[U-Boot] [PATCH v2 09/16] km/scripts: replace hardcoded uImage
Holger Brunck
holger.brunck at keymile.com
Mon Jan 21 14:55:21 CET 2013
From: Andreas Huber <andreas.huber at keymile.com>
Replace uImage with ${uimage}.
If uimage is not set, default it to uImage.
Signed-off-by: Andreas Huber <andreas.huber at keymile.com>
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
---
Changes for v2:
- none
board/keymile/scripts/develop-common.txt | 5 +++--
board/keymile/scripts/ramfs-common.txt | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt
index aa3d659..a6bb1b1 100644
--- a/board/keymile/scripts/develop-common.txt
+++ b/board/keymile/scripts/develop-common.txt
@@ -1,8 +1,9 @@
altbootcmd=run ${subbootcmds}
bootcmd=run ${subbootcmds}
-configure=km_setboardid && saveenv && reset
+configure=run set_uimage; km_setboardid && saveenv && reset
subbootcmds=tftpfdt tftpkernel nfsargs add_default boot
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch}
-tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
toolchain=/opt/eldk
rootfssize=0
+set_uimage=printenv uimage || setenv uimage uImage
diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt
index c1b45ab..8a8d287 100644
--- a/board/keymile/scripts/ramfs-common.txt
+++ b/board/keymile/scripts/ramfs-common.txt
@@ -4,8 +4,9 @@ altbootcmd=run ${subbootcmds}
bootcmd=run ${subbootcmds}
subbootcmds=tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
-configure=km_setboardid && saveenv && reset
+configure=run set_uimage; km_setboardid && saveenv && reset
rootfsfile=${hostname}/rootfsImage
setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value}
-tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage
+set_uimage=printenv uimage || setenv uimage uImage
--
1.7.1
More information about the U-Boot
mailing list