January 2013 Archives by date
      
      Starting: Wed Jan  2 04:31:36 CET 2013
         Ending: Thu Jan 31 23:36:11 CET 2013
         Messages: 2466
     
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
 
Jaehoon Chung
- [U-Boot] [PATCH V3 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Jaehoon Chung
- [U-Boot] [PATCH V3 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Jaehoon Chung
- [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to	lowlevel_init_c.c
 
Rajeshwari Birje
- [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to	lowlevel_init_c.c
 
Kyungmin Park
- [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to	lowlevel_init_c.c
 
Rajeshwari Birje
- [U-Boot] How to generate the exceptions in U-boot
 
VISWANADHULA BALAJI
- [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to	lowlevel_init_c.c
 
Kyungmin Park
- [U-Boot] [PATCH] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE
 
Lukasz Majewski
- [U-Boot] Bricked when trying to attach UBI
 
Luca Ceresoli
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words	for bus width = 8
 
Alexey Brodkin
- [U-Boot] [PATCH 1/1] omap4: use plain text env file instead	boot scripts
 
Tom Rini
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with	more common readw/writew macros
 
Alexey Brodkin
- [U-Boot] [PATCH 3/5] am335x_evm: enable support for booting via	USB
 
Tom Rini
- [U-Boot] [PATCH 5/5] am335x_evm: add new config with forced USB	booting
 
Tom Rini
- [U-Boot] [PATCH 2/5] am33xx: support for booting via usbeth
 
Tom Rini
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
 
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
 
Michal Simek
- [U-Boot] [RFC][PULL-REQ] MTD update
 
Tom Rini
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
 
Алексей Бродкин
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Tom Rini
- [U-Boot] [PATCH v2] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE
 
Lukasz Majewski
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
 
Michal Simek
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
 
Lukasz Majewski
- [U-Boot] [PATCH] Makefile: remove MLO.byteswap on clobber
 
Nishanth Menon
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Robert Nelson
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Fabio Estevam
- [U-Boot] [PATCH] tools: imximage: Let .name field be more generic
 
Fabio Estevam
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
 
Алексей Бродкин
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Troy Kisky
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Robert Nelson
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Fabio Estevam
- [PATCH] VIDEO: better document the correct use of CONFIG_FB_ADDR
 
Wolfgang Denk
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16	with more common readw/writew macros
 
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write	words for bus width = 8
 
Wolfgang Denk
- [U-Boot] [PATCH 1/3] Tegra30: clocks: Fix clock tables for I2C and other periphs
 
Stephen Warren
- [U-Boot] [PATCH 2/3] Tegra30: fdt: Update DT files with I2C info for T30/Cardhu
 
Stephen Warren
- [U-Boot] [PATCH 3/3] Tegra30: I2C: Enable I2C driver on Cardhu
 
Stephen Warren
- [U-Boot] [PATCH 1/3] Tegra30: clocks: Fix clock tables for I2C and other periphs
 
Tom Warren
- [U-Boot] [PATCH 2/3] Tegra30: fdt: Update DT files with I2C info for T30/Cardhu
 
Tom Warren
- [U-Boot] [PATCH 2/3] Tegra30: fdt: Update DT files with I2C info for T30/Cardhu
 
Stephen Warren
- [U-Boot] [PATCH v2] mx53loco: Add support for SEIKO 4.3'' WVGA panel
 
Fabio Estevam
- [U-Boot] [PATCH 1/1] omap4: use plain text env file instead	boot scripts
 
Javier Martinez Canillas
- [U-Boot] Please pull u-boot-x86.git
 
Tom Rini
- [U-Boot] [PATCH v2] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE
 
Minkyu Kang
- [U-Boot] [PATCH][RFC] MTD resync from Linux-3.8-rc2+ (master)
 
Scott Wood
- [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT value
 
Scott Wood
- [U-Boot] [RFC][PULL-REQ] MTD update
 
Scott Wood
- [U-Boot] [PATCH V3 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Amarendra Reddy
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock	divisor
 
