Boot] Selecting from multiple device trees at runtime
Curt Brune
- [U-Boot] Selecting from multiple device trees at runtime
Curt Brune
- [U-Boot] how to create patches for mailing
Eric Bénard
- [U-Boot] [PATCH 0/2] Davinci, MAC addr improvements
Kim Bøndergaard
- [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM configurable, CONFIG_MAC_EEPROM_ADDR
Kim Bøndergaard
- [U-Boot] [PATCH 2/2] Davinci: Fix, console output confusing while setting MAC address
Kim Bøndergaard
- [U-Boot] [PATCH 0/2] Davinci: MAC address updates
Kim Bøndergaard
- [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM configurable, CONFIG_MAC_EEPROM_ADDR
Kim Bøndergaard
- [U-Boot] [PATCH 2/2] Davinci: Fix, console output confusing while setting MAC address
Kim Bøndergaard
- [U-Boot] [PATCH 1/1] omap4: use plain text env file instead boot scripts
Javier Martinez Canillas
- [U-Boot] [PATCH 1/2] serial/ns16550: add an option to avoid hanging on broken platforms
Javier Martinez Canillas
- [U-Boot] [PATCH 2/2] OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMT
Javier Martinez Canillas
- [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT value
Javier Martinez Canillas
- [U-Boot] [PATCH v2 1/1] omap4: allow the use of a plain text env file instead boot scripts
Javier Martinez Canillas
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO LED
Javier Martinez Canillas
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO LED
Javier Martinez Canillas
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO LED
Javier Martinez Canillas
- [U-Boot] [PATCH v2 1/1] omap4: allow the use of a plain text env file instead boot scripts
Javier Martinez Canillas
- [U-Boot] [PATCH 1/1] OMAP3: igep00x0: fix a build warning on IGEP boards
Javier Martinez Canillas
- [U-Boot] Please pull u-boot-ti/master
Javier Martinez Canillas
- [U-Boot] Want to study U-Boot code
Javier Martinez Canillas
- [U-Boot] Bricked when trying to attach UBI
Luca Ceresoli
- [U-Boot] [PATCH 09/10] api/api_display: use the getters for console size info
Che-liang Chiou
- [U-Boot] Googlers please reply: commiters in U-Boot
Che-liang Chiou
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Jaehoon Chung
- [U-Boot] [PATCH V3 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Jaehoon Chung
- [U-Boot] [PATCH V3 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Jaehoon Chung
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Jaehoon Chung
- [U-Boot] [PATCH V3 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Jaehoon Chung
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
Jaehoon Chung
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
Jaehoon Chung
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
Jaehoon Chung
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
Jaehoon Chung
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
Jaehoon Chung
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Jaehoon Chung
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Jaehoon Chung
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to
Jaehoon Chung
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Jaehoon Chung
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Jaehoon Chung
- [U-Boot] [PATCH V5 01/10] FDT: Add compatible string for DWMMC
Jaehoon Chung
- [U-Boot] [PATCH V5 02/10] EXYNOS5: FDT: Add DWMMC device node data
Jaehoon Chung
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
Jaehoon Chung
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
Jaehoon Chung
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Jaehoon Chung
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Jaehoon Chung
- [U-Boot] [PATCH] mmc:sdhci:fix: Change default interrupts enabled at SDHCI initialization
Jaehoon Chung
- [U-Boot] [PATCH] mmc: support the correct card version for eMMC
Jaehoon Chung
- [U-Boot] [PATCH] mmc: check the revision for sd3.0
Jaehoon Chung
- [U-Boot] MMC - Error detected in status(0x208100)!
Jaehoon Chung
- [U-Boot] [PATCH] mmc: support the correct card version for eMMC
Jaehoon Chung
- [U-Boot] memory block device?
Stijn Souffriau -X (ssouffri - Sioux Embedded System at Cisco)
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Jason Cooper
- [U-Boot] [PATCH 3/4] common: cmd_bdinfo: Fix compilation warning for microblaze
Rommel Custodio
- [U-Boot] MMC - Error detected in status(0x208100)!
Rommel Custodio
- [U-Boot] [PATCH] mmc: check the revision for sd3.0
Rommel Custodio
- [U-Boot] Virtex 4 with XMD
Rommel Custodio
- [U-Boot] Virtex 4 with XMD
Rommel Custodio
- [U-Boot] [PATCH 1/4] board: xilinx: Remove unused ancient i2c driver
Rommel G Custodio
- [U-Boot] [PATCH 2/4] board: xilinx: Remove common folder
Rommel G Custodio
- [U-Boot] Help : Marvell SDIO/MMC driver for Sheevaplug
Rommel G Custodio
- [U-Boot] [PATCH 1/3] pxa: Add support for board specific reset function
Lukasz Dalek
- [U-Boot] [PATCH 2/3] h2200: Add board reset support
Lukasz Dalek
- [U-Boot] [PATCH 3/3] pxa: Save lr register in relocate_code function
Lukasz Dalek
- [U-Boot] [PATCH v2] h2200: Add board reset support
Lukasz Dalek
- [U-Boot] [PATCH] pxa: Add weak attribute to reset_cpu() function
Lukasz Dalek
- [U-Boot] Want to study U-Boot code
Robert P. J. Day
- [U-Boot] [PATCH] cmd_usb.c: Make usb help info consistent for "start".
Robert P. J. Day
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
Robert P. J. Day
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
Robert P. J. Day
- [U-Boot] [PATCH] cmd_usb.c: Make usb help info consistent for "start".
Robert P. J. Day
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
Robert P. J. Day
- [U-Boot] [PATCH] fw_env.config: Correct "fw_saveenv" to "fw_setenv".
Robert P. J. Day
- [U-Boot] anyone implemented a failsafe upgrade involving two kernel/rootfs pairs?
Robert P. J. Day
- [U-Boot] anyone implemented a failsafe upgrade involving two kernel/rootfs pairs?
Robert P. J. Day
- [U-Boot] [PATCH 2/3] h2200: Add board reset support
Łukasz Dałek
- [PATCH] VIDEO: better document the correct use of CONFIG_FB_ADDR
Wolfgang Denk
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Wolfgang Denk
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Wolfgang Denk
- [U-Boot] [PATCH v2] VIDEO: better document the correct use of CONFIG_FB_ADDR
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Wolfgang Denk
- [U-Boot] MPC8555 pci issue
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Wolfgang Denk
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Wolfgang Denk
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
Wolfgang Denk
- [U-Boot] [PATCH][RFC] MTD resync from Linux-3.8-rc2+ (master)
Wolfgang Denk
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
Wolfgang Denk
- [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support EMMC booting
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Wolfgang Denk
- [U-Boot] [PATCH 6/7] getenv_f() env variable exist w/o needing a buffer
Wolfgang Denk
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
Wolfgang Denk
- [U-Boot] [PATCH 6/7] getenv_f() env variable exist w/o needing a buffer
Wolfgang Denk
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Wolfgang Denk
- [U-Boot] global variables from comon/lcd.c
Wolfgang Denk
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
Wolfgang Denk
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
Wolfgang Denk
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Wolfgang Denk
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Wolfgang Denk
- [U-Boot] Selecting from multiple device trees at runtime
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
Wolfgang Denk
- [U-Boot] [Patch v2] Introduce a global bool type
Wolfgang Denk
- [U-Boot] [PATCH 1/7] powerpc/mpc8xxx: Enable entering DDR debugging by key press
Wolfgang Denk
- [U-Boot] uboot and Ethernet Controller issue
Wolfgang Denk
- [U-Boot] [PATCH 1/2] net: Remove call of srand from eth_random_enetaddr()
Wolfgang Denk
- [U-Boot] [PATCH 2/2] calimain: Generate random MAC address for factory tests
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
Wolfgang Denk
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
Wolfgang Denk
- [U-Boot] [PATCH 1/2] net: Remove call of srand from eth_random_enetaddr()
Wolfgang Denk
- [U-Boot] [PATCH 2/2] calimain: Generate random MAC address for factory tests
Wolfgang Denk
- [U-Boot] uboot and Ethernet Controller issue
Wolfgang Denk
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Wolfgang Denk
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
Wolfgang Denk
- [U-Boot] [U-Boot Web-Documentation misses command nand]
Wolfgang Denk
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Wolfgang Denk
- [U-Boot] [PATCH] Remove duplication of CONFIG_BOOTCOUNT_LIMIT
Wolfgang Denk
- [U-Boot] [U-Boot-Users] standalone code
Wolfgang Denk
- [U-Boot] U-Boot Graphics Library?
Wolfgang Denk
- [U-Boot] [STATUS] v2013.01 released
Wolfgang Denk
- [U-Boot] [STATUS] v2013.01 released
Wolfgang Denk
- [U-Boot] U-Boot Graphics Library?
Wolfgang Denk
- [U-Boot] U-Boot Graphics Library?
Wolfgang Denk
- [U-Boot] U-Boot Graphics Library?
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Wolfgang Denk
- [U-Boot] Booting different kernel from U-Boot based on time stamp
Wolfgang Denk
- [U-Boot] [RFC 06/10] MIPS: qemu-malta: add PCI support
Wolfgang Denk
- [U-Boot] Booting different kernel from U-Boot based on time stamp
Wolfgang Denk
- [U-Boot] Booting different kernel from U-Boot based on time stamp
Wolfgang Denk
- [U-Boot] [PATCH 1/1] console: USB: KBD: Fix incorrect autoboot timeout
Wolfgang Denk
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI option
Wolfgang Denk
- [U-Boot] [PATCH 1/1 v2] console: USB: KBD: Fix incorrect autoboot timeout
Wolfgang Denk
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Wolfgang Denk
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Wolfgang Denk
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
Wolfgang Denk
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
Wolfgang Denk
- [U-Boot] [Patch v3] Consolidate bool type
Wolfgang Denk
- [U-Boot] [RFC] powerpc/lib: unsafe register handling in wait_ticks
Wolfgang Denk
- [U-Boot] [RFC Patch v5] Consolidate bool type
Wolfgang Denk
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
Wolfgang Denk
- [U-Boot] [PATCH 1/1] console: Improve TFTP booting performance
Wolfgang Denk
- [U-Boot] [PATCH 1/1] console: Improve TFTP booting performance
Wolfgang Denk
- [U-Boot] access u-boot environment variables from kernel space
Wolfgang Denk
- [U-Boot] [PATCH v5 2/2] board: add support for amcore board
Wolfgang Denk
- [U-Boot] Want to study U-Boot code
Wolfgang Denk
- [U-Boot] Can I read env from RAM in uboot script?
Wolfgang Denk
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect autoboot timeout
Wolfgang Denk
- [U-Boot] Want to study U-Boot code
Wolfgang Denk
- [U-Boot] u-boot build error [from v2013.01 onwards]
Wolfgang Denk
- [U-Boot] u-boot build error [from v2013.01 onwards]
Wolfgang Denk
- [U-Boot] u-boot build error [from v2013.01 onwards]
Wolfgang Denk
- [U-Boot] Can I read env from RAM in uboot script?
Wolfgang Denk
- [U-Boot] CONFIG_SYS_TEXT_BASE and relocaddr
Wolfgang Denk
- [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access when displaying splash screen
Wolfgang Denk
- [U-Boot] [PATCH V1 4/7] lcd: add option for board specific splash screen preparation
Wolfgang Denk
- [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd parameters
Wolfgang Denk
- [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash image from NAND
Wolfgang Denk
- [U-Boot] [PATCH V2 2/7] omap3: allow dynamic selection of gfx_format
Wolfgang Denk
- [U-Boot] [PATCH V1 1/7] omap3: add useful dss defines
Wolfgang Denk
- [U-Boot] [PATCH V2 5/7] cm-t35: add support for dvi displays
Wolfgang Denk
- [U-Boot] can i in u-boot partition a device and format it in fat ?
Wolfgang Denk
- [U-Boot] memory block device?
Wolfgang Denk
- [U-Boot] [PATCH] env: Allow accessing non-mtd devices
Wolfgang Denk
- [U-Boot] [U-boot] mkimage -F parameter
Wolfgang Denk
- [U-Boot] anyone implemented a failsafe upgrade involving two kernel/rootfs pairs?
Wolfgang Denk
- [U-Boot] [PATCH] env: Allow accessing non-mtd devices
Wolfgang Denk
- [U-Boot] anyone implemented a failsafe upgrade involving two kernel/rootfs pairs?
Wolfgang Denk
- [U-Boot] call env print from uboot environment
Wolfgang Denk
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Laxman Dewangan
- [U-Boot] [PATCH 0/2] make u-boot/drivers/net/designware cache supportive
Frank Dols
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
Frank Dols
- [U-Boot] [PATCH 2/2] u-boot/drivers/net/designware with cache support.
Frank Dols
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
Frank Dols
- [U-Boot] [PATCH] powerpc/mpc85xx: add setting of clock-frequency for mpic node
Wang Dongsheng
- [U-Boot] Help : Marvell SDIO/MMC driver for Sheevaplug
DrEagle
- [U-Boot] patches status
Angelo Dureghello
- [U-Boot] Flash Not Erased Problem with M29W128GL
Angelo Dureghello
- [U-Boot] Flash Not Erased Problem with M29W128GL
Angelo Dureghello
- [U-Boot] Flash Not Erased Problem with M29W128GL
Angelo Dureghello
- [U-Boot] [PATCH v4 1/2] m68k: add support for mcf5307 cpu
Angelo Dureghello
- [U-Boot] [PATCH v4 2/2] amcore: add support for amcore board
Angelo Dureghello
- [U-Boot] Flash Not Erased Problem with M29W128GL
Angelo Dureghello
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
Angelo Dureghello
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
Angelo Dureghello
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
Angelo Dureghello
- [U-Boot] [PATCH v5 2/2] board: add support for amcore board
Angelo Dureghello
- [U-Boot] [PATCH v5 2/2] board: add support for amcore board
Angelo Dureghello
- [U-Boot] [PATCH v6 2/2] board: add support for amcore board
Angelo Dureghello
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
Andrew Dyer
- [U-Boot] [PATCH 1/2] sf: stmicro: Add support for N25Q64
Andrew Dyer
- [U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
Andrew Dyer
- [U-Boot] [PATCH] m68k: fix debug call befor serial init
Jens Scharsig (BuS Elektronik)
- [U-Boot] CONFIG_SYS_TEXT_BASE and relocaddr
Luca Ellero
- [U-Boot] CONFIG_SYS_TEXT_BASE and relocaddr
Luca Ellero
- [U-Boot] [PATCH] arm: fix bug on relocation address
Luca Ellero
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Fabio Estevam
- [U-Boot] [PATCH] tools: imximage: Let .name field be more generic
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Fabio Estevam
- [U-Boot] [PATCH v2] mx53loco: Add support for SEIKO 4.3'' WVGA panel
Fabio Estevam
- [U-Boot] [PATCH] tools: imximage: Load a size that is multiple of 512
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Fabio Estevam
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Fabio Estevam
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
Fabio Estevam
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
Fabio Estevam
- [U-Boot] [PATCH] mx6: Add workaround for ARM errata
Fabio Estevam
- [U-Boot] [PATCH v2] mx6: Add workaround for ARM errata
Fabio Estevam
- [U-Boot] [PATCH v3] mx6: Add workaround for ARM errata
Fabio Estevam
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Fabio Estevam
- [U-Boot] [PATCH v3 3/6] mx28evk: Add support to dynamically choose between ftd use or not
Fabio Estevam
- [U-Boot] [PATCH v3 3/6] mx28evk: Add support to dynamically choose between ftd use or not
Fabio Estevam
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Fabio Estevam
- [U-Boot] [PATCH] mxs: Use __weak annotation to simplify code
Fabio Estevam
- [U-Boot] [PATCH] common: env_mmc: Use __weak annotation to simplify code
Fabio Estevam
- [U-Boot] [PATCH v4 3/6] mx28evk: Add support to dynamically choose between ftd use or not
Fabio Estevam
- [U-Boot] [PATCH] mx51evk: Let Add DVI output support
Fabio Estevam
- [U-Boot] [PATCH v2] mx51evk: Add DVI output support
Fabio Estevam
- [U-Boot] [PATCH v3] mx53loco: Add support for SEIKO 4.3'' WVGA panel
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabresd: Fix mmc boot by making USDHC3 be 'dev 0'
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabresd: Fix mmc boot by making USDHC3 be 'dev 0'
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabresd: Fix booting the kernel from SDHC3
Fabio Estevam
- [U-Boot] [PATCH v2] mx6qsabresd: Fix booting the kernel from SDHC3
Fabio Estevam
- [U-Boot] [PATCH v2] mx6qsabresd: Fix booting the kernel from SDHC3
Fabio Estevam
- [U-Boot] [PATCH v3] mx6qsabresd: Fix booting the kernel from SDHC3
Fabio Estevam
- [U-Boot] [PATCH v6 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabreauto: enable USB host interface
Fabio Estevam
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabre_common: Let mmc partition be board specific
Fabio Estevam
- [U-Boot] [PATCH v2] mx6qsabre_common: Let mmc partition be board specific
Fabio Estevam
- [U-Boot] [PATCH] README: imximage: mx35 does not boot from internal mode yet
Fabio Estevam
- [U-Boot] [PATCH] README: imximage: mx35 does not boot from internal mode yet
Fabio Estevam
- [U-Boot] [PATCH] README: imximage: mx35 does not boot from internal mode yet
Fabio Estevam
- [U-Boot] configure USB Host1 in U-Boot of iMx53
Fabio Estevam
- [U-Boot] Flash Not Erased for M29W128GL
Fabio Estevam
- [U-Boot] [PATCH] woodburn: Set Write Protection GPIO as input
Fabio Estevam
- [U-Boot] [PATCH] mxs: Boost the memory power supply
Fabio Estevam
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
Fabio Estevam
- [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
Fabio Estevam
- [U-Boot] [PATCH v2] mx6qsabre_common: Let mmc partition be board specific
Fabio Estevam
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
Fabio Estevam
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx23evk: Add initial board support
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] mx23evk: Add initial board support
Fabio Estevam
- [U-Boot] [PATCH v3 2/2] mx23evk: Add initial board support
Fabio Estevam
- [U-Boot] [PATCH v3 2/2] mx23evk: Add initial board support
Fabio Estevam
- [U-Boot] [PATCH v6 2/2] mx23evk: Add initial board support
Fabio Estevam
- [U-Boot] [PATCH] configs: mx28evk: Use single-line comments
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status LED
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx23evk: Remove unneeded 'undef's
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx23evk: Turn on caches
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status LED
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx23evk: Turn on caches
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
Fabio Estevam
- [U-Boot] [PATCH v4 3/3] mx23_olinuxino: Add support for status LED
Fabio Estevam
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Fabio Estevam
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Fabio Estevam
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Fabio Estevam
- [U-Boot] [PATCH v2 4/4] mx23_olinuxino: Add ethernet support
Fabio Estevam
- [U-Boot] [PATCH 05/10] mxs: Fix iomux.h to not break build during assembly stage
Fabio Estevam
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host configuration
Gerlando Falauto
- [U-Boot] Current state and existing users of FIT (Flattened Image Tree)?
Joel A Fernandes
- [U-Boot] [PATCH] powerpc/p5040: add serdes2 memory map register define
Andy Fleming
- [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
Andy Fleming
- [U-Boot] [PATCH] board/common: Add support for QIXIS read/write using i2c
Andy Fleming
- [U-Boot] [PATCHv1] powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'.
Andy Fleming
- [U-Boot] [PATCH v2] powerpc/85xx: select -mcpu=8540 to match -Wa, e500
Andy Fleming
- [U-Boot] B4860/B4420 patches and some updates for qixis and T4240QDS
Andy Fleming
- [U-Boot] B4860/B4420 patches and some updates for qixis and T4240QDS
Andy Fleming
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] [PATCH v3] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Holger Freyther
- [U-Boot] [PATCH 1/3] gpio: Build the da8xx_gpio code for the davinci644x device
Holger Hans Peter Freyther
- [U-Boot] [PATCH 2/3] led: The gpio_led.c code expects that LED state is from the enum
Holger Hans Peter Freyther
- [U-Boot] [PATCH 3/3] mac: Fix the condition check for setting the MAC from the EEPROM
Holger Hans Peter Freyther
- [U-Boot] [PATCH] powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'.
Vakul Garg
- [U-Boot] [PATCHv1] powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'.
Vakul Garg
- [U-Boot] [PATCHv2] powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'
Vakul Garg
- [U-Boot] [PATCH v3 1/3] EHCI: Exynos: Add fdt support
Vivek Gautam
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Vivek Gautam
- [U-Boot] [PATCH v3 3/3] EXYNOS5: FDT: Add compatible strings for USB
Vivek Gautam
- [U-Boot] [PATCH v2] SMDK5250: Enable VBus for USB 2.0 controller
Vivek Gautam
- [U-Boot] [PATCH v2] SMDK5250: Enable VBus for USB 2.0 controller
Vivek Gautam
- [U-Boot] [PATCH v3] SMDK5250: Enable VBus for USB 2.0 controller
Vivek Gautam
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Vivek Gautam
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Vivek Gautam
- [U-Boot] [PATCH v4 1/3] EHCI: Exynos: Add fdt support
Vivek Gautam
- [U-Boot] [PATCH v4 2/3] EXYNOS5: Add device node for USB.
Vivek Gautam
- [U-Boot] [PATCH v4 3/3] EXYNOS5: FDT: Add compatible strings for USB
Vivek Gautam
- [U-Boot] [PATCH v4] SMDK5250: Enable VBus for USB 2.0 controller
Vivek Gautam
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Vivek Gautam
- [U-Boot] [PATCH] usb: ehci: exynos: Enable non-dt path
Vivek Gautam
- [U-Boot] [PATCH] usb: ehci: exynos: Enable non-dt path
Vivek Gautam
- [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI
Vivek Gautam
- [U-Boot] USB3.0 support snacs 0 storage device
Vivek Gautam
- [U-Boot] [PATCH] Exynos5: Add support for USB download boot mode
Vivek Gautam
- [U-Boot] BDI3000 - Unprotect flash sectors
Waibel Georg
- [U-Boot] BDI3000 - Unprotect flash sectors
Waibel Georg
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
David Gibson
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
David Gibson
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
David Gibson
- [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S
Simon Glass
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Simon Glass
- [U-Boot] [RFC PATCH 0/44] RFC: Verified boot implementation based on FIT
Simon Glass
- [U-Boot] [RFC PATCH 01/44] sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FIT
Simon Glass
- [U-Boot] [RFC PATCH 02/44] bootstage: Don't build for HOSTCC
Simon Glass
- [U-Boot] [RFC PATCH 03/44] mkimage: Move ARRAY_SIZE to header file
Simon Glass
- [U-Boot] [RFC PATCH 04/44] libfdt: Add fdt_next_subnode() to permit easy subnode iteration
Simon Glass
- [U-Boot] [RFC PATCH 05/44] image: Move timestamp #ifdefs to header file
Simon Glass
- [U-Boot] [RFC PATCH 06/44] image: Export fit_check_ramdisk()
Simon Glass
- [U-Boot] [RFC PATCH 07/44] image: Split FIT code into new image-fit.c
Simon Glass
- [U-Boot] [RFC PATCH 08/44] image: Move HOSTCC image code to tools/
Simon Glass
- [U-Boot] [RFC PATCH 09/44] image: Split hash node processing into its own function
Simon Glass
- [U-Boot] [RFC PATCH 10/44] image: Convert fit_image_hash_set_value() to static, and rename
Simon Glass
- [U-Boot] [RFC PATCH 11/44] image: Rename fit_image_check_hashes() to fit_image_verify()
Simon Glass
- [U-Boot] [RFC PATCH 12/44] image: Move hash checking into its own functions
Simon Glass
- [U-Boot] [RFC PATCH 13/44] image: Move error! string to common place
Simon Glass
- [U-Boot] [RFC PATCH 14/44] image: Export fit_conf_get_prop_node()
Simon Glass
- [U-Boot] [RFC PATCH 15/44] image: Rename fit_add_hashes() to fit_add_verification_data()
Simon Glass
- [U-Boot] [RFC PATCH 16/44] image: Rename hash printing to fit_image_print_verification_data()
Simon Glass
- [U-Boot] [RFC PATCH 17/44] sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host file
Simon Glass
- [U-Boot] [RFC PATCH 18/44] fdt: Add a parameter to fdt_valid()
Simon Glass
- [U-Boot] [RFC PATCH 19/44] Add getenv_hex() to return an environment variable as hex
Simon Glass
- [U-Boot] [RFC PATCH 20/44] fdt: Allow fdt command to check and update control FDT
Simon Glass
- [U-Boot] [RFC PATCH 21/44] sandbox: fdt: Support fdt command for sandbox
Simon Glass
- [U-Boot] [RFC PATCH 22/44] env: Fix minor comment typos in cmd_nvedit
Simon Glass
- [U-Boot] [RFC PATCH 23/44] fdt: Skip checking FDT if the pointer is NULL
Simon Glass
- [U-Boot] [RFC PATCH 24/44] Revert "fdt- Tell the FDT library where the device tree is"
Simon Glass
- [U-Boot] [RFC PATCH 25/44] Add stdarg to vsprintf.h
Simon Glass
- [U-Boot] [RFC PATCH 26/44] Add minor updates to README.fdt-control
Simon Glass
- [U-Boot] [RFC PATCH 27/44] hash: Add a way to calculate a hash for any algortihm
Simon Glass
- [U-Boot] [RFC PATCH 28/44] sandbox: config: Enable FIT signatures with RSA
Simon Glass
- [U-Boot] [RFC PATCH 29/44] sandbox: Provide a way to map from host RAM to U-Boot RAM
Simon Glass
- [U-Boot] [RFC PATCH 30/44] sandbox: image: Add support for booting images in sandbox
Simon Glass
- [U-Boot] [RFC PATCH 31/44] image: Add signing infrastructure
Simon Glass
- [U-Boot] [RFC PATCH 32/44] image: Support signing of images
Simon Glass
- [U-Boot] [RFC PATCH 33/44] image: Verify signatures in FIT images
Simon Glass
- [U-Boot] [RFC PATCH 34/44] image: Add RSA support for image signing
Simon Glass
- [U-Boot] [RFC PATCH 35/44] mkimage: Put FIT loading in function and tidy error handling
Simon Glass
- [U-Boot] [RFC PATCH 36/44] mkimage: Add -k option to specify key directory
Simon Glass
- [U-Boot] [RFC PATCH 37/44] mkimage: Add -K to write public keys to an FDT blob
Simon Glass
- [U-Boot] [RFC PATCH 38/44] mkimage: Add -F option to modify an existing .fit file
Simon Glass
- [U-Boot] [RFC PATCH 39/44] mkimage: Add -c option to specify a comment for key signing
Simon Glass
- [U-Boot] [RFC PATCH 40/44] mkimage: Add -r option to specify keys that must be verified
Simon Glass
- [U-Boot] [RFC PATCH 41/44] libfdt: Add fdt_find_regions()
Simon Glass
- [U-Boot] [RFC PATCH 42/44] image: Add support for signing of FIT configurations
Simon Glass
- [U-Boot] [RFC PATCH 43/44] Add verified boot information and test
Simon Glass
- [U-Boot] [RFC PATCH 44/44] WIP: sandbox: config: Add test config for verified boot
Simon Glass
- [U-Boot] [PATCH] nds32: Add a basic errno.h
Simon Glass
- [U-Boot] [PATCH v3 8/8] buildman - U-Boot multi-threaded builder and summary tool
Simon Glass
- [U-Boot] [RFC PATCH 33/44] image: Verify signatures in FIT images
Simon Glass
- [U-Boot] [RFC PATCH 32/44] image: Support signing of images
Simon Glass
- [U-Boot] [RFC PATCH 35/44] mkimage: Put FIT loading in function and tidy error handling
Simon Glass
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Simon Glass
- [U-Boot] [PATCH] nds32: Add a basic errno.h
Simon Glass
- [U-Boot] [PATCH] nds32: Add a basic errno.h
Simon Glass
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Simon Glass
- [U-Boot] [PATCH 1/2] video:cache:fix: Proper buffer alignment for lcd subsystem
Simon Glass
- [U-Boot] [PATCH 2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem
Simon Glass
- [U-Boot] Selecting from multiple device trees at runtime
Simon Glass
- [U-Boot] [PATCH 1/2] video:cache:fix: Proper buffer alignment for lcd subsystem
Simon Glass
- [U-Boot] Selecting from multiple device trees at runtime
Simon Glass
- [U-Boot] Selecting from multiple device trees at runtime
Simon Glass
- [U-Boot] Pull request: u-boot-arm/master
Simon Glass
- [U-Boot] Pull request: u-boot-arm/master
Simon Glass
- [U-Boot] Secure update of uboot devices?
Simon Glass
- [U-Boot] Selecting from multiple device trees at runtime
Simon Glass
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
Simon Glass
- [U-Boot] [RFC PATCH 0/22] RFC: image: Reduce code duplication and refactor
Simon Glass
- [U-Boot] [RFC PATCH 01/22] sandbox: Allow -c argument to provide a command list
Simon Glass
- [U-Boot] [RFC PATCH 02/22] sandbox: Support 'source' command
Simon Glass
- [U-Boot] [RFC PATCH 03/22] fs: Add support for saving data to filesystems
Simon Glass
- [U-Boot] [RFC PATCH 04/22] sandbox: fs: Add support for saving files to host filesystem
Simon Glass
- [U-Boot] [RFC PATCH 05/22] image: Split libfdt code into image-fdt.c
Simon Glass
- [U-Boot] [RFC PATCH 06/22] image: Add device tree setup to image library
Simon Glass
- [U-Boot] [RFC PATCH 07/22] arm: Refactor bootm to reduce #ifdefs
Simon Glass
- [U-Boot] [RFC PATCH 08/22] arm: Use image_setup_linux() instead of local code
Simon Glass
- [U-Boot] [RFC PATCH 09/22] powerpc: Use image_setup_linux() instead of local code
Simon Glass
- [U-Boot] [RFC PATCH 10/22] m68k: Use image_setup_linux() instead of local code
Simon Glass
- [U-Boot] [RFC PATCH 11/22] sparc: Use image_setup_linux() instead of local code
Simon Glass
- [U-Boot] [RFC PATCH 12/22] bootstage: Introduce sub-IDs for use with image loading
Simon Glass
- [U-Boot] [RFC PATCH 13/22] mkimage: Add map_sysmem() and IH_ARCH_DEFAULT to simplfy building
Simon Glass
- [U-Boot] [RFC PATCH 14/22] image: Introduce fit_image_load() to load images from FITs
Simon Glass
- [U-Boot] [RFC PATCH 15/22] image: Use fit_image_load() to load ramdisk
Simon Glass
- [U-Boot] [RFC PATCH 16/22] image: Use fit_image_load() to load FDT
Simon Glass
- [U-Boot] [RFC PATCH 17/22] sandbox: Adjust bootm command to work with sandbox
Simon Glass
- [U-Boot] [RFC PATCH 18/22] image: Use fit_image_load() to load kernel
Simon Glass
- [U-Boot] [RFC PATCH 19/22] sandbox: image: Adjust FIT image printing to work with sandbox
Simon Glass
- [U-Boot] [RFC PATCH 20/22] bootstage: Remove unused entries related to kernel/ramdisk/fdt load
Simon Glass
- [U-Boot] [RFC PATCH 21/22] sandbox: image: Create a test for loading FIT images
Simon Glass
- [U-Boot] [RFC PATCH 22/22] WIP: sandbox: config: Remove boot command
Simon Glass
- [U-Boot] [PATCH 2/3 V4] EXYNOS5: Add device node for PMIC
Simon Glass
- [U-Boot] [PATCH 3/3 V4] PMIC: MAX77686: Add FDT Support
Simon Glass
- [U-Boot] [PATCH V4 2/9] EXYNOS5: FDT: Add DWMMC device node data
Simon Glass
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Simon Glass
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Simon Glass
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Simon Glass
- [U-Boot] [PATCH V4 8/9] SMDK5250: Enable EMMC booting
Simon Glass
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to
Simon Glass
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
Simon Glass
- [U-Boot] [PATCH 1/2] EXYNOS5: Make all display related code dependent on CONFIG_LCD
Simon Glass
- [U-Boot] [PATCH v4] patman: Allow use outside of u-boot tree
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS5: Enable console multiplexing in u-boot when LCD support is enabled
Simon Glass
- [U-Boot] [PATCH 1/4 V2] EXYNOS: Add functions for power initialisation
Simon Glass
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Simon Glass
- [U-Boot] [PATCH 3/4 V2] SMDK5250: Add PMIC voltage settings
Simon Glass
- [U-Boot] [PATCH v3] SMDK5250: Enable VBus for USB 2.0 controller
Simon Glass
- [U-Boot] [PATCH v3] SMDK5250: Enable VBus for USB 2.0 controller
Simon Glass
- [U-Boot] [PATCH 01/12] cmd_sf: Add wr_inst argument to 'sf write' command
Simon Glass
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions
Simon Glass
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions
Simon Glass
- [U-Boot] [PATCH 05/12] cmd_sf: Define a functions for parsing read and write instructions
Simon Glass
- [U-Boot] [PATCH 12/12] sf: Pass rd_qeb_req variable as 0 for status and config reg reads
Simon Glass
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
Simon Glass
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions
Simon Glass
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to
Simon Glass
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Simon Glass
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Simon Glass
- [U-Boot] [PATCH 4/4 V2] SMDK5250: Modify IRAM stack pointer address
Simon Glass
- [U-Boot] [PATCH 2/3 V5] EXYNOS5: Add device node for PMIC
Simon Glass
- [U-Boot] [PATCH 3/3 V5] PMIC: MAX77686: Add FDT Support
Simon Glass
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Simon Glass
- [U-Boot] [RFC PATCH 03/22] fs: Add support for saving data to filesystems
Simon Glass
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Simon Glass
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to
Simon Glass
- [U-Boot] [PATCH] usb: ehci: exynos: Enable non-dt path
Simon Glass
- [U-Boot] [RFC PATCH 03/22] fs: Add support for saving data to filesystems
Simon Glass
- [U-Boot] [RFC PATCH 07/22] arm: Refactor bootm to reduce #ifdefs
Simon Glass
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
Simon Glass
- [U-Boot] [PATCH v2 01/10] arm: move flush_dcache_all() to just before disable cache
Simon Glass
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
Simon Glass
- [U-Boot] [PATCH v2 1/9] tegra: fdt: sort dts files
Simon Glass
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
Simon Glass
- [U-Boot] [PATCH v2 9/9] tegra: cardhu: config: enable SPI
Simon Glass
- [U-Boot] [PATCH v2 5/9] tegra30: add SBC1 to periph id mapping table
Simon Glass
- [U-Boot] [PATCH v2 7/9] tegra: add addresses of SPI SLINK controllers
Simon Glass
- [U-Boot] [PATCH v2 6/9] tegra30: fdt: add SPI SLINK nodes
Simon Glass
- [U-Boot] [PATCH] fdt: fix dts preprocessor options
Simon Glass
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
Simon Glass
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
Simon Glass
- [U-Boot] Googlers please reply: commiters in U-Boot
Simon Glass
- [U-Boot] [RFC PATCH 0/4] RFC: FIT images and device tree on x86
Simon Glass
- [U-Boot] [RFC PATCH 1/4] x86: Enable LMB and RAMDISK_HIGH by default
Simon Glass
- [U-Boot] [RFC PATCH 2/4] x86: Rewrite bootm.c to make it similar to ARM
Simon Glass
- [U-Boot] [RFC PATCH 3/4] x86: Allow cmdline setup in setup_zimage() to be optional
Simon Glass
- [U-Boot] [RFC PATCH 4/4] x86: Support loading kernel setup from a FIT
Simon Glass
- [U-Boot] U-Boot Graphics Library?
Simon Glass
- [U-Boot] U-Boot Graphics Library?
Simon Glass
- [U-Boot] U-Boot Graphics Library?
Simon Glass
- [U-Boot] U-Boot Graphics Library?
Simon Glass
- [U-Boot] U-Boot Graphics Library?
Simon Glass
- [U-Boot] [PATCH 05/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
Simon Glass
- [U-Boot] U-Boot Graphics Library?
Simon Glass
- [U-Boot] [PATCH v2] tegra: fdt: remove clocks nodes
Simon Glass
- [U-Boot] [PATCH 1/2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS5: Enable SPI Gigabyte device.
Simon Glass
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Simon Glass
- [U-Boot] [PATCH 1/2] EXYNOS5: Add function to setup set ps hold
Simon Glass
- [U-Boot] [PATCH] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Simon Glass
- [U-Boot] [PATCH 1/2] video: exynos_dp: Remove unused variable disp_info
Simon Glass
- [U-Boot] [PATCH 2/2] video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selected
Simon Glass
- [U-Boot] [PATCH 2/2] SMDK5250: Add PMIC voltage settings
Simon Glass
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
Simon Glass
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
Simon Glass
- [U-Boot] [PATCH] Tegra: T20: Remove unused 'SLOW' SoC ID and PLLX table entry
Simon Glass
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Simon Glass
- [U-Boot] [PATCH 2/2] video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selected
Simon Glass
- [U-Boot] [PATCH 1/7] EXYNOS5: Add function to enable XXTI clock source
Simon Glass
- [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095
Simon Glass
- [U-Boot] [PATCH 6/7] EXYNOS5: Add initial DTS file for Snow.
Simon Glass
- [U-Boot] [PATCH 7/7] EXYNOS5: Snow: Add a configuration file
Simon Glass
- [U-Boot] [PATCH 1/7 v5] EXYNOS5: TMU: Add driver for Thermal Management Unit
Simon Glass
- [U-Boot] [PATCH 2/7 v5] EXYNOS5: Implement board_poweroff for Thermal Management Unit
Simon Glass
- [U-Boot] [PATCH 3/7 v5] EXYNOS5: FDT: Add TMU device node values
Simon Glass
- [U-Boot] [PATCH v2 3/7] Tegra114: Add CPU (armv7) files
Simon Glass
- [U-Boot] [PATCH 4/7 v5] EXYNOS5: TMU: Add TMU init and status check
Simon Glass
- [U-Boot] [PATCH 5/7 v5] EXYNOS5: Config: Enable support for Exynos TMU driver
Simon Glass
- [U-Boot] [PATCH 6/7 v5] TMU: Add TMU support in dtt command
Simon Glass
- [U-Boot] [PATCH 7/7 v5] EXYNOS5: Config: Enable dtt command for TMU
Simon Glass
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
Simon Glass
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Simon Glass
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
Simon Glass
- [U-Boot] [PATCH 1/2] tegra: don't hard-code LCD into default TEGRA_DEVICE_SETTINGS
Simon Glass
- [U-Boot] [PATCH 2/2] tegra: rename FUNCMUX_UART2_UARTB
Simon Glass
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
Simon Glass
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
Simon Glass
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
Simon Glass
- [U-Boot] [PATCH] sandbox: fix compiler warning
Simon Glass
- [U-Boot] [PATCH] sandbox: fix compiler warning
Simon Glass
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
Simon Glass
- [U-Boot] [PATCH V5 02/10] EXYNOS5: FDT: Add DWMMC device node data
Simon Glass
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
Simon Glass
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
Simon Glass
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Simon Glass
- [U-Boot] [PATCH] Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.c
Simon Glass
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
Simon Glass
- [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095
Simon Glass
- [U-Boot] [PATCH 6/7] EXYNOS5: Add initial DTS file for Snow.