Amarendra Reddy
- [U-Boot] Pull request: u-boot-arm/master
 
Joonyoung Shim
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
 
Jaehoon Chung
- [U-Boot] [PATCH V3 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Jaehoon Chung
- [U-Boot] Pull request: u-boot-arm/master
 
Lukasz Majewski
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for	mmc
 
Piotr Wilczek
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for	mmc
 
Piotr Wilczek
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
 
Michal Simek
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write	words for bus width = 8
 
Wolfgang Denk
- [U-Boot] [PATCH V3 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Amarendra Reddy
- [U-Boot] [PATCH 9/9] dfu: Support larger than memory transfers.
 
kasim ling
- [U-Boot] [PATCH 0/2] EXYNOS: EXYNOS5250: Separate setting configuration of exynos5250 from exynos5
 
Donghwa Lee
- [U-Boot] [PATCH 1/2] EXYNOS: EXYNOS5250: add exynos5250 register	addresses
 
Donghwa Lee
- [U-Boot] [PATCH 2/2] EXYNOS: EXYNOS5250: add gpio structure for	EXYNOS5250
 
Donghwa Lee
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Stefano Babic
- [U-Boot] [PATCH V2] drivers/block/systemace - added missing "else"	in "ace_writew"
 
Alexey Brodkin
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
 
Michal Simek
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Jeroen Hofstee
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write	words for bus width = 8
 
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
 
Michal Simek
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Wolfgang Denk
- [U-Boot] [PATCH v2] VIDEO: better document the correct use of	CONFIG_FB_ADDR
 
Wolfgang Denk
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
 
Jaehoon Chung
- [U-Boot] [PATCH] drivers/block/systemace - fixed data type in	"systemace_read" to match prototype in "block_dev_desc_t"
 
Alexey Brodkin
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock	divisor
 
Amarendra Reddy
- [U-Boot] MPC8555 pci issue
 
Ashok Kumar Kacham
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
 
Алексей Бродкин
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write	words for bus width = 8
 
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16	with more common readw/writew macros
 
Wolfgang Denk
- [U-Boot] MPC8555 pci issue
 
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: fixes read/write words for bus width = 8
 
Алексей Бродкин
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16	with more common readw/writew macros
 
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
 
Michal Simek
- [U-Boot] MPC8555 pci issue
 
Ashok Kumar Kacham
- [U-Boot] [PATCH] tools: imximage: Load a size that is multiple of	512
 
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Marek Vasut
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Fabio Estevam
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16	with more common readw/writew macros
 
Wolfgang Denk
- [U-Boot] Rx FIFO: more than 64 bytes receive error
 
Albert ARIBAUD
- [U-Boot] [PATCH 0/3 V3] EXYNOS5: MAX77686 add FDT support
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V3] EXYNOS5: FDT: Add compatible strings for	PMIC
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V3] EXYNOS5: Add device node for PMIC
 
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V3] PMIC: MAX77686: Add FDT Support
 
Rajeshwari Shinde
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Marek Vasut
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
 
Michal Simek
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Stefano Babic
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Stefano Babic
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Fabio Estevam
- [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock	divisor
 
Amarendra Reddy
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16	with more common readw/writew macros
 
Wolfgang Denk
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
 
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v3 2/2] sf: Add config register reading support
 
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 1/3] EHCI: Exynos: Add fdt support
 
Vivek Gautam
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Vivek Gautam
- [U-Boot] [PATCH v3 3/3] EXYNOS5: FDT: Add compatible strings for USB
 
Vivek Gautam
- [U-Boot] [PATCH v2] SMDK5250: Enable VBus for USB 2.0 controller
 
Vivek Gautam
- [U-Boot] Writting uImage from linux using nandwrite on Blackfin	based system
 
Dimitar Penev
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Jeroen Hofstee
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Troy Kisky
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple	of 512
 
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Fix PMIC name
 
Fabio Estevam
- [PATCH] MIPS: bootm.c: add support for passing device-tree to Linux
 
Gabor Juhos
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Wolfgang Denk
- [U-Boot] is it possilbe to have uboot find the kernel in the file	system?
 
John Stile
- [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT	value
 
Tom Rini
- [U-Boot] is it possilbe to have uboot find the kernel in the	file system?
 