Simon Glass
- [U-Boot] [PATCH 6/7 v5] TMU: Add TMU support in dtt command
Simon Glass
- [U-Boot] [PATCH 6/9 v6] TMU: Add TMU support in dtt command
Simon Glass
- [U-Boot] [PATCH 7/7] EXYNOS5: Snow: Add a configuration file
Simon Glass
- [U-Boot] [PATCH 2/7 V2] Sound: MAX98095: Add the driver for codec
Simon Glass
- [U-Boot] [PATCH 3/7 V2] Sound: Support for MAX98095 codec in driver
Simon Glass
- [U-Boot] [PATCH 4/7 V2] EXYNOS5: GPIO to enable MAX98095
Simon Glass
- [U-Boot] [PATCH 5/7 V2] EXYNOS5: FDT: Add compatible strings for MAX98095
Simon Glass
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Simon Glass
- [U-Boot] [PATCH] MAKEALL: add support for per architecture toolchains
Simon Glass
- [U-Boot] [PATCH v2 1/7] tegra: usb: set USB_PORTS_MAX to correct value
Simon Glass
- [U-Boot] [PATCH v2 5/7] tegra: usb: various small cleanups
Simon Glass
- [U-Boot] [PATCH v2 6/7] tegra: usb: move implementation into right directory
Simon Glass
- [U-Boot] [PATCH 1/7 V2] EXYNOS5: Add function to enable XXTI clock source
Simon Glass
- [U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
Simon Glass
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Simon Glass
- [U-Boot] [PATCH 8/9 v6] EXYNOS5: TMU: Add hardware tripping
Simon Glass
- [U-Boot] [PATCH 9/9 v6] EXYNOS5: FDT: Add a H/W-trip member to TMU node
Simon Glass
- [U-Boot] [PATCH 1/3 V2] S5P: GPIO: Add generic pin numbering API's
Simon Glass
- [U-Boot] [PATCH 2/3 V2] EXYNOS5: Add gpio pin numbering feature
Simon Glass
- [U-Boot] [PATCH 3/3 V2] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5
Simon Glass
- [U-Boot] [PATCH V5 04/10] EXYNOS5: DWMMC: Added FDT support for DWMMC
Simon Glass
- [U-Boot] [PATCH V5 05/10] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
Simon Glass
- [U-Boot] [PATCH V5 06/10] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
Simon Glass
- [U-Boot] [PATCH V5 07/10] MMC: APIs to support resize of EMMC boot partition
Simon Glass
- [U-Boot] [PATCH V5 08/10] SMDK5250: Enable EMMC booting
Simon Glass
- [U-Boot] [PATCH V5 09/10] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Simon Glass
- [U-Boot] [PATCH V5 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C
Simon Glass
- [U-Boot] [PATCH v2 2/7] tegra: usb: make controller init functions more self contained
Simon Glass
- [U-Boot] [PATCH v2 4/7] tegra: usb: move controller init into start_port
Simon Glass
- [U-Boot] [PATCH v2 7/7] tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
Simon Glass
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Simon Glass
- [U-Boot] [PATCH] Remove unused CONFIG_SYS_I2C_BUS[_SELECT]
Igor Grinberg
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Igor Grinberg
- [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
Igor Grinberg
- [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters
Igor Grinberg
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Igor Grinberg
- [U-Boot] [PATCH 0/7] omap mmc: implement card detect and write protection
Igor Grinberg
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
Barry Grussling
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host configuration
Barry Grussling
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
Barry Grussling
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
Barry Grussling
- [U-Boot] FW: Configuring USB Host1 in U-Boot for I.MX53
Sarvesh Gupta
- [U-Boot] configure USB Host1 in U-Boot of iMx53
Sarvesh Gupta
- [U-Boot] U-Boot Mainline v2013.01
Sarvesh Gupta
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Anatolij Gustschin
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Anatolij Gustschin
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
Anatolij Gustschin
- [U-Boot] e1000 : Correct Rx Threshold Granularity
Anatolij Gustschin
- [U-Boot] [PATCH] lcd: restore ability to display 8 bpp BMPs on 16 bpp LCDs
Anatolij Gustschin
- [U-Boot] [PATCH v2] VIDEO: better document the correct use of CONFIG_FB_ADDR
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-staging
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] mpc8xxx: fix DDR init value to use CONFIG_MEM_INIT_VALUE
Anatolij Gustschin
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
Anatolij Gustschin
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
Anatolij Gustschin
- [U-Boot] Raspberry pi
Anatolij Gustschin
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
Anatolij Gustschin
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
Anatolij Gustschin
- [U-Boot] raspberry pi
Mohamed Haneef
- [U-Boot] how to create patches for mailing
Hebbar, Gururaja
- [U-Boot] how to create patches for mailing
Hebbar, Gururaja
- [U-Boot] Limit on length of U_BOOT_VERSION_STRING for mpc85xx
Steve Heckman
- [U-Boot] Limit on length of U_BOOT_VERSION_STRING for mpc85xx
Steve Heckman
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Dirk Heinrichs
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Dirk Heinrichs
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Dirk Heinrichs
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Dirk Heinrichs
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Stefan Herbrechtsmeier
- [U-Boot] [PATCH 1/2] ARM: bootm: allow skipping fdt memory node fixup
Rob Herring
- [U-Boot] [PATCH 2/2] ARM: highbank: remove DRAM bank setup
Rob Herring
- [U-Boot] [RFC] Is anyone interested IPv6 support for u-boot
Joe Hershberger
- [U-Boot] [RFC] Is anyone interested IPv6 support for u-boot
Joe Hershberger
- [U-Boot] [PATCH v5 07/20] env: Add support for callbacks to environment vars
Joe Hershberger
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Joe Hershberger
- [U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
Joe Hershberger
- [U-Boot] [PATCH v3 00/10] Add Marvell Dove and SolidRun CuBox
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 01/10] ARM: dove: add support for Marvell Dove SoC
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 02/10] GPIO: add gpio driver for Orion SoCs
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 03/10] MMC: sdhci: Add support for dove sdhci
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 04/10] SPI: Add Orion SPI driver
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 05/10] block: mvsata: add dove include
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 06/10] NET: phy: add 88E1310 PHY initialization
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 07/10] NET: mvgbe: add phylib support
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 08/10] NET: mvgbe: add support for Dove
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 09/10] Boards: Add support for SolidRun CuBox
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 10/10] tools: Add support for Dove to kwboot
Sebastian Hesselbarth
- [U-Boot] AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
Hiremath, Vaibhav
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Jeroen Hofstee
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Jeroen Hofstee
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Jeroen Hofstee
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
Jeroen Hofstee
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Jeroen Hofstee
- [U-Boot] global variables from comon/lcd.c
Jeroen Hofstee
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
Jeroen Hofstee
- [U-Boot] [PATCH] board sc3: fix warning about nested comment
Jeroen Hofstee
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Jeroen Hofstee
- [U-Boot] [PATCH 00/10] common.lcd: remove globals and cleanup
Jeroen Hofstee
- [U-Boot] [PATCH 01/10] lcd, amba: remove this frame buffer driver since it is not used
Jeroen Hofstee
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
Jeroen Hofstee
- [U-Boot] [PATCH 03/10] lcd, mpc8xx: move the mpc8xx frame buffer driver to drivers/video
Jeroen Hofstee
- [U-Boot] [PATCH 04/10] lcd, pxafb: move the pxafb to drivers/video
Jeroen Hofstee
- [U-Boot] [PATCH 05/10] common/lcd.c: cleanup use of global variables
Jeroen Hofstee
- [U-Boot] [PATCH 06/10] common/lcd.c: remove global lcd_base
Jeroen Hofstee
- [U-Boot] [PATCH 07/10] common/lcd: cosmetic: clean up a bit
Jeroen Hofstee
- [U-Boot] [PATCH 08/10] lcd, fb: cleanup, remove prototypes already in lcd.h and unused code
Jeroen Hofstee
- [U-Boot] [PATCH 09/10] api/api_display: use the getters for console size info
Jeroen Hofstee
- [U-Boot] [PATCH 10/10] common/lcd.c: move the macro's to the c file
Jeroen Hofstee
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
Jeroen Hofstee
- [U-Boot] [PATCH 0/5] Add splash screen for CM-T35
Jeroen Hofstee
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Jeroen Hofstee
- [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
Jeroen Hofstee
- [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters
Jeroen Hofstee
- [U-Boot] [PATCH 1/5] omap3: add useful dss defines
Jeroen Hofstee
- [U-Boot] [PATCH 1/5] omap3: add useful dss defines
Jeroen Hofstee
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Jeroen Hofstee
- [U-Boot] [PATCH v2 00/10] common.lcd: remove globals and cleanup
Jeroen Hofstee
- [U-Boot] [PATCH v2 01/10] lcd, amba: remove this driver since it is not used
Jeroen Hofstee
- [U-Boot] [PATCH v2 02/10] lcd, tegra: remove unused cursor functions
Jeroen Hofstee
- [U-Boot] [PATCH v2 03/10] lcd, mpc8xx: move the mpc8xx driver to drivers/video
Jeroen Hofstee
- [U-Boot] [PATCH v2 04/10] lcd, pxafb: move the pxafb to drivers/video
Jeroen Hofstee
- [U-Boot] [PATCH v2 05/10] common/lcd.c: cleanup use of global variables
Jeroen Hofstee
- [U-Boot] [PATCH v2 06/10] common/lcd.c: remove global lcd_base
Jeroen Hofstee
- [U-Boot] [PATCH v2 08/10] lcd, fb: remove duplicated prototypes and unused code
Jeroen Hofstee
- [U-Boot] [PATCH v2 09/10] api/api_display: use the getters for console size info
Jeroen Hofstee
- [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
Jeroen Hofstee
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Jeroen Hofstee
- [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters
Jeroen Hofstee
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Jeroen Hofstee
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
Jeroen Hofstee
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Jeroen Hofstee
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
Jeroen Hofstee
- [U-Boot] Can I read env from RAM in uboot script?
Jeroen Hofstee
- [U-Boot] Can I read env from RAM in uboot script?
Jeroen Hofstee
- [U-Boot] [PATCH] arm: fix bug on relocation address
Jeroen Hofstee
- [U-Boot] U-Boot Graphics Library?
Alexander Holler
- [U-Boot] cc-list modified?
Alexander Holler
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
Alexander Holler
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
Alexander Holler
- [U-Boot] cc-list modified?
Alexander Holler
- [U-Boot] U-Boot Graphics Library?
Alexander Holler
- [U-Boot] cc-list modified?
Alexander Holler
- [U-Boot] cc-list modified?
Alexander Holler
- [U-Boot] U-Boot Graphics Library?
Alexander Holler
- [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment setting
Liu Hui-R64343
- [U-Boot] [PATCH v5 5/6] mx6qsabrelite: Add support to dynamically choose between fdt use or not
Liu Hui-R64343
- [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not
Liu Hui-R64343
- [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose between fdt use or not
Liu Hui-R64343
- [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Adjust SDRAM setting
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] arm: rmobile: kzm9g: Adjust ETM trace clock
Nobuhiro Iwamatsu
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Jason
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
Jason
- [U-Boot] [PATCH] Remove unused CONFIG_SYS_I2C_BUS[_SELECT]
Michael Jones
- [PATCH] MIPS: bootm.c: add support for passing device-tree to Linux
Gabor Juhos
- [U-Boot] [PATCH] MIPS: bootm.c: use debug macro to print debug message
Gabor Juhos
- [U-Boot] [PATCH] common/cmd_bootm.c: prevent running of subcommands before 'bootm start'
Gabor Juhos
- [U-Boot] [PATCH 1/3] MIPS: bootm.c: separate linux jump code
Gabor Juhos
- [U-Boot] [PATCH 2/3] MIPS: bootm.c: separate environment initialization
Gabor Juhos
- [U-Boot] [PATCH 3/3] MIPS: bootm.c: add support for 'prep' and 'go' subcommands
Gabor Juhos
- [U-Boot] [PATCH 3/3] MIPS: bootm.c: add support for 'prep' and 'go' subcommands
Gabor Juhos
- [U-Boot] [PATCH 3/3] MIPS: bootm.c: add support for 'prep' and 'go' subcommands
Gabor Juhos
- [U-Boot] Proposal for an interface to pass a DT to the kernel on MIPS
Gabor Juhos
- [U-Boot] Proposal for an interface to pass a DT to the kernel on MIPS
Gabor Juhos
- [U-Boot] [PATCH 1/2] board/qemu-mips: fix a typo in README
Gabor Juhos
- [U-Boot] [PATCH 2/2] board/qemu-mips: add '-M mips' switch to the example usage command
Gabor Juhos
- [U-Boot] [RFC 1/3] MIPS: bootm_qemu_mips.c: separate linux preparation code
Gabor Juhos
- [U-Boot] [RFC 2/3] MIPS: bootm_qemu_mips.c: separate linux jump code
Gabor Juhos
- [U-Boot] [RFC 3/3] MIPS: bootm.c: integrate QEMU specific functions
Gabor Juhos
- [U-Boot] [RFC 3/3] MIPS: bootm.c: integrate QEMU specific functions
Gabor Juhos
- [U-Boot] [RFC 3/3] MIPS: bootm.c: integrate QEMU specific functions
Gabor Juhos
- [U-Boot] [PATCH] MIPS: bootm.c: drop obsolete Qemu specific bootm implementation
Gabor Juhos
- [U-Boot] [PATCH 1/2] MIPS: use inline directive for __in*s functions
Gabor Juhos
- [U-Boot] [PATCH 2/2] MIPS: convert IO port accessor functions to 'static inline'
Gabor Juhos
- [U-Boot] [PATCH] MIPS: start{, 64}.S: fill branch delay slots with NOP instructions
Gabor Juhos
- [U-Boot] [PATCH] MIPS: board.c: fix monitor length calculations
Gabor Juhos
- [U-Boot] [PATCH] MIPS: board.c: fix monitor length calculations
Gabor Juhos
- [U-Boot] [RFC 00/10] MIPS: initial support for emulated Malta board
Gabor Juhos
- [U-Boot] [RFC 01/10] MIPS: qemu-malta: add support for emulated MIPS Malta board
Gabor Juhos
- [U-Boot] [RFC 02/10] MIPS: qemu-malta: add reset support
Gabor Juhos
- [U-Boot] [RFC 03/10] MIPS: qemu-malta: enable flash support
Gabor Juhos
- [U-Boot] [RFC 04/10] MIPS: import gt64120.h header from Linux 3.8-rc3
Gabor Juhos
- [U-Boot] [RFC 05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON
Gabor Juhos
- [U-Boot] [RFC 06/10] MIPS: qemu-malta: add PCI support
Gabor Juhos
- [U-Boot] [RFC 07/10] net: pcnet: use pci_virt_to_mem to obtain buffer addresses
Gabor Juhos
- [U-Boot] [RFC 08/10] MIPS: qemu-malta: bring up ethernet
Gabor Juhos
- [U-Boot] [RFC 09/10] MIPS: bootm.c: add YAMON style Linux preparation/jump code
Gabor Juhos
- [U-Boot] [RFC 10/10] MIPS: start.S: emulate REVISION register for qemu-malta
Gabor Juhos
- [U-Boot] [RFC 06/10] MIPS: qemu-malta: add PCI support
Gabor Juhos
- [U-Boot] [PATCH] MIPS: simplify relocated _G_O_T_ address calculation
Gabor Juhos
- [U-Boot] [PATCH] malloc: make malloc_bin_reloc static
Gabor Juhos
- [U-Boot] [PATCH 00/10] MIPS: initial support for emulated Malta board
Gabor Juhos
- [U-Boot] [PATCH 01/10] MIPS: qemu-malta: add support for emulated MIPS Malta board
Gabor Juhos
- [U-Boot] [PATCH 02/10] MIPS: qemu-malta: add reset support
Gabor Juhos
- [U-Boot] [PATCH 03/10] MIPS: qemu-malta: enable flash support
Gabor Juhos
- [U-Boot] [PATCH 04/10] MIPS: import gt64120.h header from Linux 3.8-rc3
Gabor Juhos
- [U-Boot] [PATCH 05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON
Gabor Juhos
- [U-Boot] [PATCH 06/10] MIPS: qemu-malta: add PCI support
Gabor Juhos
- [U-Boot] [PATCH 07/10] net: pcnet: use pci_virt_to_mem to obtain buffer addresses
Gabor Juhos
- [U-Boot] [PATCH 08/10] MIPS: qemu-malta: bring up ethernet
Gabor Juhos
- [U-Boot] [PATCH 09/10] MIPS: bootm.c: add YAMON style Linux preparation/jump code
Gabor Juhos
- [U-Boot] [PATCH 10/10] MIPS: start.S: emulate REVISION register for qemu-malta
Gabor Juhos
- [U-Boot] [PATCH 0/5] MIPS: start.S: relocate_code fixes and cleanups
Gabor Juhos
- [U-Boot] [PATCH 1/5] MIPS: start.S: fix boundary check in relocate_code
Gabor Juhos
- [U-Boot] [PATCH 2/5] MIPS: start.S: set sp register directly
Gabor Juhos
- [U-Boot] [PATCH 3/5] MIPS: start.S: save reused arguments earlier in relocate_code
Gabor Juhos
- [U-Boot] [PATCH 4/5] MIPS: start.S: simplify relocation offset calculation
Gabor Juhos
- [U-Boot] [PATCH 5/5] MIPS: start.S: don't save flush_cache parameters in advance
Gabor Juhos
- [U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
Gabor Juhos
- [U-Boot] [PATCH 2/7] MIPS: qemu-mips: use the unified u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH 3/7] MIPS: pb1x00: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH 4/7] MIPS: vct: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH 5/7] MIPS: incaip: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH 6/7] MIPS: dbau1x00: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH 7/7] MIPS: qi_lb60: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH 4/7] MIPS: vct: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
Gabor Juhos
- [U-Boot] [PATCH] MIPS: remove OUTPUT_FORMAT from linker scripts
Gabor Juhos
- [U-Boot] [PATCH v2 0/7] MIPS: use an unified u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH v2 0/7] MIPS: use an unified u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH v2 1/7] MIPS: add unified u-boot.lds file
Gabor Juhos
- [U-Boot] [PATCH v2 2/7] MIPS: qemu-mips: use the unified u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH v2 3/7] MIPS: pb1x00: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH v2 4/7] MIPS: vct: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH v2 5/7] MIPS: incaip: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH v2 6/7] MIPS: dbau1x00: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH v2 7/7] MIPS: qi_lb60: remove custom u-boot.lds script
Gabor Juhos
- [U-Boot] [PATCH] MIPS: xburst: simplify relocation offset calculation
Gabor Juhos
- [U-Boot] [PATCH v2] MIPS: simplify relocated _G_O_T_ address calculation
Gabor Juhos
- [U-Boot] [PATCH v2 1/7] MIPS: add unified u-boot.lds file
Gabor Juhos
- [U-Boot] [PATCH] MIPS: start.S: remove obsolete 64 bit handling in setup_c0_status
Gabor Juhos
- [U-Boot] [PATCH] MIPS: start.S: unify and simplify reset vector handling
Gabor Juhos
- [U-Boot] MPC8555 pci issue
Ashok Kumar Kacham
- [U-Boot] MPC8555 pci issue
Ashok Kumar Kacham
- [U-Boot] [PATCH v2] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE
Minkyu Kang
- [U-Boot] [PATCH 2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem
Minkyu Kang
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
Minkyu Kang
- [U-Boot] [PATCH 00/16 V2] SMDK5250: Add FDT support
Minkyu Kang
- [U-Boot] [PATCH V4 3/4] video: Modify exynos_fimd driver to support LCD console
Minkyu Kang
- [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP
Minkyu Kang
- [U-Boot] [PATCH V4 3/4] video: Modify exynos_fimd driver to support LCD console
Minkyu Kang
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Minkyu Kang
- [U-Boot] [PATCH 2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem
Minkyu Kang
- [U-Boot] [PATCH v4 1/3] EHCI: Exynos: Add fdt support
Minkyu Kang
- [U-Boot] [PATCH v4 2/3] EXYNOS5: Add device node for USB.
Minkyu Kang
- [U-Boot] [PATCH v4 3/3] EXYNOS5: FDT: Add compatible strings for USB
Minkyu Kang
- [U-Boot] [PATCH v4] SMDK5250: Enable VBus for USB 2.0 controller
Minkyu Kang
- [U-Boot] [PATCH] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards
Minkyu Kang
- [U-Boot] [PATCH V5 4/4] EXYNOS5: Add support for FIMD and DP
Minkyu Kang
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
Minkyu Kang
- [U-Boot] [PATCH v2] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards
Minkyu Kang
- [U-Boot] [PATCH 0/3 V5] EXYNOS5: MAX77686 add FDT support
Minkyu Kang
- [U-Boot] [PATCH V6 0/4] Add support for FIMD and DP on SMDK5250
Minkyu Kang
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Minkyu Kang
- [U-Boot] [PATCH 1/2] Exynos: clock: support get_mmc_clk for exynos
Minkyu Kang
- [U-Boot] [PATCH 2/2] Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk
Minkyu Kang
- [U-Boot] [PATCH V2 1/2] EXYNOS5: Make all display related code dependent on CONFIG_LCD
Minkyu Kang
- [U-Boot] [PATCH V2 2/2] EXYNOS5: Enable console multiplexing in u-boot
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH] I2C: S3C24X0: Resolve build error for VCMA9
Minkyu Kang
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Minkyu Kang
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Minkyu Kang
- [U-Boot] [PATCH V2] I2C: S3C24X0: Resolve build error for VCMA9
Minkyu Kang
- [U-Boot] [PATCH 0/2] video: Fix compilation warnings for exynos video
Minkyu Kang
- [U-Boot] [PULL v2] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH v6] Marvell MV88E61XX Switch Driver support
Kenny
- [U-Boot] Regarding M29W128GL Support in u-boot
Ramesh K Khokhani
- [U-Boot] Flash Not Erased Problem with M29W128GL
Ramesh K Khokhani
- [U-Boot] Flash Not Erased Problem with M29W128GL
Ramesh K Khokhani
- [U-Boot] Flash Not Erased for M29W128GL
Ramesh K Khokhani
- [U-Boot] Flash Not Erased for M29W128GL
Ramesh K Khokhani
- [U-Boot] FW: Flash Not Erased for M29W128GL
Ramesh K Khokhani
- [U-Boot] Flash Not Erased for M29W128GL
Ramesh K Khokhani
- [U-Boot] Flash Not Erased Problem with M29W128GL
Ramesh K Khokhani
- [U-Boot] Flash Not Erased Problem with M29W128GL
Ramesh K Khokhani
- [U-Boot] Flash Not Erased Problem with M29W128GL
Ramesh K Khokhani
- [U-Boot] Flash Not Erased Problem with M29W128GL
Ramesh K Khokhani
- [U-Boot] [STATUS] v2013.01-rc3 out
Nikita Kiryanov
- [U-Boot] [PATCH 0/5] Add splash screen for CM-T35
Nikita Kiryanov
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Nikita Kiryanov
- [U-Boot] [PATCH 1/5] omap3: add useful dss defines
Nikita Kiryanov
- [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
Nikita Kiryanov
- [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters
Nikita Kiryanov
- [U-Boot] [PATCH 1/5] omap3: add useful dss defines
Nikita Kiryanov
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
Nikita Kiryanov
- [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND
Nikita Kiryanov
- [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND
Nikita Kiryanov
- [U-Boot] [PATCH V2 0/7] Add splash screen for CM-T35
Nikita Kiryanov
- [U-Boot] [PATCH V1 1/7] omap3: add useful dss defines
Nikita Kiryanov
- [U-Boot] [PATCH V2 2/7] omap3: allow dynamic selection of gfx_format
Nikita Kiryanov
- [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access when displaying splash screen
Nikita Kiryanov
- [U-Boot] [PATCH V1 4/7] lcd: add option for board specific splash screen preparation
Nikita Kiryanov
- [U-Boot] [PATCH V2 5/7] cm-t35: add support for dvi displays
Nikita Kiryanov
- [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd parameters
Nikita Kiryanov
- [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash image from NAND
Nikita Kiryanov
- [U-Boot] [PATCH V1 1/7] omap3: add useful dss defines
Nikita Kiryanov
- [U-Boot] [PATCH V2 2/7] omap3: allow dynamic selection of gfx_format
Nikita Kiryanov
- [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access when displaying splash screen
Nikita Kiryanov
- [U-Boot] [PATCH V1 4/7] lcd: add option for board specific splash screen preparation
Nikita Kiryanov
- [U-Boot] [PATCH V2 5/7] cm-t35: add support for dvi displays
Nikita Kiryanov
- [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd parameters
Nikita Kiryanov
- [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash image from NAND
Nikita Kiryanov
- [U-Boot] [PATCH V3 0/7] Add splash screen for CM-T35
Nikita Kiryanov
- [U-Boot] [PATCH V3 1/7] omap3: add useful dss defines
Nikita Kiryanov
- [U-Boot] [PATCH V3 2/7] omap3: allow dynamic selection of gfx_format
Nikita Kiryanov
- [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access when displaying splash screen
Nikita Kiryanov
- [U-Boot] [PATCH V1 4/7] lcd: add option for board specific splash screen preparation
Nikita Kiryanov
- [U-Boot] [PATCH V3 5/7] cm-t35: add support for dvi displays
Nikita Kiryanov
- [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd parameters
Nikita Kiryanov
- [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash image from NAND
Nikita Kiryanov
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Troy Kisky
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Troy Kisky
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
Troy Kisky
- [U-Boot] [PATCH v2] mx6: Add workaround for ARM errata
Troy Kisky
- [U-Boot] [PATCH V3 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Troy Kisky
- [U-Boot] [PATCH V2 1/1] imximage.cfg: run files through C preprocessor
Troy Kisky
- [U-Boot] [PATCH V3 1/1] imximage.cfg: run files through C preprocessor
Troy Kisky
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
Troy Kisky
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
Troy Kisky
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
Troy Kisky
- [U-Boot] [PATCH V5 0/4] Add support for FIMD and DP on SMDK5250
Ajay Kumar
- [U-Boot] [PATCH V3 1/4] EXYNOS5: Change parent clock of FIMD to MPLL
Ajay Kumar
- [U-Boot] [PATCH V3 2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
Ajay Kumar
- [U-Boot] [PATCH V5 3/4] video: Modify exynos_fimd driver to support LCD console
Ajay Kumar
- [U-Boot] [PATCH V5 4/4] EXYNOS5: Add support for FIMD and DP
Ajay Kumar
- [U-Boot] [PATCH V6 0/4] Add support for FIMD and DP on SMDK5250
Ajay Kumar
- [U-Boot] [PATCH V6 1/4] EXYNOS5: Change parent clock of FIMD to MPLL
Ajay Kumar
- [U-Boot] [PATCH V6 2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
Ajay Kumar
- [U-Boot] [PATCH V6 3/4] video: Modify exynos_fimd driver to support LCD console
Ajay Kumar
- [U-Boot] [PATCH 4/4] EXYNOS5: Add support for FIMD and DP
Ajay Kumar
- [U-Boot] [PATCH 1/2] EXYNOS5: Make all display related code dependent on CONFIG_LCD
Ajay Kumar
- [U-Boot] [PATCH 2/2] EXYNOS5: Enable console multiplexing in u-boot when LCD support is enabled
Ajay Kumar
- [U-Boot] [PATCH V2 1/2] EXYNOS5: Make all display related code dependent on CONFIG_LCD
Ajay Kumar
- [U-Boot] [PATCH V2 2/2] EXYNOS5: Enable console multiplexing in u-boot
Ajay Kumar
- [U-Boot] [PATCH 0/2] video: Fix compilation warnings for exynos video
Ajay Kumar
- [U-Boot] [PATCH 1/2] video: exynos_dp: Remove unused variable disp_info
Ajay Kumar
- [U-Boot] [PATCH 2/2] video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selected
Ajay Kumar
- [U-Boot] [PATCH 0/2] make u-boot/drivers/net/designware cache supportive
Vipin Kumar
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
Vipin Kumar
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
Vipin Kumar
- [U-Boot] [PATCH] board/common: Add support for QIXIS read/write using i2c
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/85xx: Add BSC9132QDS support
Prabhakar Kushwaha
- [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
Prabhakar Kushwaha
- [U-Boot] [PATCH] board/common: Add support for QIXIS read/write using i2c
Prabhakar Kushwaha
- [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
Prabhakar Kushwaha
- [U-Boot] [PATCH][v2] board/common: Add support for QIXIS read/write using i2c
Prabhakar Kushwaha
- [U-Boot] [PATCH][v3] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
Prabhakar Kushwaha
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Mats Kärrman
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Mats Kärrman
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Mats Kärrman
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Mats Kärrman
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Mats Kärrman
- [U-Boot] [RFC] powerpc/lib: unsafe register handling in wait_ticks
Mats Kärrman
- [U-Boot] [PATCH] powerpc/lib: fix unsafe register handling in wait_ticks
Mats Kärrman
- [U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
Mats Kärrman
- [U-Boot] powerpc/mpc85xx: Add revision properties in portal device tree node 'pme'
Jeffrey Ladouceur
- [U-Boot] [PATCH] powerpc/t4240: work around errata A-005977
Chunhe Lan
- [U-Boot] [PATCH] Add DDR3 support for AM335x-EVM (Version 1.5A)
Jeff Lance
- [U-Boot] [PATCH][RFC] MTD resync from Linux-3.8-rc2+ (master)
Sergey Lapin
- [U-Boot] [PATCH] mtd: resync with Linux-3.7.1
Sergey Lapin
- [U-Boot] [PATCH] mtd: resync with Linux-3.7.1
Sergey Lapin
- [U-Boot] [PATCH] mtd: resync with Linux-3.7.1
Sergey Lapin
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Sergey Lapin
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Sergey Lapin
- [PATCH] SQUASHME: mtd: nand: Add ecc.strength support to drivers
Sergey Lapin
- [PATCH] SQUASHME: mtd: nand: Add ecc.strength support to drivers
Sergey Lapin
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Sergey Lapin
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Sergey Lapin
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Sergey Lapin
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Sergey Lapin
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Sergey Lapin
- [U-Boot] Googlers please reply: commiters in U-Boot
Duncan Laurie
- [U-Boot] [PATCH 0/2] EXYNOS: EXYNOS5250: Separate setting configuration of exynos5250 from exynos5
Donghwa Lee
- [U-Boot] [PATCH 1/2] EXYNOS: EXYNOS5250: add exynos5250 register addresses
Donghwa Lee
- [U-Boot] [PATCH 2/2] EXYNOS: EXYNOS5250: add gpio structure for EXYNOS5250
Donghwa Lee
- [U-Boot] Googlers please reply: commiters in U-Boot
Hung-Te Lin
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
Jim Lin
- [U-Boot] [PATCH 1/1] console: USB: KBD: Fix incorrect autoboot timeout
Jim Lin
- [U-Boot] [PATCH 1/1] console: USB: KBD: Fix incorrect autoboot timeout
Jim Lin
- [U-Boot] [PATCH 1/1 v2] console: USB: KBD: Fix incorrect autoboot timeout
Jim Lin
- [U-Boot] [PATCH 1/1 v2] console: USB: KBD: Fix incorrect autoboot timeout
Jim Lin
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect autoboot timeout
Jim Lin
- [U-Boot] [PATCH 1/1] console: Improve TFTP booting performance
Jim Lin
- [U-Boot] [PATCH 1/1] console: Improve TFTP booting performance
Jim Lin
- [U-Boot] [PATCH] nds32: Add a basic errno.h
Macpaul Lin
- [U-Boot] How to add new device driver from Linux driver source
Macpaul Lin
- [U-Boot] [PATCH] powerpc/t4240: Adding workaround errata A-005871
Shengzhou Liu
- [U-Boot] [PATCH v7] qi_lb60: add nand spl support
Xiangfu Liu
- [U-Boot] [PATCH v7] qi_lb60: add nand spl support
Xiangfu Liu
- [U-Boot] Googlers please reply: commiters in U-Boot
Louis Yung-Chieh Lo
- [U-Boot] [PATCH v4 3/4] dtc/libfdt: introduce fdt types for annotation by endian checkers
Jon Loeliger
- [U-Boot] Virtex 4 with XMD
Frank Lombardo
- [U-Boot] [PATCH 0/2] powerpc/p2041: u-boot.pbl build for P2041RDB
Valentin Longchamp
- [U-Boot] [PATCH 1/2] powerpc/p2041: add RCW file for P2041RDB
Valentin Longchamp
- [U-Boot] [PATCH 2/2] powerpc/p2041: set RCW and PBI files for .pbl build or P2041RDB
Valentin Longchamp
- [U-Boot] [PATCH] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE
Lukasz Majewski
- [U-Boot] [PATCH v2] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE
Lukasz Majewski
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Lukasz Majewski
- [U-Boot] Pull request: u-boot-arm/master
Lukasz Majewski
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
Lukasz Majewski
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
Lukasz Majewski
- [U-Boot] [PATCH 1/2] video:cache:fix: Proper buffer alignment for lcd subsystem
Lukasz Majewski
- [U-Boot] [PATCH 2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem
Lukasz Majewski
- [U-Boot] [PATCH 1/2] video:cache:fix: Proper buffer alignment for lcd subsystem
Lukasz Majewski
- [U-Boot] [PATCH] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards
Lukasz Majewski
- [U-Boot] [PATCH v2] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards
Lukasz Majewski
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Lukasz Majewski
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Lukasz Majewski
- [U-Boot] [STATUS] v2013.01-rc3 out
Lukasz Majewski
- [U-Boot] [PATCH] mmc:sdhci:fix: Change default interrupts enabled at SDHCI initialization
Lukasz Majewski
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Lukasz Majewski
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Lukasz Majewski
- [U-Boot] [U-BOOT] help on mmc driver
Lukasz Majewski
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Lukasz Majewski
- [U-Boot] [PATCH] mmc:sdhci:fix: Change default interrupts enabled at SDHCI initialization
Lukasz Majewski
- [U-Boot] access u-boot environment variables from kernel space
Manukumar
- [U-Boot] [PATCH] tegra30: fix UART2 pinmux table entry
Allen Martin
- [U-Boot] [PATCH] fdt: fix dts preprocessor options
Allen Martin
- [U-Boot] [PATCH] tegra30: fix UART2 pinmux table entry
Allen Martin
- [U-Boot] [PATCH] tegra30: cardhu: fix UART2 pinmux settings
Allen Martin
- [U-Boot] [PATCH] tegra30: cardhu: fix UART2 pinmux settings
Allen Martin
- [U-Boot] [PATCH] tegra: remove IRDA pinmux synonym
Allen Martin
- [U-Boot] [PATCH 0/7] tegra: SPI drivers
Allen Martin
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
Allen Martin
- [U-Boot] [PATCH 2/7] tegra: spi: add fdt support to tegra SPI SFLASH driver
Allen Martin
- [U-Boot] [PATCH 3/7] tegra30: add SBC1 to periph id mapping table
Allen Martin
- [U-Boot] [PATCH 4/7] tegra30: fdt: add SPI SLINK nodes
Allen Martin
- [U-Boot] [PATCH 5/7] tegra: add addresses of SPI SLINK controllers
Allen Martin
- [U-Boot] [PATCH 6/7] tegra: add SPI SLINK driver
Allen Martin
- [U-Boot] [PATCH 7/7] tegra: cardhu: config: enable SPI
Allen Martin
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
Allen Martin
- [U-Boot] [PATCH 2/7] tegra: spi: add fdt support to tegra SPI SFLASH driver
Allen Martin
- [U-Boot] [PATCH 4/7] tegra30: fdt: add SPI SLINK nodes
Allen Martin
- [U-Boot] [PATCH 6/7] tegra: add SPI SLINK driver
Allen Martin
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
Allen Martin
- [U-Boot] [PATCH v2 0/9] tegra: SPI drivers
Allen Martin
- [U-Boot] [PATCH v2 1/9] tegra: fdt: sort dts files
Allen Martin
- [U-Boot] [PATCH v2 2/9] tegra: fdt: add apbdma node
Allen Martin
- [U-Boot] [PATCH v2 3/9] tegra20: fdt: add SPI SFLASH node
Allen Martin
- [U-Boot] [PATCH v2 4/9] tegra: spi: add fdt support to tegra SPI SFLASH driver
Allen Martin
- [U-Boot] [PATCH v2 5/9] tegra30: add SBC1 to periph id mapping table
Allen Martin
- [U-Boot] [PATCH v2 6/9] tegra30: fdt: add SPI SLINK nodes
Allen Martin
- [U-Boot] [PATCH v2 7/9] tegra: add addresses of SPI SLINK controllers
Allen Martin
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
Allen Martin
- [U-Boot] [PATCH v2 9/9] tegra: cardhu: config: enable SPI
Allen Martin
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
Allen Martin
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
Allen Martin
- [U-Boot] [PATCH] tegra: fdt: remove clocks nodes
Allen Martin
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
Allen Martin
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
Allen Martin
- [U-Boot] [PATCH v2] tegra: fdt: remove clocks nodes
Allen Martin
- [U-Boot] [PATCH] tegra: fdt: sort dts files
Allen Martin
- [U-Boot] [PATCH v3 0/7] tegra: SPI drivers
Allen Martin
- [U-Boot] [PATCH v3 1/7] tegra20: fdt: add SPI SFLASH node
Allen Martin
- [U-Boot] [PATCH v3 2/7] tegra: spi: add fdt support to tegra SPI SFLASH driver
Allen Martin
- [U-Boot] [PATCH v3 3/7] tegra30: add SBC1 to periph id mapping table
Allen Martin
- [U-Boot] [PATCH v3 4/7] tegra30: fdt: add SPI SLINK nodes
Allen Martin
- [U-Boot] [PATCH v3 5/7] tegra: add addresses of SPI SLINK controllers
Allen Martin
- [U-Boot] [PATCH v3 6/7] tegra: add SPI SLINK driver
Allen Martin
- [U-Boot] [PATCH v3 7/7] tegra: cardhu: config: enable SPI
Allen Martin
- [U-Boot] [Patch v2] Introduce a global bool type
Allen Martin
- [U-Boot] [Patch v2] Introduce a global bool type
Allen Martin
- [U-Boot] [PATCH] sandbox: fix compiler warning
Allen Martin
- [U-Boot] [PATCH] sandbox: fix compiler warning
Allen Martin
- [U-Boot] [PATCH v2] sandbox: fix compiler warning
Allen Martin
- [U-Boot] [PATCH] sandbox: fix compiler warning
Allen Martin
- [U-Boot] [PATCH v3] sandbox: fix compiler warning
Allen Martin
- [U-Boot] [PATCH] tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
Allen Martin
- [U-Boot] [PATCH v3] sandbox: fix compiler warning
Allen Martin
- [U-Boot] [Patch v3] Consolidate bool type
Allen Martin
- [U-Boot] [Patch v3] Consolidate bool type
Allen Martin
- [U-Boot] [Patch v3] Consolidate bool type
Allen Martin
- [U-Boot] [Patch v3] Consolidate bool type
Allen Martin
- [U-Boot] [PATCH] MAKEALL: add support for per architecture toolchains
Allen Martin
- [U-Boot] [RFC Patch v5] Consolidate bool type
Allen Martin
- [U-Boot] [PATCH v2] tegra: fdt: sort dts files
Allen Martin
- [U-Boot] [RFC Patch v6] Consolidate bool type
Allen Martin
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
Allen Martin
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
Allen Martin
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
Allen Martin
- [U-Boot] [PATCH v4 0/7] tegra: SPI drivers
Allen Martin
- [U-Boot] [PATCH v4 1/7] tegra20: fdt: add SPI SFLASH node
Allen Martin
- [U-Boot] [PATCH v4 2/7] tegra: spi: add fdt support to tegra SPI SFLASH driver
Allen Martin
- [U-Boot] [PATCH v4 3/7] tegra30: add SBC1 to periph id mapping table
Allen Martin
- [U-Boot] [PATCH v4 4/7] tegra30: fdt: add SPI SLINK nodes
Allen Martin
- [U-Boot] [PATCH v4 5/7] tegra: add addresses of SPI SLINK controllers
Allen Martin
- [U-Boot] [PATCH v4 6/7] tegra: add SPI SLINK driver
Allen Martin
- [U-Boot] [PATCH v4 7/7] tegra: cardhu: config: enable SPI
Allen Martin
- [U-Boot] [PATCH v4 0/7] tegra: SPI drivers
Allen Martin
- [U-Boot] [PATCH v2] MAKEALL: add support for per architecture toolchains
Allen Martin
- [U-Boot] CONFIG_DELAY_ENVIRONMENT usage
Allen Martin
- [U-Boot] CONFIG_DELAY_ENVIRONMENT usage
Allen Martin
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Allen Martin
- [U-Boot] [RFC Patch v6] Consolidate bool type
Allen Martin
- [U-Boot] [RFC Patch v6] Consolidate bool type
Allen Martin
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Allen Martin
- [U-Boot] [RFC Patch v6] Consolidate bool type
Allen Martin
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Allen Martin
- [U-Boot] [PATCH] serial/ns16550: don't generate functions for undefined ports
McClintock Matthew-B29882
- [U-Boot] [PATCH] Makefile: remove MLO.byteswap on clobber
Nishanth Menon
- [U-Boot] [PATCH] Makefile: remove MLO.byteswap on clobber
Nishanth Menon
- [U-Boot] [PATCH] configs: omap4_common: support load from uEnv.txt
Nishanth Menon
- [U-Boot] [PATCH] configs: omap4_common: support load from uEnv.txt
Nishanth Menon
- [U-Boot] [PATCH v2 1/1] omap4: allow the use of a plain text env file instead boot scripts
Nishanth Menon
- [U-Boot] Raspberry pi
Haneef Mohamed
- [U-Boot] the boot process breaks.