Wolfgang Denk
- [U-Boot] [PATCH][RFC] MTD resync from Linux-3.8-rc2+ (master)
 
Sergey Lapin
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
 
Troy Kisky
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
 
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Otavio Salvador
- [U-Boot] [PATCH][RFC] MTD resync from Linux-3.8-rc2+ (master)
 
Wolfgang Denk
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
 
John Stile
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Marek Vasut
- [U-Boot] [PATCH 0/3 V4] EXYNOS5: MAX77686 add FDT support
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V4] EXYNOS5: FDT: Add compatible strings for	PMIC
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V4] EXYNOS5: Add device node for PMIC
 
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V4] PMIC: MAX77686: Add FDT Support
 
Rajeshwari Shinde
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
 
Dirk Behme
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
 
Lukasz Majewski
- [U-Boot] is it possilbe to have uboot find the kernel in the	file system?
 
Wolfgang Denk
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
 
Stefano Babic
- [U-Boot] [PATCH 0/3] Enable eMMC on mx6qsabresd board
 
Stefano Babic
- [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support EMMC	booting
 
Amarendra Reddy
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16 with more common readw/writew macros
 
Алексей Бродкин
- [U-Boot] [PATCH V4 0/9] EXYNOS5: Enable DWMMC,	add FDT support for DWMMC and
 
Amar
- [U-Boot] [PATCH V4 1/9] FDT: Add compatible string for DWMMC
 
Amar
- [U-Boot] [PATCH V4 2/9] EXYNOS5: FDT: Add DWMMC device node data
 
Amar
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Amar
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
 
Amar
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor
 
Amar
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
 
Amar
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot	partition
 
Amar
- [U-Boot] [PATCH V4 8/9] SMDK5250: Enable EMMC booting
 
Amar
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC	booting and to
 
Amar
- [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support EMMC	booting
 
Wolfgang Denk
- [U-Boot] [PATCH] drivers/block/systemace: replaced in16/out16	with more common readw/writew macros
 
Wolfgang Denk
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC	boot partition
 
Jaehoon Chung
- [U-Boot] [PATCH v7] qi_lb60: add nand spl support
 
Xiangfu Liu
- [U-Boot] [PATCH 0/2] powerpc/p2041: u-boot.pbl build for P2041RDB
 
Valentin Longchamp
- [U-Boot] [PATCH 1/2] powerpc/p2041: add RCW file for P2041RDB
 
Valentin Longchamp
- [U-Boot] [PATCH 2/2] powerpc/p2041: set RCW and PBI files for .pbl	build or P2041RDB
 
Valentin Longchamp
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
 
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
 
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Marek Vasut
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
 
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Marek Vasut
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk
 
Scott Wood
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Marek Vasut
- [U-Boot] [PATCH 9/9] dfu: Support larger than memory transfers.
 
Pantelis Antoniou
- [U-Boot] [PATCH 1/7] powerpc/mpc8xxx: Enable entering DDR debugging	by key press
 
York Sun
- [U-Boot] [PATCH 2/7] Move DDR command parsing to separate function
 
York Sun
- [U-Boot] [PATCH 3/7] Fix data stage name matching issue
 
York Sun
- [U-Boot] [PATCH 4/7] Add copy command to FSL DDR interactive
 
York Sun
- [U-Boot] [PATCH 5/7] README.fsl-ddr typos and update to reflect	hotkey
 
York Sun
- [U-Boot] [PATCH 6/7] getenv_f() env variable exist w/o needing a	buffer
 
York Sun
- [U-Boot] [PATCH 7/7] powerpc/mpc8xxx: FSL DDR debugger auto run of	stored commands
 
York Sun
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
 
John Stile
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Jeroen Hofstee
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
 
Jeroen Hofstee
- [U-Boot] [PATCH 6/7] getenv_f() env variable exist w/o needing	a buffer
 
Wolfgang Denk
- [U-Boot] is it possilbe to have uboot find the kernel in the	file system?
 