Yann R. Moupinda
- [U-Boot] u-boot build error [from v2013.01 onwards]
Vikram Narayanan
- [U-Boot] i.MX6 Solo and Dual Lite
Eric Nelson
- [U-Boot] i.MX6 Solo and Dual Lite
Eric Nelson
- [U-Boot] [RFC] Add Nitrogen6x support.
Eric Nelson
- [U-Boot] [RFC PATCH] Add support for Boundary Devices Nitrogen6x boards
Eric Nelson
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Robert Nelson
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Robert Nelson
- [U-Boot] [RFC] Is anyone interested IPv6 support for u-boot
Chris Packham
- [U-Boot] [RFC] Is anyone interested IPv6 support for u-boot
Chris Packham
- [U-Boot] Function prototype conflicts with standalone apps
Chris Packham
- [PATCH] exports.h: add required definitions from common.h
Chris Packham
- [RFC/PATCH] common.h: move definitions needed by standalone
Chris Packham
- [U-Boot] Function prototype conflicts with standalone apps
Chris Packham
- [U-Boot] [RFC PATCH 0/2] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH 1/2] Initial net6.h
Chris Packham
- [U-Boot] [RFC PATCH 2/2] lib/vsprintf.c: add IPv6 compressed format %pI6c
Chris Packham
- [U-Boot] Function prototype conflicts with standalone apps
Chris Packham
- [U-Boot] [RFC PATCH 0/2] Initial IPv6 support
Chris Packham
- [U-Boot] Function prototype conflicts with standalone apps
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH v2 1/5] Initial net6.h
Chris Packham
- [U-Boot] [RFC PATCH v2 2/5] lib/vsprintf.c: add IPv6 compressed format %pI6c
Chris Packham
- [U-Boot] [RFC PATCH v2 3/5] lib/net_utils.c: make string_to_ip stricter
Chris Packham
- [U-Boot] [RFC PATCH v2 4/5] lib/net_utils.c: add string_to_ip6
Chris Packham
- [U-Boot] [RFC PATCH v2 5/5] common.h: add getenv_IP6addr
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH v3 0/7] Initial IPv6 support
Chris Packham
- [U-Boot] [RFC PATCH v3 1/7] Initial net6.h
Chris Packham
- [U-Boot] [RFC PATCH v3 2/7] lib/vsprintf.c: add IPv6 compressed format %pI6c
Chris Packham
- [U-Boot] [RFC PATCH v3 3/7] lib/net_utils.c: make string_to_ip stricter
Chris Packham
- [U-Boot] [RFC PATCH v3 4/7] lib/net_utils.c: add string_to_ip6
Chris Packham
- [U-Boot] [RFC PATCH v3 5/7] common.h: add getenv_IP6addr
Chris Packham
- [U-Boot] [RFC PATCH v3 6/7] tsec: enable promiscuous mode for IPv6
Chris Packham
- [U-Boot] [RFC PATCH v3 7/7] net: ipv6 support
Chris Packham
- [U-Boot] Googlers please reply: commiters in U-Boot
Vincent Palatin
- [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to lowlevel_init_c.c
Kyungmin Park
- [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to lowlevel_init_c.c
Kyungmin Park
- [U-Boot] Booting different kernel from U-Boot based on time stamp
Hemal Patel
- [U-Boot] Booting different kernel from U-Boot based on time stamp
Hemal Patel
- [U-Boot] Booting different kernel from U-Boot based on time stamp
Hemal Patel
- [U-Boot] Googlers please reply: commiters in U-Boot
Sean Paul
- [U-Boot] Is used rootfs dependent from the U-boot command-line?
Martin Peevski
- [U-Boot] Writting uImage from linux using nandwrite on Blackfin based system
Dimitar Penev
- [U-Boot] NAND flash - bad blocks
Dimitar Penev
- [U-Boot] NAND flash - bad blocks
Dimitar Penev
- [U-Boot] NAND flash - bad blocks
Dimitar Penev
- [U-Boot] [U-Boot Web-Documentation misses command nand]
Christoph Petzold
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
Kim Phillips
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host configuration
Kim Phillips
- [U-Boot] [RFC PATCH 1/2] Initial net6.h
Kim Phillips
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
Kim Phillips
- [U-Boot] [PATCH 2/5] libfdt_env.h: add fdt type definitions
Kim Phillips
- [U-Boot] [PATCH 3/5] libfdt: update fdt.h from upstream dtc
Kim Phillips
- [U-Boot] [PATCH 4/5] libfdt: update from upstream dtc commit 142419e
Kim Phillips
- [U-Boot] [PATCH 5/5 v2] common/fdt_support.c: sparse fixes
Kim Phillips
- [U-Boot] [PATCH 1/2] net: make IPaddr type big endian
Kim Phillips
- [U-Boot] [PATCH 2/2] net/tftp: sparse fixes
Kim Phillips
- [U-Boot] [GIT PULL] u-boot-mpc83xx: support for new SPL
Kim Phillips
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
Kim Phillips
- [U-Boot] [PATCH 04/15] km82xx, km83xx: move ethernet_present() from common to cpu specific
Kim Phillips
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch support for kmvect1
Kim Phillips
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host configuration
Kim Phillips
- [U-Boot] [PATCH 04/15] km82xx, km83xx: move ethernet_present() from common to cpu specific
Kim Phillips
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch support for kmvect1
Kim Phillips
- [U-Boot] [RFC PATCH v2 1/5] Initial net6.h
Kim Phillips
- [U-Boot] how to create patches for mailing
Maxim Podbereznyy
- [U-Boot] how to create patches for mailing
Maxim Podbereznyy
- [U-Boot] [PATCH 0/1] Add support for new SomIQ-AM37 system on module
Maxim Podbereznyy
- [U-Boot] [PATCH 1/1] Add support for new SomIQ-AM37 system on module from MENTOREL Ltd SomIQ-AM37 is based on TI AM37/DM37 processors
Maxim Podbereznyy
- [U-Boot] [PATCH 1/2] am33xx: add a pulldown macro to pinmux config
Lars Poeschel
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
Lars Poeschel
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
Lars Poeschel
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
Lars Poeschel
- [U-Boot] [PATCH v2 1/3] am33xx: add a pulldown macro to pinmux config
Lars Poeschel
- [U-Boot] [PATCH v2 2/3] pcm051: Add support for Phytec phyCORE-AM335x
Lars Poeschel
- [U-Boot] [PATCH v2 3/3] am335x: display msg when reading MAC from efuse
Lars Poeschel
- [U-Boot] B4860/B4420 patches and some updates for qixis and T4240QDS
Aggrwal Poonam-B10812
- [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI
Satendra Pratap
- [U-Boot] uboot and Ethernet Controller issue
Sandeep C R
- [U-Boot] Googlers please reply: commiters in U-Boot
Sonny Rao
- [U-Boot] [PATCH V3 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amarendra Reddy
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Amarendra Reddy
- [U-Boot] [PATCH V3 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amarendra Reddy
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Amarendra Reddy
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Amarendra Reddy
- [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support EMMC booting
Amarendra Reddy
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
Amarendra Reddy
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
Amarendra Reddy
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amarendra Reddy
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
Amarendra Reddy
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to
Amarendra Reddy
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
Amarendra Reddy
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amarendra Reddy
- [U-Boot] [PATCH V4 2/9] EXYNOS5: FDT: Add DWMMC device node data
Amarendra Reddy
- [U-Boot] [PATCH V4 8/9] SMDK5250: Enable EMMC booting
Amarendra Reddy
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
Amarendra Reddy
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amarendra Reddy
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amarendra Reddy
- [U-Boot] [PATCH V5 02/10] EXYNOS5: FDT: Add DWMMC device node data
Amarendra Reddy
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amarendra Reddy
- [U-Boot] [PATCH V5 04/10] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amarendra Reddy
- [U-Boot] [PATCH V5 07/10] MMC: APIs to support resize of EMMC boot partition
Amarendra Reddy
- [U-Boot] [PATCH V5 09/10] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Amarendra Reddy
- [U-Boot] [PATCH V5 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C
Amarendra Reddy
- [U-Boot] [PATCH] Remove duplication of CONFIG_BOOTCOUNT_LIMIT
Ashok Kumar Reddy
- [U-Boot] Googlers please reply: commiters in U-Boot
Stefan Reinauer
- [U-Boot] U-Boot Graphics Library?
Andre Renaud
- [U-Boot] Googlers please reply: commiters in U-Boot
Bill Richardson
- [U-Boot] [PATCH 0/2] calimain: Generate random MAC address for factory testing
Christian Riesch
- [U-Boot] [PATCH 1/2] net: Remove call of srand from eth_random_enetaddr()
Christian Riesch
- [U-Boot] [PATCH 2/2] calimain: Generate random MAC address for factory tests
Christian Riesch
- [U-Boot] [PATCH 1/2] net: Remove call of srand from eth_random_enetaddr()
Christian Riesch
- [U-Boot] [PATCH 2/2] calimain: Generate random MAC address for factory tests
Christian Riesch
- [U-Boot] [PATCH 1/1] omap4: use plain text env file instead boot scripts
Tom Rini
- [U-Boot] [PATCH 3/5] am335x_evm: enable support for booting via USB
Tom Rini
- [U-Boot] [PATCH 5/5] am335x_evm: add new config with forced USB booting
Tom Rini
- [U-Boot] [PATCH 2/5] am33xx: support for booting via usbeth
Tom Rini
- [U-Boot] [RFC][PULL-REQ] MTD update
Tom Rini
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
Tom Rini
- [U-Boot] Please pull u-boot-x86.git
Tom Rini
- [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT value
Tom Rini
- [U-Boot] [PATCH] nds32: Add a basic errno.h
Tom Rini
- [U-Boot] [PATCH] nds32: Add a basic errno.h
Tom Rini
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
Tom Rini
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
Tom Rini
- [U-Boot] [PATCH v2 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
Tom Rini
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
Tom Rini
- [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S
Tom Rini
- [U-Boot] [PATCH v4 2/2] arm: remove useless code in start.S files
Tom Rini
- [U-Boot] [PATCH 0/7] omap mmc: implement card detect and write protection
Tom Rini
- [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
Tom Rini
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
Tom Rini
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
Tom Rini
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
Tom Rini
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO LED
Tom Rini
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO LED
Tom Rini
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO LED
Tom Rini
- [U-Boot] bootm: relocate names of sub-command table for archs with CONFIG_NEEDS_MANUAL_RELOC
Tom Rini
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [STATUS] v2013.01-rc3 out
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [U-Boot, 1/1] OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_NAND_SUPPORT
Tom Rini
- [U-Boot] Makefile: remove MLO.byteswap on clobber
Tom Rini
- [U-Boot] [U-Boot, 1/2] serial/ns16550: add an option to avoid hanging on broken platforms
Tom Rini
- [U-Boot] [U-Boot, 2/2] OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMT
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
Tom Rini
- [U-Boot] [STATUS] v2013.01-rc3 out
Tom Rini
- [U-Boot] [PATCH] watchdog.h: Move hw_watchdog_init prototype to end, guard
Tom Rini
- [U-Boot] Pull request: u-boot-staging
Tom Rini
- [U-Boot] Pull request: u-boot-video/master
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [U-Boot, 3/3] pxa: Save lr register in relocate_code function
Tom Rini
- [U-Boot] [STATUS] v2013.01 released
Tom Rini
- [U-Boot] [STATUS] v2013.01 released
Tom Rini
- [U-Boot] [PATCH v2 1/1] omap4: allow the use of a plain text env file instead boot scripts
Tom Rini
- [U-Boot] [PATCH 0/5] Add splash screen for CM-T35
Tom Rini
- [U-Boot] [STATUS] Patchwork
Tom Rini
- [U-Boot] [GIT PULL] u-boot-mips/master
Tom Rini
- [U-Boot] [PATCH 1/1] am335x_evm: Add am335x_evm_usbspl boot target
Tom Rini
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
Tom Rini
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
Tom Rini
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
Tom Rini
- [U-Boot] [PATCH v2 2/3] pcm051: Add support for Phytec phyCORE-AM335x
Tom Rini
- [U-Boot] [U-Boot, v2, 1/1] omap4: allow the use of a plain text env file instead boot scripts
Tom Rini
- [U-Boot] Add DDR3 support for AM335x-EVM (Version 1.5A)
Tom Rini
- [U-Boot] [PATCH v2 1/3] am33xx: add a pulldown macro to pinmux config
Tom Rini
- [U-Boot] [PATCH v2 3/3] am335x: display msg when reading MAC from efuse
Tom Rini
- [U-Boot] [U-Boot, 1/3] gpio: Build the da8xx_gpio code for the davinci644x device
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] OMAP3: use a single board file for IGEP devices
Tom Rini
- [U-Boot] [U-Boot, v5, 2/2] OMAP3: igep00x0: add boot status GPIO LED
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] [PATCH 1/1] OMAP3: igep00x0: fix a build warning on IGEP boards
Tom Rini
- [U-Boot] FAT - problem with new mkcksum implementation
Tom Rini
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect autoboot timeout
Tom Rini
- [U-Boot] [PATCH] am335x: NAND: add BCH16 and 4k page size support
Tom Rini
- [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM configurable, CONFIG_MAC_EEPROM_ADDR
Tom Rini
- [U-Boot] [U-Boot,GIT,PULL] u-boot-mpc83xx: support for new SPL
Tom Rini
- [U-Boot] [PULL] : Please pull u-boot-i2c
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] [GIT PULL] u-boot-mips/master
Tom Rini
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Tom Rini
- [U-Boot] [U-Boot, v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Tom Rini
- [U-Boot] [PATCH 1/7] ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register
Tom Rini
- [U-Boot] [PATCH 2/7] ARM: OMAP4+: Change the PRCM structure prototype common for all Socs
Tom Rini
- [U-Boot] [PATCH 3/7] ARM: OMAP4+: Cleanup the clocks layer
Tom Rini
- [U-Boot] [PATCH 4/7] ARM: OMAP4+: Clean up the pmic code
Tom Rini
- [U-Boot] [PATCH 5/7] ARM: OMAP4+: Cleanup emif specific files
Tom Rini
- [U-Boot] [PATCH 6/7] ARM: OMAP4+: Make control module register structure generic
Tom Rini
- [U-Boot] [PATCH 7/7] ARM: OMAP5: Clean up iosettings code
Tom Rini
- [U-Boot] [PATCH 1/5] ARM: OMAP5: Add silicon id support for ES2.0 revision.
Tom Rini
- [U-Boot] [PATCH 2/5] ARM: OMAP5: clock: Add the prcm register changes required for ES2.0
Tom Rini
- [U-Boot] [PATCH 3/5] ARM: OMAP5: clocks: Add OPP settings required for OMAP543X ES2.0 soc
Tom Rini
- [U-Boot] [PATCH 4/5] ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs
Tom Rini
- [U-Boot] [PATCH 5/5] ARM: OMAP5: srcomp: enable slew rate compensation cells after powerup
Tom Rini
- [U-Boot] patman changes?
Tom Rini
- [U-Boot] vfat: Fix mkcksum argument sizes
Tom Rini
- [U-Boot] [ANNOUNCE] Release v2013.01.01
Tom Rini
- [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM configurable, CONFIG_MAC_EEPROM_ADDR
Tom Rini
- [U-Boot] [PATCH] env: Allow accessing non-mtd devices
Lubomir Rintel
- [U-Boot] [PATCH] env: Allow accessing non-mtd devices
Lubomir Rintel
- [U-Boot] [RFC PATCH 1/2] ARM: cache: Introduce weak dram_bank_setup function
Stefan Roese
- [U-Boot] Regarding M29W128GL Support in u-boot
Stefan Roese
- [U-Boot] patches status
Stefan Roese
- [U-Boot] [PATCH 1/1] mtd/cfi: add support for SST 4KB sector granularity
Stefan Roese
- [U-Boot] [PATCH 1/4] cfi_flash: Add manufact_match helper function
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] [PATCH v5 07/20] env: Add support for callbacks to environment vars
Stefan Roese
- [U-Boot] BDI3000 - Unprotect flash sectors
Stefan Roese
- [U-Boot] [PATCH v5 07/20] env: Add support for callbacks to environment vars
Stefan Roese
- [U-Boot] [PATCH] powerpc/lib: fix unsafe register handling in wait_ticks
Stefan Roese
- [U-Boot] [PATCH 4/7] MIPS: vct: remove custom u-boot.lds script
Stefan Roese
- [U-Boot] [PATCH v2 1/7] MIPS: add unified u-boot.lds file
Stefan Roese
- [U-Boot] [PATCH 01/10] lcd, amba: remove this frame buffer driver since it is not used
Alessandro Rubini
- [U-Boot] [PATCH] Introduce a global bool type
Måns Rullgård
- [U-Boot] [PATCH] Introduce a global bool type
Måns Rullgård
- [U-Boot] [PATCH] Introduce a global bool type
Måns Rullgård
- [U-Boot] [PATCH] Introduce a global bool type
Måns Rullgård
- [U-Boot] [RFC PATCH 3/4] x86: Allow cmdline setup in setup_zimage() to be optional
Graeme Russ
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions
Langer Thomas (LQDE RD ST PON SW)
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions
Langer Thomas (LQDE RD ST PON SW)
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Otavio Salvador
- [U-Boot] [PATCH v2 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
Otavio Salvador
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v3 0/6] Improve default environment for easy use
Otavio Salvador
- [U-Boot] [PATCH v3 1/6] mx6qsabrelite: Use tabs to environment setting
Otavio Salvador
- [U-Boot] [PATCH v3 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
Otavio Salvador
- [U-Boot] [PATCH v3 3/6] mx28evk: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v3 4/6] mx53loco: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v3 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v3 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v3 3/6] mx28evk: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v4 0/6] Improve default environment for easy use
Otavio Salvador
- [U-Boot] [PATCH v4 1/6] mx6qsabrelite: Use tabs to environment setting
Otavio Salvador
- [U-Boot] [PATCH v4 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
Otavio Salvador
- [U-Boot] [PATCH v4 3/6] mx28evk: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v4 4/6] mx53loco: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v4 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v4 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v4 3/6] mx28evk: Add support to dynamically choose between ftd use or not
Otavio Salvador
- [U-Boot] [PATCH v5 0/6] Improve default environment for easy use
Otavio Salvador
- [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment setting
Otavio Salvador
- [U-Boot] [PATCH v5 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
Otavio Salvador
- [U-Boot] [PATCH v5 3/6] mx28evk: Add support to dynamically choose between fdt use or not
Otavio Salvador
- [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose between fdt use or not
Otavio Salvador
- [U-Boot] [PATCH v5 5/6] mx6qsabrelite: Add support to dynamically choose between fdt use or not
Otavio Salvador
- [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not
Otavio Salvador
- [U-Boot] [PATCH] mx6qsabresd: Fix booting the kernel from SDHC3
Otavio Salvador
- [U-Boot] [PATCH v2] mx6qsabresd: Fix booting the kernel from SDHC3
Otavio Salvador
- [U-Boot] [PATCH v6 0/6] Improve default environment for easy use
Otavio Salvador
- [U-Boot] [PATCH v6 1/6] mx6qsabrelite: Use tabs to environment setting
Otavio Salvador
- [U-Boot] [PATCH v6 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
Otavio Salvador
- [U-Boot] [PATCH v6 3/6] mx28evk: Add support to dynamically choose between fdt use or not
Otavio Salvador
- [U-Boot] [PATCH v6 4/6] mx53loco: Add support to dynamically choose between fdt use or not
Otavio Salvador
- [U-Boot] [PATCH v6 5/6] mx6qsabrelite: Add support to dynamically choose between fdt use or not
Otavio Salvador
- [U-Boot] [PATCH v6 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not
Otavio Salvador
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
Otavio Salvador
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
Otavio Salvador
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
Otavio Salvador
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
Otavio Salvador
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
Otavio Salvador
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
Otavio Salvador
- [U-Boot] [PATCH] mx6qsabre_common: Let mmc partition be board specific
Otavio Salvador
- [U-Boot] [PATCH] mxs: Boost the memory power supply
Otavio Salvador
- [U-Boot] [PATCH] mxs: Boost the memory power supply
Otavio Salvador
- [U-Boot] [PATCH V2] mxs: Boost the memory power supply
Otavio Salvador
- [U-Boot] [PATCH 0/9] iMX23 MMC support and environment addition
Otavio Salvador
- [U-Boot] [PATCH 1/9] mx23: Add SSP registers map
Otavio Salvador
- [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode
Otavio Salvador
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
Otavio Salvador
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support
Otavio Salvador
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection
Otavio Salvador
- [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and timeout in iMX23
Otavio Salvador
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Otavio Salvador
- [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode
Otavio Salvador
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
Otavio Salvador
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Otavio Salvador
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection
Otavio Salvador
- [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support
Otavio Salvador
- [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and timeout in iMX23
Otavio Salvador
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Otavio Salvador
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Otavio Salvador
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
Otavio Salvador
- [U-Boot] [PATCH 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH v3 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH v4 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH v4 2/2] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH v5 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH v5 2/2] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH v5 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH v6 2/2] mx23evk: Add initial board support
Otavio Salvador
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Otavio Salvador
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Otavio Salvador
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Otavio Salvador
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Otavio Salvador
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Otavio Salvador
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Otavio Salvador
- [U-Boot] [PATCH 1/3] mxs: Use SoC agnostic configuration option for power switch setting
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx23: Enable bit 24 of HW_DRAM_CTL08 as did in imx-bootlets
Otavio Salvador
- [U-Boot] [PATCH 3/3] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Otavio Salvador
- [U-Boot] [PATCH v2 1/3] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Otavio Salvador
- [U-Boot] [PATCH v2 3/3] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Otavio Salvador
- [U-Boot] [PATCH] configs: mx28evk: Use single-line comments
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Otavio Salvador
- [U-Boot] [PATCH 1/2] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH 1/3] mx23evk: Remove unneeded 'undef's
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
Otavio Salvador
- [U-Boot] [PATCH v3 1/2] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v4 1/3] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
Otavio Salvador
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
Otavio Salvador
- [U-Boot] [PATCH v4 3/3] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
Otavio Salvador
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
Otavio Salvador
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
Otavio Salvador
- [U-Boot] [PATCH v5 1/3] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
Otavio Salvador
- [U-Boot] [PATCH v5 2/3] mxs: Fix iomux.h to not break build during assembly stage
Otavio Salvador
- [U-Boot] [PATCH v5 3/3] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v4 3/3] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH 1/4] usb: mxs: Disable USB Port 1 for i.MX23
Otavio Salvador
- [U-Boot] [PATCH 2/4] mx23evk: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH 3/4] mx23_olinuxino: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH 3/4] mx23_olinuxino: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH v2 1/4] usb: mxs: Disable USB Port 1 for i.MX23
Otavio Salvador
- [U-Boot] [PATCH v2 2/4] mx23evk: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH v2 3/4] mx23_olinuxino: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH v2 4/4] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH v2 4/4] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH v3 1/4] usb: mxs: Disable USB Port 1 for i.MX23
Otavio Salvador
- [U-Boot] [PATCH v3 2/4] mx23evk: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH v3 3/4] mx23_olinuxino: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH v3 4/4] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Otavio Salvador
- [U-Boot] [PATCH] mxs: Reset the EMI block on mx23
Otavio Salvador
- [U-Boot] [PATCH v3 1/3] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT
Otavio Salvador
- [U-Boot] [PATCH v3 2/3] mx23: Document the tRAS lockout setting in memory initialization
Otavio Salvador
- [U-Boot] [PATCH v3 3/3] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Otavio Salvador
- [U-Boot] [PATCH v6 1/3] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
Otavio Salvador
- [U-Boot] [PATCH v6 2/3] mxs: Fix iomux.h to not break build during assembly stage
Otavio Salvador
- [U-Boot] [PATCH v6 3/3] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH v4 1/4] usb: mxs: Disable USB Port 1 for i.MX23
Otavio Salvador
- [U-Boot] [PATCH v4 2/4] mx23evk: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH v4 3/4] mx23_olinuxino: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH v4 4/4] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Otavio Salvador
- [U-Boot] MX23 patches
Otavio Salvador
- [U-Boot] [PATCH 0/10] mx23/mxs pending patches
Otavio Salvador
- [U-Boot] [PATCH 01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT
Otavio Salvador
- [U-Boot] [PATCH 02/10] mx23: Document the tRAS lockout setting in memory initialization
Otavio Salvador
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Otavio Salvador
- [U-Boot] [PATCH 04/10] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
Otavio Salvador
- [U-Boot] [PATCH 05/10] mxs: Fix iomux.h to not break build during assembly stage
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH 07/10] usb: mxs: Disable USB Port 1 for i.MX23
Otavio Salvador
- [U-Boot] [PATCH 08/10] mx23evk: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH 09/10] mx23_olinuxino: Enable USB support
Otavio Salvador
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH 05/10] mxs: Fix iomux.h to not break build during assembly stage
Otavio Salvador
- [U-Boot] [PATCH 02/10] mx23: Document the tRAS lockout setting in memory initialization
Otavio Salvador
- [U-Boot] [PATCH 01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT
Otavio Salvador
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH 07/10] usb: mxs: Disable USB Port 1 for i.MX23
Otavio Salvador
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Otavio Salvador
- [U-Boot] [PATCH 0/7 v5] Add TMU support for Exynos5250 based SMDK5250
Akshay Saraswat
- [U-Boot] [PATCH 1/7 v5] EXYNOS5: TMU: Add driver for Thermal Management Unit
Akshay Saraswat
- [U-Boot] [PATCH 2/7 v5] EXYNOS5: Implement board_poweroff for Thermal Management Unit
Akshay Saraswat
- [U-Boot] [PATCH 3/7 v5] EXYNOS5: FDT: Add TMU device node values
Akshay Saraswat
- [U-Boot] [PATCH 4/7 v5] EXYNOS5: TMU: Add TMU init and status check
Akshay Saraswat
- [U-Boot] [PATCH 5/7 v5] EXYNOS5: Config: Enable support for Exynos TMU driver
Akshay Saraswat
- [U-Boot] [PATCH 6/7 v5] TMU: Add TMU support in dtt command
Akshay Saraswat
- [U-Boot] [PATCH 7/7 v5] EXYNOS5: Config: Enable dtt command for TMU
Akshay Saraswat
- [U-Boot] [PATCH 0/9 v6] Add TMU support for Exynos5250 based SMDK5250
Akshay Saraswat
- [U-Boot] [PATCH 1/9 v6] EXYNOS5: TMU: Add driver for Thermal Management Unit
Akshay Saraswat
- [U-Boot] [PATCH 2/9 v6] EXYNOS5: Implement board_poweroff for Thermal Management Unit
Akshay Saraswat
- [U-Boot] [PATCH 3/9 v6] EXYNOS5: FDT: Add TMU device node values
Akshay Saraswat
- [U-Boot] [PATCH 4/9 v6] EXYNOS5: TMU: Add TMU init and status check
Akshay Saraswat
- [U-Boot] [PATCH 5/9 v6] EXYNOS5: Config: Enable support for Exynos TMU driver
Akshay Saraswat
- [U-Boot] [PATCH 6/9 v6] TMU: Add TMU support in dtt command
Akshay Saraswat
- [U-Boot] [PATCH 7/9 v6] EXYNOS5: Config: Enable dtt command for TMU
Akshay Saraswat
- [U-Boot] [PATCH 8/9 v6] EXYNOS5: TMU: Add hardware tripping
Akshay Saraswat
- [U-Boot] [PATCH 9/9 v6] EXYNOS5: FDT: Add a H/W-trip member to TMU node
Akshay Saraswat
- [U-Boot] [PATCH 0/9 v7] Add TMU support for Exynos5250 based SMDK5250
Akshay Saraswat
- [U-Boot] [PATCH 1/9 v7] EXYNOS5: TMU: Add driver for Thermal Management Unit
Akshay Saraswat
- [U-Boot] [PATCH 2/9 v7] EXYNOS5: Implement board_poweroff for Thermal Management Unit
Akshay Saraswat
- [U-Boot] [PATCH 3/9 v7] EXYNOS5: FDT: Add TMU device node values
Akshay Saraswat
- [U-Boot] [PATCH 4/9 v7] EXYNOS5: TMU: Add TMU init and status check
Akshay Saraswat
- [U-Boot] [PATCH 5/9 v7] EXYNOS5: Config: Enable support for Exynos TMU driver
Akshay Saraswat
- [U-Boot] [PATCH 6/9 v7] TMU: Add TMU support in dtt command
Akshay Saraswat
- [U-Boot] [PATCH 7/9 v7] EXYNOS5: Config: Enable dtt command for TMU
Akshay Saraswat
- [U-Boot] [PATCH 8/9 v7] EXYNOS5: TMU: Add hardware tripping
Akshay Saraswat
- [U-Boot] [PATCH 9/9 v7] EXYNOS5: FDT: Add a H/W-trip member to TMU node
Akshay Saraswat
- [U-Boot] USB3.0 support snacs 0 storage device
Satendra...
- [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
Jens Scharsig
- [U-Boot] [STATUS] v2013.01-rc3 out
Jens Scharsig
- [U-Boot] [PATCH V2] I2C: S3C24X0: Resolve build error for VCMA9
Heiko Schocher
- [U-Boot] Divide uboot into two parts
Heiko Schocher
- [U-Boot] [PULL] : Please pull u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH 1/4] board: xilinx: Remove unused ancient i2c driver
Heiko Schocher
- [U-Boot] csb1724 88f6282
Mario Schuknecht
- [U-Boot] [PATCH v7] qi_lb60: add nand spl support
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: bootm.c: use debug macro to print debug message
Daniel Schwierzeck
- [U-Boot] [PATCH 3/3] MIPS: bootm.c: add support for 'prep' and 'go' subcommands
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] board/qemu-mips: fix a typo in README
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] board/qemu-mips: add '-M mips' switch to the example usage command
Daniel Schwierzeck
- [U-Boot] [RFC 3/3] MIPS: bootm.c: integrate QEMU specific functions
Daniel Schwierzeck
- [U-Boot] [GIT PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] MIPS: use inline directive for __in*s functions
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] MIPS: convert IO port accessor functions to 'static inline'
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: start{, 64}.S: fill branch delay slots with NOP instructions
Daniel Schwierzeck
- [U-Boot] [PATCH 0/5] MIPS: start.S: relocate_code fixes and cleanups
Daniel Schwierzeck
- [U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
Daniel Schwierzeck
- [U-Boot] [PATCH v2] MIPS: simplify relocated _G_O_T_ address calculation
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: xburst: simplify relocation offset calculation
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: remove OUTPUT_FORMAT from linker scripts
Daniel Schwierzeck
- [U-Boot] [PATCH v2 0/7] MIPS: use an unified u-boot.lds script
Daniel Schwierzeck
- [U-Boot] [GIT PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] Googlers please reply: commiters in U-Boot
Luigi Semenzato
- [U-Boot] [PATCH] net/phy: fix select line for TN80xx
Xie Shaohui-B21989
- [U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Xie Shaohui-B21989
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Xie Shaohui-B21989
- [U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Xie Shaohui-B21989
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Xie Shaohui-B21989
- [U-Boot] [PATCH] powerpc/p2041: fix serdes reference clock frequency for PC board
Xie Shaohui-B21989
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
Xie Shaohui-B21989
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
Xie Shaohui-B21989
- [U-Boot] [PATCH] powerpc/corenet: Add workaround for ELBC multi-bit ECC error
Xie Shaohui-B21989
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
Bo Shen
- [U-Boot] [PATCH 05/10] common/lcd.c: cleanup use of global variables
Bo Shen
- [U-Boot] [PATCH 06/10] common/lcd.c: remove global lcd_base
Bo Shen
- [U-Boot] [PATCH] at91sam9x5: mmc: save environment as a file in FAT partition.
Bo Shen
- [U-Boot] Can I read env from RAM in uboot script?
Bo Shen
- [U-Boot] Can I read env from RAM in uboot script?
Bo Shen
- [U-Boot] [PATCH] ARM: atmel: add at91sam9g20ek_2mmc nand boot support
Bo Shen
- [U-Boot] Pull request: u-boot-arm/master
Joonyoung Shim
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Joonyoung Shim
- [U-Boot] [PATCH 0/3 V3] EXYNOS5: MAX77686 add FDT support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V3] EXYNOS5: FDT: Add compatible strings for PMIC
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V3] EXYNOS5: Add device node for PMIC
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V3] PMIC: MAX77686: Add FDT Support
Rajeshwari Shinde
- [U-Boot] [PATCH 0/3 V4] EXYNOS5: MAX77686 add FDT support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V4] EXYNOS5: FDT: Add compatible strings for PMIC
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V4] EXYNOS5: Add device node for PMIC
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V4] PMIC: MAX77686: Add FDT Support
Rajeshwari Shinde
- [U-Boot] [PATCH 0/4 V2] SMDK5250: Convert lowlevel_init.S to .c and set PMIC values
Rajeshwari Shinde
- [U-Boot] [PATCH 1/4 V2] EXYNOS: Add functions for power initialisation
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
Rajeshwari Shinde
- [U-Boot] [PATCH 3/4 V2] SMDK5250: Add PMIC voltage settings
Rajeshwari Shinde
- [U-Boot] [PATCH 4/4 V2] SMDK5250: Modify IRAM stack pointer address
Rajeshwari Shinde
- [U-Boot] [PATCH 0/3 V5] EXYNOS5: MAX77686 add FDT support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: FDT: Add compatible strings for PMIC
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V5] EXYNOS5: Add device node for PMIC
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V5] PMIC: MAX77686: Add FDT Support
Rajeshwari Shinde
- [U-Boot] [PATCH] I2C: S3C24X0: Resolve build error for VCMA9
Rajeshwari Shinde
- [U-Boot] [PATCH V2] I2C: S3C24X0: Resolve build error for VCMA9
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2] SMDK5250: Set Initial PMIC Values
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2] EXYNOS5: Add function to setup set ps hold
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2] SMDK5250: Add PMIC voltage settings
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2] EXYNOS5: Enable Gigabyte device GD25LQ and GD25Q64B
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2] EXYNOS5: Enable SPI Gigabyte device.
Rajeshwari Shinde
- [U-Boot] [PATCH 0/7] EXYNOS5: Add audio support for Snow
Rajeshwari Shinde
- [U-Boot] [PATCH 1/7] EXYNOS5: Add function to enable XXTI clock source
Rajeshwari Shinde
- [U-Boot] [PATCH 2/7] Sound: MAX98095: Add the driver for codec
Rajeshwari Shinde
- [U-Boot] [PATCH 3/7] Sound: Support for MAX98095 codec in driver
Rajeshwari Shinde
- [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095
Rajeshwari Shinde
- [U-Boot] [PATCH 5/7] EXYNOS5: FDT: Add compatible strings for MAX98095
Rajeshwari Shinde
- [U-Boot] [PATCH 6/7] EXYNOS5: Add initial DTS file for Snow.
Rajeshwari Shinde
- [U-Boot] [PATCH 7/7] EXYNOS5: Snow: Add a configuration file
Rajeshwari Shinde
- [U-Boot] [PATCH 0/3 V2] EXYNOS5: Add GPIO numbering feature
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V2] S5P: GPIO: Add generic pin numbering API's
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V2] EXYNOS5: Add gpio pin numbering feature
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V2] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2 V2] EXYNOS5: Enable Gigabyte device GD25LQ and GD25Q64B
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2] SMDK5250: Enable SPI Gigabyte device.
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V2] SMDK5250: Enable SPI Gigabyte device.
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2 V2] SMDK5250: Set Initial PMIC Values
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V2] EXYNOS5: Add function to setup set ps hold
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V2] SMDK5250: Add PMIC voltage settings
Rajeshwari Shinde
- [U-Boot] [PATCH 0/7 V2] EXYNOS5: Add audio support for Snow
Rajeshwari Shinde
- [U-Boot] [PATCH 1/7 V2] EXYNOS5: Add function to enable XXTI clock source
Rajeshwari Shinde
- [U-Boot] [PATCH 2/7 V2] Sound: MAX98095: Add the driver for codec
Rajeshwari Shinde
- [U-Boot] [PATCH 3/7 V2] Sound: Support for MAX98095 codec in driver
Rajeshwari Shinde
- [U-Boot] [PATCH 4/7 V2] EXYNOS5: GPIO to enable MAX98095
Rajeshwari Shinde
- [U-Boot] [PATCH 5/7 V2] EXYNOS5: FDT: Add compatible strings for MAX98095
Rajeshwari Shinde
- [U-Boot] [PATCH 6/7 V2] EXYNOS5: Add initial DTS file for Snow.
Rajeshwari Shinde
- [U-Boot] [PATCH 7/7 V2] EXYNOS5: Snow: Add a configuration file
Rajeshwari Shinde
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Michal Simek
- [U-Boot] [PATCH V2] drivers/block/systemace - added missing "else" in "ace_writew"
Michal Simek
- [U-Boot] serial: CONFIG_ARM_DCC_MULTI failures
Michal Simek
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI option
Michal Simek
- [U-Boot] [PATCH 2/2] serial: arm_dcc: Fix compilation warning and remove unneeded initialization
Michal Simek
- [U-Boot] [PATCH] microblaze: Add muldi3.c which contains routines for _muldi3
Michal Simek
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI option
Michal Simek
- [U-Boot] [PATCH] common: cmd_bdinfo: Fix bdinfo to show all MACs for Microblaze and ARM
Michal Simek
- [U-Boot] [PATCH] sf: spansion: Correct the first byte of idcode1 for S25FL256S part
Michal Simek
- [U-Boot] [PATCH] net: phy: Define Marvell 88e1518 phy
Michal Simek
- [U-Boot] [PATCH] spi: xilinx_spi: Perform software reset during slave setup
Michal Simek
- [U-Boot] [PATCH 1/2] sf: stmicro: Add support for N25Q64
Michal Simek
- [U-Boot] [PATCH 2/2] sf: stmicro: Add support for N25Q64A
Michal Simek
- [U-Boot] [PATCH 1/4] board: xilinx: Remove unused ancient i2c driver
Michal Simek
- [U-Boot] [PATCH 2/4] board: xilinx: Remove common folder
Michal Simek
- [U-Boot] [PATCH 3/4] common: cmd_bdinfo: Fix compilation warning for microblaze
Michal Simek
- [U-Boot] [PATCH 4/4] microblaze: Remove FSL support from generic board
Michal Simek
- [U-Boot] FAT - problem with new mkcksum implementation
Michal Simek
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI option
Michal Simek
- [U-Boot] FAT - problem with new mkcksum implementation
Michal Simek
- [U-Boot] FAT - problem with new mkcksum implementation
Michal Simek
- [U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
Michal Simek
- [U-Boot] [PATCH 1/3] sf: stmicro: Add support for N25Q32
Michal Simek
- [U-Boot] [PATCH 2/3] sf: stmicro: Add support for N25Q32A
Michal Simek
- [U-Boot] [PATCH 3/3] sf: stmicro: Add support for N25Q256A
Michal Simek
- [U-Boot] problem displaying bitmap on i.MX6
Carolyn Smith
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host configuration
Ira W. Snyder
- [U-Boot] [PATCH v4 3/3] ARM: OMAP5: redefine arm_setup_identity_mapping
R Sricharan
- [U-Boot] [RFC PATCH 1/2] ARM: cache: Introduce weak dram_bank_setup function
R Sricharan
- [U-Boot] [RFC PATCH 2/2] ARM: mmu: Set domain permissions to client access
R Sricharan
- [U-Boot] [RFC PATCH 1/2] ARM: cache: Introduce weak dram_bank_setup function
R Sricharan
- [U-Boot] [PATCH v4 3/3] ARM: OMAP5: redefine arm_setup_identity_mapping
R Sricharan
- [U-Boot] [PATCH 0/2] ARM: mmu: Set domain permissions to client access
R Sricharan
- [U-Boot] [PATCH 1/2] ARM: mmu: Introduce weak dram_bank_setup function
R Sricharan
- [U-Boot] [PATCH 1/2] ARM: mmu: Introduce weak dram_bank_setup function
R Sricharan
- [U-Boot] [PATCH 2/2] ARM: mmu: Set domain permissions to client access
R Sricharan
- [U-Boot] [PATCH v2 01/10] arm: move flush_dcache_all() to just before disable cache
R Sricharan
- [U-Boot] [PATCH 0/7] ARM: OMAP4+: Cleanup clocks, control and emif code
R Sricharan
- [U-Boot] [PATCH 1/7] ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register
R Sricharan
- [U-Boot] [PATCH 2/7] ARM: OMAP4+: Change the PRCM structure prototype common for all Socs
R Sricharan
- [U-Boot] [PATCH 3/7] ARM: OMAP4+: Cleanup the clocks layer
R Sricharan
- [U-Boot] [PATCH 4/7] ARM: OMAP4+: Clean up the pmic code
R Sricharan
- [U-Boot] [PATCH 5/7] ARM: OMAP4+: Cleanup emif specific files
R Sricharan
- [U-Boot] [PATCH 6/7] ARM: OMAP4+: Make control module register structure generic
R Sricharan
- [U-Boot] [PATCH 7/7] ARM: OMAP5: Clean up iosettings code
R Sricharan
- [U-Boot] [PATCH 0/5] ARM: OMAP5: Add support for OMAP543x ES2.0 Socs
R Sricharan
- [U-Boot] [PATCH 1/5] ARM: OMAP5: Add silicon id support for ES2.0 revision.