Wolfgang Denk
- [U-Boot] [PATCH 6/7] getenv_f() env variable exist w/o needing a buffer
 
James Yang
- [U-Boot] NOR NAND Interference question
 
Andrei
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
 
Fabio Estevam
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is multiple of 512
 
Fabio Estevam
- [U-Boot] [PATCH] mx6: Add workaround for ARM errata
 
Fabio Estevam
- [U-Boot] [PATCH v2] mx6: Add workaround for ARM errata
 
Fabio Estevam
- [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S
 
Simon Glass
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
 
John Stile
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
 
Simon Glass
- [U-Boot] [PATCH v2] mx6: Add workaround for ARM errata
 
Troy Kisky
- [U-Boot] [RFC PATCH 0/44] RFC: Verified boot implementation based	on FIT
 
Simon Glass
- [U-Boot] [RFC PATCH 01/44] sandbox: config: Enable CONFIG_FIT and	CONFIG_CMD_FIT
 
Simon Glass
- [U-Boot] [RFC PATCH 02/44] bootstage: Don't build for HOSTCC
 
Simon Glass
- [U-Boot] [RFC PATCH 03/44] mkimage: Move ARRAY_SIZE to header file
 
Simon Glass
- [U-Boot] [RFC PATCH 04/44] libfdt: Add fdt_next_subnode() to permit	easy subnode iteration
 
Simon Glass
- [U-Boot] [RFC PATCH 05/44] image: Move timestamp #ifdefs to header	file
 
Simon Glass
- [U-Boot] [RFC PATCH 06/44] image: Export fit_check_ramdisk()
 
Simon Glass
- [U-Boot] [RFC PATCH 07/44] image: Split FIT code into new	image-fit.c
 
Simon Glass
- [U-Boot] [RFC PATCH 08/44] image: Move HOSTCC image code to tools/
 
Simon Glass
- [U-Boot] [RFC PATCH 09/44] image: Split hash node processing into	its own function
 
Simon Glass
- [U-Boot] [RFC PATCH 10/44] image: Convert	fit_image_hash_set_value() to static, and rename
 
Simon Glass
- [U-Boot] [RFC PATCH 11/44] image: Rename fit_image_check_hashes()	to fit_image_verify()
 
Simon Glass
- [U-Boot] [RFC PATCH 12/44] image: Move hash checking into its own	functions
 
Simon Glass
- [U-Boot] [RFC PATCH 13/44] image: Move error! string to common place
 
Simon Glass
- [U-Boot] [RFC PATCH 14/44] image: Export fit_conf_get_prop_node()
 
Simon Glass
- [U-Boot] [RFC PATCH 15/44] image: Rename fit_add_hashes() to	fit_add_verification_data()
 
Simon Glass
- [U-Boot] [RFC PATCH 16/44] image: Rename hash printing to	fit_image_print_verification_data()
 
Simon Glass
- [U-Boot] [RFC PATCH 17/44] sandbox: Add CONFIG_OF_HOSTFILE to read	FDT from host file
 
Simon Glass
- [U-Boot] [RFC PATCH 18/44] fdt: Add a parameter to fdt_valid()
 
Simon Glass
- [U-Boot] [RFC PATCH 19/44] Add getenv_hex() to return an	environment variable as hex
 
Simon Glass
- [U-Boot] [RFC PATCH 20/44] fdt: Allow fdt command to check and	update control FDT
 
Simon Glass
- [U-Boot] [RFC PATCH 21/44] sandbox: fdt: Support fdt command for	sandbox
 
Simon Glass
- [U-Boot] [RFC PATCH 22/44] env: Fix minor comment typos in	cmd_nvedit
 
Simon Glass
- [U-Boot] [RFC PATCH 23/44] fdt: Skip checking FDT if the pointer is	NULL
 
Simon Glass
- [U-Boot] [RFC PATCH 24/44] Revert "fdt- Tell the FDT library where	the device tree is"
 
Simon Glass
- [U-Boot] [RFC PATCH 25/44] Add stdarg to vsprintf.h
 
Simon Glass
- [U-Boot] [RFC PATCH 26/44] Add minor updates to README.fdt-control
 
Simon Glass
- [U-Boot] [RFC PATCH 27/44] hash: Add a way to calculate a hash for	any algortihm
 