R Sricharan
- [U-Boot] [PATCH 2/5] ARM: OMAP5: clock: Add the prcm register changes required for ES2.0
R Sricharan
- [U-Boot] [PATCH 3/5] ARM: OMAP5: clocks: Add OPP settings required for OMAP543X ES2.0 soc
R Sricharan
- [U-Boot] [PATCH 4/5] ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs
R Sricharan
- [U-Boot] [PATCH 5/5] ARM: OMAP5: srcomp: enable slew rate compensation cells after powerup
R Sricharan
- [U-Boot] USB driver on MPC8555E controller on a Non-RTOS project
Srijith
- [U-Boot] [PATCH 05/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
Lucas Stach
- [U-Boot] [PATCH] tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
Lucas Stach
- [U-Boot] [PATCH] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Lucas Stach
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
Lucas Stach
- [U-Boot] [PATCH] tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
Lucas Stach
- [U-Boot] [PATCH 00/11] tablebased pinmux for Tegra20
Lucas Stach
- [U-Boot] [PATCH 01/11] tegra: introduce config option to do table based pinmux
Lucas Stach
- [U-Boot] [PATCH 02/11] tegra20: add entry point and helper for tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 03/11] tegra20: switch over colibri_t20 board to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 04/11] tegra20: switch over tamonten platform to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 05/11] tegra20: switch over harmony board to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 07/11] tegra20: switch over whistler board to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 08/11] tegra20: switch over paz00 board to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 09/11] tegra20: switch over trimslice board to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 10/11] tegra20: remove old pinmux setup
Lucas Stach
- [U-Boot] [PATCH 11/11] tegra20: remove funcmux
Lucas Stach
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
Lucas Stach
- [U-Boot] [PATCH v2 1/7] tegra: usb: set USB_PORTS_MAX to correct value
Lucas Stach
- [U-Boot] [PATCH v2 2/7] tegra: usb: make controller init functions more self contained
Lucas Stach
- [U-Boot] [PATCH v2 3/7] tegra: usb: remove unneeded function parameter
Lucas Stach
- [U-Boot] [PATCH v2 4/7] tegra: usb: move controller init into start_port
Lucas Stach
- [U-Boot] [PATCH v2 5/7] tegra: usb: various small cleanups
Lucas Stach
- [U-Boot] [PATCH v2 6/7] tegra: usb: move implementation into right directory
Lucas Stach
- [U-Boot] [PATCH v2 7/7] tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
Lucas Stach
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
Lucas Stach
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 04/11] tegra20: switch over tamonten platform to use tablebased pinmux
Lucas Stach
- [U-Boot] [PATCH 10/11] tegra20: remove old pinmux setup
Lucas Stach
- [U-Boot] CONFIG_DELAY_ENVIRONMENT usage
Lucas Stach
- [U-Boot] Update OMAP5 "unmap first page" patch series
Vincent Stehlé
- [U-Boot] [PATCH v4 1/3] ARM: cache: declare set_section_dcache
Vincent Stehlé
- [U-Boot] [PATCH v4 2/3] ARM: cache: introduce weak arm_setup_identity_mapping
Vincent Stehlé
- [U-Boot] [PATCH v4 3/3] ARM: OMAP5: redefine arm_setup_identity_mapping
Vincent Stehlé
- [U-Boot] [PATCH v4 3/3] ARM: OMAP5: redefine arm_setup_identity_mapping
Vincent Stehlé
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
John Stile
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
John Stile
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
John Stile
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
John Stile
- [U-Boot] setting the environment address
John Stile
- [U-Boot] designing a firmware update mechanism
John Stile
- [U-Boot] Can I read env from RAM in uboot script?
John Stile
- [U-Boot] Can I read env from RAM in uboot script?
John Stile
- [U-Boot] Can I read env from RAM in uboot script?
John Stile
- [U-Boot] Can I read env from RAM in uboot script?
John Stile
- [U-Boot] call env print from uboot environment
John Stile
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
Steve Strobel
- [U-Boot] [PATCH 1/7] powerpc/mpc8xxx: Enable entering DDR debugging by key press
York Sun
- [U-Boot] [PATCH 2/7] Move DDR command parsing to separate function
York Sun
- [U-Boot] [PATCH 3/7] Fix data stage name matching issue
York Sun
- [U-Boot] [PATCH 4/7] Add copy command to FSL DDR interactive
York Sun
- [U-Boot] [PATCH 5/7] README.fsl-ddr typos and update to reflect hotkey
York Sun
- [U-Boot] [PATCH 6/7] getenv_f() env variable exist w/o needing a buffer
York Sun
- [U-Boot] [PATCH 7/7] powerpc/mpc8xxx: FSL DDR debugger auto run of stored commands
York Sun
- [U-Boot] [PATCH] Introduce a global bool type
York Sun
- [U-Boot] [Patch v2] Introduce a global bool type
York Sun
- [U-Boot] [PATCH 1/7] powerpc/mpc8xxx: Enable entering DDR debugging by key press
York Sun
- [U-Boot] [PATCH] Introduce a global bool type
York Sun
- [U-Boot] [PATCH] Introduce a global bool type
York Sun
- [U-Boot] [PATCH][v4] powerpc/mpc8xxxx: FSL DDR debugger auto run of stored commands
York Sun
- [U-Boot] [PATCH][v4] powerpc/mpc8xxxx: FSL DDR debugger auto run of stored commands
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [RFC Patch v4] Consolidate bool type
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [RFC Patch v5] Consolidate bool type
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
York Sun
- [U-Boot] [RFC Patch v5] Consolidate bool type
York Sun
- [U-Boot] [RFC Patch v6] Consolidate bool type
York Sun
- [U-Boot] [RFC Patch v6] Consolidate bool type
York Sun
- [U-Boot] [RFC Patch v6] Consolidate bool type
York Sun
- [U-Boot] [RFC Patch v6] Consolidate bool type
York Sun
- [U-Boot] [Patch v7] Consolidate bool type
York Sun
- [U-Boot] [u-boot-release] [PATCH 6/7] getenv_f() env variable exist w/o needing a buffer
Timur Tabi
- [U-Boot] [u-boot-release] [PATCH] Introduce a global bool type
Timur Tabi
- [U-Boot] [PATCH] Introduce a global bool type
Timur Tabi
- [U-Boot] [PATCH] Introduce a global bool type
Timur Tabi
- [U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Timur Tabi
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
Jagan Teki
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions
Jagan Teki
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
Jagan Teki
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
Jagan Teki
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
Jagan Teki
- [U-Boot] Help : Marvell SDIO/MMC driver for Sheevaplug
Jagan Teki
- [U-Boot] [U-Boot,v2 6/6] sf: Set QUAD enable bit support
Jagan Teki
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v3 2/2] sf: Add config register reading support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 1/2] sf: stmicro: Add support for N25Q64
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT] help on mmc driver
Jagannadha Sutradharudu Teki
- [U-Boot] [U-BOOT] help on mmc driver
Jagannadha Sutradharudu Teki
- [U-Boot] MMC - Error detected in status(0x208100)!
Jagannadha Sutradharudu Teki
- [U-Boot] MMC - Error detected in status(0x208100)!
Jagannadha Sutradharudu Teki
- [U-Boot] Googlers please reply: commiters in U-Boot
Bernie Thompson
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH] mx6qsabresd: Fix mmc boot by making USDHC3 be 'dev 0'
Benoît Thébaudeau
- [U-Boot] [STATUS] v2013.01 released
Benoît Thébaudeau
- [U-Boot] [PATCH 1/6] imx: mx6q DDR3 init: Fix tMRD
Benoît Thébaudeau
- [U-Boot] [PATCH 2/6] imx: mx6q DDR3 init: Fix tXPR
Benoît Thébaudeau
- [U-Boot] [PATCH 3/6] imx: mx6q DDR3 init: Fix SDE_to_RST
Benoît Thébaudeau
- [U-Boot] [PATCH 4/6] imx: mx6q DDR3 init: Fix RST_to_CKE
Benoît Thébaudeau
- [U-Boot] [PATCH 5/6] imx: mx6q DDR3 init: Fix MR0.PPD
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] imx: mx6q DDR3 init: Benefit from available CL = 7
Benoît Thébaudeau
- [U-Boot] [PATCH] nand/mxc: set host->page_addr for NAND_CMD_READOOB
Benoît Thébaudeau
- [U-Boot] [PATCH] Introduce a global bool type
Tabi Timur-B04825
- [U-Boot] [PATCH] powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'.
Tabi Timur-B04825
- [U-Boot] [PATCH] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
Tabi Timur-B04825
- [U-Boot] [PATCH] powerpc/p5040: add serdes2 memory map register define
Tabi Timur-B04825
- [U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Tabi Timur-B04825
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Joakim Tjernlund
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Joakim Tjernlund
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Joakim Tjernlund
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
Joakim Tjernlund
- [U-Boot] [RFC] powerpc/lib: unsafe register handling in wait_ticks
Joakim Tjernlund
- [U-Boot] [RFC] powerpc/lib: unsafe register handling in wait_ticks
Joakim Tjernlund
- [U-Boot] [PATCH] powerpc/lib: fix unsafe register handling in wait_ticks
Joakim Tjernlund
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Marek Vasut
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
Marek Vasut
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Marek Vasut
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Marek Vasut
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Marek Vasut
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Marek Vasut
- [U-Boot] [RFC PATCH 03/44] mkimage: Move ARRAY_SIZE to header file
Marek Vasut
- [U-Boot] [RFC PATCH 05/44] image: Move timestamp #ifdefs to header file
Marek Vasut
- [U-Boot] [RFC PATCH 06/44] image: Export fit_check_ramdisk()
Marek Vasut
- [U-Boot] [RFC PATCH 07/44] image: Split FIT code into new image-fit.c
Marek Vasut
- [U-Boot] [RFC PATCH 08/44] image: Move HOSTCC image code to tools/
Marek Vasut
- [U-Boot] [RFC PATCH 09/44] image: Split hash node processing into its own function
Marek Vasut
- [U-Boot] [RFC PATCH 10/44] image: Convert fit_image_hash_set_value() to static, and rename
Marek Vasut
- [U-Boot] [RFC PATCH 11/44] image: Rename fit_image_check_hashes() to fit_image_verify()
Marek Vasut
- [U-Boot] [RFC PATCH 12/44] image: Move hash checking into its own functions
Marek Vasut
- [U-Boot] [RFC PATCH 13/44] image: Move error! string to common place
Marek Vasut
- [U-Boot] [RFC PATCH 14/44] image: Export fit_conf_get_prop_node()
Marek Vasut
- [U-Boot] [RFC PATCH 16/44] image: Rename hash printing to fit_image_print_verification_data()
Marek Vasut
- [U-Boot] [RFC PATCH 30/44] sandbox: image: Add support for booting images in sandbox
Marek Vasut
- [U-Boot] [RFC PATCH 32/44] image: Support signing of images
Marek Vasut
- [U-Boot] [RFC PATCH 33/44] image: Verify signatures in FIT images
Marek Vasut
- [U-Boot] [RFC PATCH 34/44] image: Add RSA support for image signing
Marek Vasut
- [U-Boot] [RFC PATCH 35/44] mkimage: Put FIT loading in function and tidy error handling
Marek Vasut
- [U-Boot] [RFC PATCH 36/44] mkimage: Add -k option to specify key directory
Marek Vasut
- [U-Boot] [RFC PATCH 37/44] mkimage: Add -K to write public keys to an FDT blob
Marek Vasut
- [U-Boot] [RFC PATCH 38/44] mkimage: Add -F option to modify an existing .fit file
Marek Vasut
- [U-Boot] [RFC PATCH 39/44] mkimage: Add -c option to specify a comment for key signing
Marek Vasut
- [U-Boot] [RFC PATCH 40/44] mkimage: Add -r option to specify keys that must be verified
Marek Vasut
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Marek Vasut
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH v2] SMDK5250: Enable VBus for USB 2.0 controller
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH v2] SMDK5250: Enable VBus for USB 2.0 controller
Marek Vasut
- [U-Boot] [PATCH v3 1/3] EHCI: Exynos: Add fdt support
Marek Vasut
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Marek Vasut
- [U-Boot] [PATCH v3 3/3] EXYNOS5: FDT: Add compatible strings for USB
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Marek Vasut
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Marek Vasut
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
Marek Vasut
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Marek Vasut
- [U-Boot] [PATCH] mxs: Use __weak annotation to simplify code
Marek Vasut
- [U-Boot] [PATCH] common: env_mmc: Use __weak annotation to simplify code
Marek Vasut
- [U-Boot] [PATCH V2] fs: fat: Fix mkcksum() function parameters
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: exynos: Enable non-dt path
Marek Vasut
- [U-Boot] [RFC PATCH 01/22] sandbox: Allow -c argument to provide a command list
Marek Vasut
- [U-Boot] [RFC PATCH 02/22] sandbox: Support 'source' command
Marek Vasut
- [U-Boot] [RFC PATCH 03/22] fs: Add support for saving data to filesystems
Marek Vasut
- [U-Boot] [RFC PATCH 04/22] sandbox: fs: Add support for saving files to host filesystem
Marek Vasut
- [U-Boot] [RFC PATCH 07/22] arm: Refactor bootm to reduce #ifdefs
Marek Vasut
- [U-Boot] [RFC PATCH 09/22] powerpc: Use image_setup_linux() instead of local code
Marek Vasut
- [U-Boot] [RFC PATCH 08/22] arm: Use image_setup_linux() instead of local code
Marek Vasut
- [U-Boot] [RFC PATCH 10/22] m68k: Use image_setup_linux() instead of local code
Marek Vasut
- [U-Boot] [PATCH 01/18] mxs: mmc: Drop unused members from struct mxsmmc_priv
Marek Vasut
- [U-Boot] [PATCH 02/18] mxs: ssp: Pull out the SSP bus to regs conversion
Marek Vasut
- [U-Boot] [PATCH 03/18] mxs: clock: Use 'mxs' prefix for methods
Marek Vasut
- [U-Boot] [PATCH 04/18] mx23: Add register base addresses
Marek Vasut
- [U-Boot] [PATCH 05/18] mx23: Add iomux-mx23.h
Marek Vasut
- [U-Boot] [PATCH 06/18] mx23: Add POWER and CLKCTRL register definitions
Marek Vasut
- [U-Boot] [PATCH 07/18] mx23: ssp: Fix ssp-regs.h for MX23
Marek Vasut
- [U-Boot] [PATCH 08/18] mx23: Add support on print_cpuinfo()
Marek Vasut
- [U-Boot] [PATCH 09/18] mx23: Add boot mode description
Marek Vasut
- [U-Boot] [PATCH 10/18] mx23: SPL: Add boot mode support
Marek Vasut
- [U-Boot] [PATCH 11/18] mx23: SPL: Initialize DDR at 133MHz
Marek Vasut
- [U-Boot] [PATCH 12/18] mx23: config: Enable building of u-boot.sb binary
Marek Vasut
- [U-Boot] [PATCH 13/18] mx23: config: Enable mxsboot tool for i.MX23 based boards
Marek Vasut
- [U-Boot] [PATCH 14/18] mmc: Limit the number of used SSP ports on MX23
Marek Vasut
- [U-Boot] [PATCH 15/18] mxs: Add MX23 quirks into the clock code
Marek Vasut
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
Marek Vasut
- [U-Boot] [PATCH 17/18] mxs: Add function to ungate the power block on MX23
Marek Vasut
- [U-Boot] [PATCH 18/18] mxs: Fix the memory init for MX23
Marek Vasut
- [U-Boot] BDI3000 - Unprotect flash sectors
Marek Vasut
- [U-Boot] [STATUS] v2013.01-rc3 out
Marek Vasut
- [U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
Marek Vasut
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
Marek Vasut
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
Marek Vasut
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
Marek Vasut
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
Marek Vasut
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
Marek Vasut
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
Marek Vasut
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
Marek Vasut
- [U-Boot] [PATCH 16/18 V3] mxs: Add MX23 olinuxino board support
Marek Vasut
- [U-Boot] [PATCH 3/3] pxa: Save lr register in relocate_code function
Marek Vasut
- [U-Boot] [PATCH 2/3] h2200: Add board reset support
Marek Vasut
- [U-Boot] [PATCH 04/10] lcd, pxafb: move the pxafb to drivers/video
Marek Vasut
- [U-Boot] [PATCH 2/3] h2200: Add board reset support
Marek Vasut
- [U-Boot] [PATCH] fix linker generated lists on non-C locales
Marek Vasut
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
Marek Vasut
- [U-Boot] [PATCH 15/18 V2] mxs: Add MX23 quirks into the clock code
Marek Vasut
- [U-Boot] [PATCH] mxs: Boost the memory power supply
Marek Vasut
- [U-Boot] [PATCH V2] mxs: Boost the memory power supply
Marek Vasut
- [U-Boot] [PATCH] mxs: Boost the memory power supply
Marek Vasut
- [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode
Marek Vasut
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
Marek Vasut
- [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support
Marek Vasut
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection
Marek Vasut
- [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
Marek Vasut
- [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and timeout in iMX23
Marek Vasut
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Marek Vasut
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Marek Vasut
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection
Marek Vasut
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
Marek Vasut
- [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode
Marek Vasut
- [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and timeout in iMX23
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
Marek Vasut
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
Marek Vasut
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
Marek Vasut
- [U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23
Marek Vasut
- [U-Boot] [PATCH 2/6] mxs: ssp: Add SSP registers map for MX23
Marek Vasut
- [U-Boot] [PATCH 3/6] mxs: mmc: Fix MMC reset on iMX23
Marek Vasut
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect implementation
Marek Vasut
- [U-Boot] [PATCH 5/6] mxs: mmc: Fix the MMC driver for MX23
Marek Vasut
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
Marek Vasut
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
Marek Vasut
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Marek Vasut
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
Marek Vasut
- [U-Boot] [PATCH v3 1/2] mx23_olinuxino: Add default environment
Marek Vasut
- [U-Boot] [PATCH v5 1/2] mx23_olinuxino: Add default environment
Marek Vasut
- [U-Boot] [PATCH v5 1/2] mx23_olinuxino: Add default environment
Marek Vasut
- [U-Boot] [PATCH 1/4] usb:composite: USB Mass Storage - storage_common.c from Linux kernel
Marek Vasut
- [U-Boot] [PATCH 2/4] usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernel
Marek Vasut
- [U-Boot] [PATCH 3/4] usb:gadget: USB Mass Storage Gadget support
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Marek Vasut
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
Marek Vasut
- [U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23
Marek Vasut
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect implementation
Marek Vasut
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect implementation
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Marek Vasut
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect implementation
Marek Vasut
- [U-Boot] Want to study U-Boot code
Marek Vasut
- [U-Boot] Want to study U-Boot code
Marek Vasut
- [U-Boot] [PATCH v2] integrator: pass a Device Tree by default
Marek Vasut
- [U-Boot] [PATCH 1/4] usb:composite: USB Mass Storage - storage_common.c from Linux kernel
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Marek Vasut
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect autoboot timeout
Marek Vasut
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
Marek Vasut
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI option
Marek Vasut
- [U-Boot] [PATCH 2/2] serial: arm_dcc: Fix compilation warning and remove unneeded initialization
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Marek Vasut
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect autoboot timeout
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
Marek Vasut
- [U-Boot] [PATCH 1/3] mxs: Use SoC agnostic configuration option for power switch setting
Marek Vasut
- [U-Boot] [PATCH 2/3] mx23: Enable bit 24 of HW_DRAM_CTL08 as did in imx-bootlets
Marek Vasut
- [U-Boot] Possible MMC subsystem bug
Marek Vasut
- [U-Boot] Possible MMC subsystem bug
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Marek Vasut
- [U-Boot] [PATCH 2/2] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
Marek Vasut
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
Marek Vasut
- [U-Boot] [PATCH 3/3] mx23evk: Turn on caches
Marek Vasut
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
Marek Vasut
- [U-Boot] FAT - problem with new mkcksum implementation
Marek Vasut
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
Marek Vasut
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
Marek Vasut
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
Marek Vasut
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
Marek Vasut
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
Marek Vasut
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
Marek Vasut
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect autoboot timeout
Marek Vasut
- [U-Boot] [PATCH 3/4] mx23_olinuxino: Enable USB support
Marek Vasut
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Marek Vasut
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Marek Vasut
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
Marek Vasut
- [U-Boot] [PATCH v2 4/4] mx23_olinuxino: Add ethernet support
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Marek Vasut
- [U-Boot] [PATCH] mxs: Reset the EMI block on mx23
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
Marek Vasut
- [U-Boot] [PATCH v3 1/3] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT
Marek Vasut
- [U-Boot] MX23 patches
Marek Vasut
- [U-Boot] MX23 patches
Marek Vasut
- [U-Boot] [PATCH 02/10] mx23: Document the tRAS lockout setting in memory initialization
Marek Vasut
- [U-Boot] [PATCH 01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT
Marek Vasut
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Marek Vasut
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] [PATCH 07/10] usb: mxs: Disable USB Port 1 for i.MX23
Marek Vasut
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
Marek Vasut
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Marek Vasut
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
Marek Vasut
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
Marek Vasut
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
Marek Vasut
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
Marek Vasut
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
Marek Vasut
- [U-Boot] vfat: Fix mkcksum argument sizes
Marek Vasut
- [U-Boot] U-Boot Graphics Library?
James W.
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] [PATCH 00/15] updates for km83xx boards
Prafulla Wadaskar
- [U-Boot] [PATCH] Introduce a global bool type
Bernhard Walle
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
Linus Walleij
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
Linus Walleij
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
Linus Walleij
- [U-Boot] [PATCH v2] integrator: pass a Device Tree by default
Linus Walleij
- [U-Boot] [PATCH 1/3] Tegra30: clocks: Fix clock tables for I2C and other periphs
Stephen Warren
- [U-Boot] [PATCH 2/3] Tegra30: fdt: Update DT files with I2C info for T30/Cardhu
Stephen Warren
- [U-Boot] [PATCH 3/3] Tegra30: I2C: Enable I2C driver on Cardhu
Stephen Warren
- [U-Boot] [PATCH 2/3] Tegra30: fdt: Update DT files with I2C info for T30/Cardhu
Stephen Warren
- [U-Boot] Selecting from multiple device trees at runtime
Stephen Warren
- [U-Boot] Selecting from multiple device trees at runtime
Stephen Warren
- [U-Boot] Selecting from multiple device trees at runtime
Stephen Warren
- [U-Boot] Selecting from multiple device trees at runtime
Stephen Warren
- [U-Boot] [PATCH] tegra30: fix UART2 pinmux table entry
Stephen Warren
- [U-Boot] [PATCH] fdt: fix dts preprocessor options
Stephen Warren
- [U-Boot] [PATCH] tegra30: fix UART2 pinmux table entry
Stephen Warren
- [U-Boot] [PATCH] tegra30: cardhu: fix UART2 pinmux settings
Stephen Warren
- [U-Boot] [PATCH] tegra: remove IRDA pinmux synonym
Stephen Warren
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
Stephen Warren
- [U-Boot] [PATCH 2/7] tegra: spi: add fdt support to tegra SPI SFLASH driver
Stephen Warren
- [U-Boot] [PATCH 4/7] tegra30: fdt: add SPI SLINK nodes
Stephen Warren
- [U-Boot] [PATCH 6/7] tegra: add SPI SLINK driver
Stephen Warren
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
Stephen Warren
- [U-Boot] [PATCH v2 3/9] tegra20: fdt: add SPI SFLASH node
Stephen Warren
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
Stephen Warren
- [U-Boot] [PATCH v2 0/9] tegra: SPI drivers
Stephen Warren
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 1/7] ARM: bcm2835: add mailbox driver
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2/7] ARM: rpi_b: use bcm2835 mbox driver to get memory size
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 3/7] lcd: calculate line_length after lcd_ctrl_init()
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 4/7] ARM: rpi_b: disable rpi_b dcache explicitly
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 5/7] video: add a driver for the bcm2835
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 6/7] mmc: add bcm2835 driver
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 7/7] ARM: rpi_b: enable SD controller, add related env/cmds
Stephen Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
Stephen Warren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
Stephen Warren
- [U-Boot] [PATCH 4/7] Tegra114: Add common CPU (shared) files
Stephen Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
Stephen Warren
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Stephen Warren
- [U-Boot] [PATCH v3 7/7] tegra: cardhu: config: enable SPI
Stephen Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
Stephen Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
Stephen Warren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
Stephen Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
Stephen Warren
- [U-Boot] [PATCH] Tegra: T20: Remove unused 'SLOW' SoC ID and PLLX table entry
Stephen Warren
- [U-Boot] [PATCH v2 1/7] Tegra114: Add arch-tegra114 include files
Stephen Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
Stephen Warren
- [U-Boot] [PATCH v2 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Stephen Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
Stephen Warren
- [U-Boot] [PATCH 1/2] tegra: don't hard-code LCD into default TEGRA_DEVICE_SETTINGS
Stephen Warren
- [U-Boot] [PATCH 2/2] tegra: rename FUNCMUX_UART2_UARTB
Stephen Warren
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
Stephen Warren
- [U-Boot] [PATCH] tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
Stephen Warren
- [U-Boot] [PATCH v2 1/7] Tegra114: Add arch-tegra114 include files
Stephen Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
Stephen Warren
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
Stephen Warren
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
Stephen Warren
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
Stephen Warren
- [U-Boot] [PATCH] Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.c
Stephen Warren
- [U-Boot] [PATCH 04/11] tegra20: switch over tamonten platform to use tablebased pinmux
Stephen Warren
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Stephen Warren
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Stephen Warren
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
Stephen Warren
- [U-Boot] [PATCH 10/11] tegra20: remove old pinmux setup
Stephen Warren
- [U-Boot] [PATCH 10/11] tegra20: remove old pinmux setup
Stephen Warren
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
Stephen Warren
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
Stephen Warren
- [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files
Stephen Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Stephen Warren
- [U-Boot] [PATCH 2/2] Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
Stephen Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Stephen Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Stephen Warren
- [U-Boot] [PATCH v4 1/7] tegra20: fdt: add SPI SFLASH node
Stephen Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Stephen Warren
- [U-Boot] [PATCH v2] MAKEALL: add support for per architecture toolchains
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 1/7] ARM: bcm2835: add mailbox driver
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 2/7] ARM: rpi_b: use bcm2835 mbox driver to get memory size
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 3/7] lcd: calculate line_length after lcd_ctrl_init()
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 4/7] ARM: rpi_b: disable rpi_b dcache explicitly
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 5/7] video: add a driver for the bcm2835
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 6/7] mmc: add bcm2835 driver
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 7/7] ARM: rpi_b: enable SD controller, add related env/cmds
Stephen Warren
- [U-Boot] [PATCH 1/3] Tegra30: clocks: Fix clock tables for I2C and other periphs
Tom Warren
- [U-Boot] [PATCH 2/3] Tegra30: fdt: Update DT files with I2C info for T30/Cardhu
Tom Warren
- [U-Boot] [PATCH 0/7] Add support for NVIDIA Tegra114 SoC
Tom Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
Tom Warren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH 3/7] Tegra114: Add CPU (armv7) files
Tom Warren
- [U-Boot] [PATCH 4/7] Tegra114: Add common CPU (shared) files
Tom Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
Tom Warren
- [U-Boot] [PATCH 6/7] Tegra114: Add generic Tegra114 build support
Tom Warren
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Tom Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
Tom Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
Tom Warren
- [U-Boot] [PATCH 4/7] Tegra114: Add common CPU (shared) files
Tom Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
Tom Warren
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Tom Warren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
Tom Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
Tom Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] [PATCH] Tegra: T20: Remove unused 'SLOW' SoC ID and PLLX table entry
Tom Warren
- [U-Boot] [PATCH v2 0/7] Add support for NVIDIA Tegra114 SoC
Tom Warren
- [U-Boot] [PATCH v2 1/7] Tegra114: Add arch-tegra114 include files
Tom Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH v2 3/7] Tegra114: Add CPU (armv7) files
Tom Warren
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
Tom Warren
- [U-Boot] [PATCH v2 5/7] Tegra114: Dalmore: Add DT files
Tom Warren
- [U-Boot] [PATCH v2 6/7] Tegra114: Add generic Tegra114 build support
Tom Warren
- [U-Boot] [PATCH v2 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Tom Warren
- [U-Boot] [PATCH v2 1/7] Tegra114: Add arch-tegra114 include files
Tom Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Tom Warren
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
Tom Warren
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
Tom Warren
- [U-Boot] [PATCH] Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.c
Tom Warren
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
Tom Warren
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
Tom Warren
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
Tom Warren
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
Tom Warren
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
Tom Warren
- [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files
Tom Warren
- [U-Boot] [PATCH v3 2/7] Tegra114: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH v3 3/7] Tegra114: Add CPU (armv7) files
Tom Warren
- [U-Boot] [PATCH v3 4/7] Tegra114: Add common CPU (shared) files
Tom Warren
- [U-Boot] [PATCH v3 5/7] Tegra114: Dalmore: Add DT files
Tom Warren
- [U-Boot] [PATCH v3 6/7] Tegra114: Add generic Tegra114 build support
Tom Warren
- [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
Tom Warren
- [U-Boot] [PATCH v3 0/7] Add support for NVIDIA Tegra114 SoC
Tom Warren
- [U-Boot] [PATCH 0/2] Add I2C driver for Tegra114 Dalmore
Tom Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Tom Warren
- [U-Boot] [PATCH 2/2] Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
Tom Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Tom Warren
- [U-Boot] [PATCH 2/2] Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
Tom Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Tom Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
Tom Warren
- [U-Boot] e1000 : Correct Rx Threshold Granularity
Darcy Watkins
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
Piotr Wilczek
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
Piotr Wilczek
- [U-Boot] [PATCH 0/4] usb:gadget: USB Mass Storage Gadget
Piotr Wilczek
- [U-Boot] =?y?q?=5BPATCH=201/4=5D=20usb=3Acomposite=3A=20USB=20Mass=20Storage=20-=20storage=5Fcommon=2Ec=20from=20Linux=20kernel?=
Piotr Wilczek
- [U-Boot] [PATCH 2/4] usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernel
Piotr Wilczek
- [U-Boot] [PATCH 3/4] usb:gadget: USB Mass Storage Gadget support
Piotr Wilczek
- [U-Boot] [PATCH 4/4] arm:trats: Use new ums command
Piotr Wilczek
- [U-Boot] [PATCH 3/4] usb:gadget: USB Mass Storage Gadget support
Piotr Wilczek
- [U-Boot] [PATCH 2/4] usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernel
Piotr Wilczek
- [U-Boot] [PATCH 1/4] usb:composite: USB Mass Storage - storage_common.c from Linux kernel
Piotr Wilczek
- [U-Boot] [PATCH 0/2] gpt: fix partition size limit
Piotr Wilczek
- [U-Boot] [PATCH 1/2] vsprintf: add ustrtoll function
Piotr Wilczek
- [U-Boot] [PATCH 2/2] gpt: fix partion size limit
Piotr Wilczek
- [U-Boot] [PATCH 1/4] usb:composite: USB Mass Storage - storage_common.c from Linux kernel
Piotr Wilczek
- [U-Boot] [PATCH V2] fs: fat: Fix mkcksum() function parameters
Aaron Williams
- [U-Boot] [PATCH] am335x: NAND, add BCH16 and 4k page size support
Jordy van Wolferen
- [U-Boot] [PATCH] am335x: NAND: add BCH16 and 4k page size support
Jordy van Wolferen
- [U-Boot] [PATCH][RFC] MTD resync from Linux-3.8-rc2+ (master)
Scott Wood
- [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT value
Scott Wood
- [U-Boot] [RFC][PULL-REQ] MTD update
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
Scott Wood
- [U-Boot] [PATCH] Introduce a global bool type
Scott Wood
- [U-Boot] [PATCH] Introduce a global bool type
Scott Wood
- [U-Boot] NOR NAND Interference question
Scott Wood
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Scott Wood
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
Scott Wood
- [U-Boot] MPC8555 pci issue
Scott Wood
- [U-Boot] [PATCH] Introduce a global bool type
Scott Wood
- [U-Boot] [PATCH] powerpc/85xx: select -mcpu=8540 to match -Wa, e500
Scott Wood
- [U-Boot] [PATCH] powerpc: fix 8xx and 82xx type-punning warnings with GCC 4.7
Scott Wood
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
Scott Wood
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
Scott Wood
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
Scott Wood
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
Scott Wood
- [U-Boot] NAND flash - bad blocks
Scott Wood
- [U-Boot] NAND flash - bad blocks
Scott Wood
- [U-Boot] NAND flash - bad blocks
Scott Wood
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Scott Wood
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Scott Wood
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
Scott Wood
- [U-Boot] [PATCH 09/15] kmeter1_nand: allow usage of NAND_ECC_SOFT_BCH
Scott Wood
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Scott Wood
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Scott Wood
- [U-Boot] cc-list modified?
Scott Wood
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Scott Wood
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Scott Wood
- [U-Boot] [PATCH v2] powerpc/85xx: select -mcpu=8540 to match -Wa, e500
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx: add support for MMUv2 page sizes
Scott Wood
- [U-Boot] [PATCH] serial/ns16550: don't generate functions for undefined ports
Scott Wood
- [U-Boot] [PATCH v2] powerpc/mpc85xx: add support for MMUv2 page sizes
Scott Wood
- [U-Boot] [PATCH] Introduce a global bool type
Scott Wood
- [U-Boot] cc-list modified?
Scott Wood
- [U-Boot] [PATCH] Introduce a global bool type
Scott Wood
- [U-Boot] [Patch v3] Consolidate bool type
Scott Wood
- [U-Boot] [Patch v3] Consolidate bool type
Scott Wood
- [U-Boot] [Patch v3] Consolidate bool type
Scott Wood
- [U-Boot] [Patch v3] Consolidate bool type
Scott Wood
- [U-Boot] [RFC Patch v5] Consolidate bool type
Scott Wood
- [U-Boot] [PATCH v2] powerpc/85xx: select -mcpu=8540 to match -Wa, e500
Scott Wood
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
Scott Wood
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
Scott Wood
- [U-Boot] [PATCH] am335x: NAND: add BCH16 and 4k page size support
Scott Wood
- [U-Boot] [PATCH] powerpc/corenet: Add workaround for ELBC multi-bit ECC error
Scott Wood
- [U-Boot] [PATCH] nand/mxc: set host->page_addr for NAND_CMD_READOOB
Scott Wood
- [U-Boot] [PATCH] nand/mxc: set host->page_addr for NAND_CMD_READOOB
Scott Wood
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
Josh Wu
- [U-Boot] [PATCH] at91sam9x5: mmc: save environment as a file in FAT partition.
Josh Wu
- [U-Boot] Want to study U-Boot code
Woody Wu
- [U-Boot] Want to study U-Boot code
Woody Wu
- [U-Boot] s3c2416 support in u-boot
Woody Wu
- [U-Boot] Want to study U-Boot code
Woody Wu
- [U-Boot] Want to study U-Boot code
Woody Wu
- [U-Boot] Want to study U-Boot code
Woody Wu
- [U-Boot] smdk2416 support?
Woody Wu
- [U-Boot] smdk2416 support?
Woody Wu
- [U-Boot] smdk2416 support?
Woody Wu
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
Shaohui Xie
- [U-Boot] [PATCH 2/3] powerpc/p5040: enable SD boot support
Shaohui Xie
- [U-Boot] [PATCH 3/3] powerpc/p5040: enable SPI boot support
Shaohui Xie
- [U-Boot] [PATCH] powerpc/p5040: enable PBL tool support
Shaohui Xie
- [U-Boot] [PATCH][v2] powerpc/p5040: enable NAND/SD/SPI boot support
Shaohui Xie
- [U-Boot] [PATCH] powerpc/p2041: fix serdes reference clock frequency for PC board
Shaohui Xie
- [U-Boot] [PATCH] powerpc/85xx: add missing QMAN frequency calculation
Shaohui Xie
- [U-Boot] [PATCH][v2] powerpc/p2041: fix serdes reference clock frequency display for PC board
Shaohui Xie
- [U-Boot] [PATCH] powerpc/corenet: Add workaround for ELBC multi-bit ECC error
Shaohui Xie
- [U-Boot] [PATCH] powerpc/p5040: fix mdio mux for 10G port
Shaohui Xie
- [U-Boot] [PATCH] powerpc/corenet: set USB2 default mode to 'device' for (super)hydra boards
Shaohui Xie
- [U-Boot] [PATCH 1/2] powerpc/t4240qds: Fix SPI flash type
Shaohui Xie
- [U-Boot] [PATCH 2/2] powerpc/t4240qds: fix XAUI card PHY address
Shaohui Xie
- [U-Boot] [PATCH] powerpc/Fman/mEMAC: mEMAC fix for 10G MAC and PHY
Shaohui Xie
- [U-Boot] [PATCH] net/phy: add VSC8574 support
Shaohui Xie
- [U-Boot] [PATCH 6/7] getenv_f() env variable exist w/o needing a buffer
James Yang
- [U-Boot] [PATCH 1/2] phy: export genphy_parse_link()
Yegor Yefremov
- [U-Boot] [PATCH] powerpc/p5040: add serdes2 memory map register define
Roy Zang
- [U-Boot] Custodians, Maintainers and old platforms
Detlev Zundel
- [U-Boot] MX23 patches
stefano babic
- [U-Boot] Moving from 1.1.6 to 2012.07 for Coldfire help
Steve deRosier
- [U-Boot] [PATCH] Fix MCF5235 SDRAM base address macro
Steve deRosier
- [U-Boot] How to boot split kernel/image of jffs2 partition?
Steve deRosier
- [U-Boot] [PATCH][v4] powerpc/mpc8xxxx: FSL DDR debugger auto run of stored commands
James.Yang at freescale.com
- [U-Boot] [PATCH] bootm: relocate names of sub-command table for archs with CONFIG_NEEDS_MANUAL_RELOC
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] MIPS: qemu-mips: update and fix example usage in README
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] MIPS: bootm.c: drop obsolete Qemu specific bootm implementation
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] README.qemu-mips: move README file from board to doc directory
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] README.mips: update known issues and TODOs
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] MIPS: start.S: remove obsolete 64 bit handling in setup_c0_status
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] MIPS: start.S: unify and simplify reset vector handling
daniel.schwierzeck at gmail.com
- [U-Boot] configure USB Host1 in U-Boot of iMx53
sarvesh gupta
- [U-Boot] [PATCH V4 3/4] video: Modify exynos_fimd driver to support LCD console
Ajay kumar
- [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP
Ajay kumar
- [U-Boot] please pull u-boot-samsung master
Ajay kumar
- [U-Boot] [PATCH 2/2] video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selected
Ajay kumar
- [U-Boot] [PATCH 9/9] dfu: Support larger than memory transfers.
kasim ling
- [U-Boot] Divide uboot into two parts
terryhuang
- [U-Boot] Watchdog of OMAP3530 in u-boot
gurucharanch at uurmi.com
- [U-Boot] [U-boot] mkimage -F parameter
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 1/7] powerpc/mpc8xxx: Enable entering DDR debugging by key press
sun york-R58495
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Алексей Бродкин
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Алексей Бродкин
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Алексей Бродкин
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
Алексей Бродкин
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
Алексей Бродкин
Last message date:
Thu Jan 31 23:36:11 CET 2013
Archived on: Thu Jan 31 23:36:25 CET 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).