Simon Glass
- [U-Boot] [RFC PATCH 28/44] sandbox: config: Enable FIT signatures	with RSA
 
Simon Glass
- [U-Boot] [RFC PATCH 29/44] sandbox: Provide a way to map from host	RAM to U-Boot RAM
 
Simon Glass
- [U-Boot] [RFC PATCH 30/44] sandbox: image: Add support for booting	images in sandbox
 
Simon Glass
- [U-Boot] [RFC PATCH 31/44] image: Add signing infrastructure
 
Simon Glass
- [U-Boot] [RFC PATCH 32/44] image: Support signing of images
 
Simon Glass
- [U-Boot] [RFC PATCH 33/44] image: Verify signatures in FIT images
 
Simon Glass
- [U-Boot] [RFC PATCH 34/44] image: Add RSA support for image signing
 
Simon Glass
- [U-Boot] [RFC PATCH 35/44] mkimage: Put FIT loading in function and	tidy error handling
 
Simon Glass
- [U-Boot] [RFC PATCH 36/44] mkimage: Add -k option to specify key	directory
 
Simon Glass
- [U-Boot] [RFC PATCH 37/44] mkimage: Add -K to write public keys to	an FDT blob
 
Simon Glass
- [U-Boot] [RFC PATCH 38/44] mkimage: Add -F option to modify an	existing .fit file
 
Simon Glass
- [U-Boot] [RFC PATCH 39/44] mkimage: Add -c option to specify a	comment for key signing
 
Simon Glass
- [U-Boot] [RFC PATCH 40/44] mkimage: Add -r option to specify keys	that must be verified
 
Simon Glass
- [U-Boot] [RFC PATCH 41/44] libfdt: Add fdt_find_regions()
 
Simon Glass
- [U-Boot] [RFC PATCH 42/44] image: Add support for signing of FIT	configurations
 
Simon Glass
- [U-Boot] [RFC PATCH 43/44] Add verified boot information and test
 
Simon Glass
- [U-Boot] [RFC PATCH 44/44] WIP: sandbox: config: Add test config	for verified boot
 
Simon Glass
- [U-Boot] is it possilbe to have uboot find the kernel in the file system?
 
Bo Shen
- [U-Boot] [PATCH v3] mx6: Add workaround for ARM errata
 
Fabio Estevam
- [U-Boot] [PATCH 6/7] getenv_f() env variable exist w/o needing	a buffer
 
Wolfgang Denk
- [U-Boot] [RFC PATCH 03/44] mkimage: Move ARRAY_SIZE to header	file
 
Marek Vasut
- [U-Boot] [RFC PATCH 05/44] image: Move timestamp #ifdefs to	header file
 
Marek Vasut
- [U-Boot] [RFC PATCH 06/44] image: Export fit_check_ramdisk()
 
Marek Vasut
- [U-Boot] [RFC PATCH 07/44] image: Split FIT code into new	image-fit.c
 
Marek Vasut
- [U-Boot] [RFC PATCH 08/44] image: Move HOSTCC image code to	tools/
 
Marek Vasut
- [U-Boot] [RFC PATCH 09/44] image: Split hash node processing	into its own function
 
Marek Vasut
- [U-Boot] [RFC PATCH 10/44] image: Convert	fit_image_hash_set_value() to static, and rename
 
Marek Vasut
- [U-Boot] [RFC PATCH 11/44] image: Rename	fit_image_check_hashes() to fit_image_verify()
 
Marek Vasut
- [U-Boot] [RFC PATCH 12/44] image: Move hash checking into its	own functions
 
Marek Vasut
- [U-Boot] [RFC PATCH 13/44] image: Move error! string to common	place
 
Marek Vasut
- [U-Boot] [RFC PATCH 14/44] image: Export	fit_conf_get_prop_node()
 
Marek Vasut
- [U-Boot] [RFC PATCH 16/44] image: Rename hash printing to	fit_image_print_verification_data()
 
Marek Vasut
- [U-Boot] [RFC PATCH 30/44] sandbox: image: Add support for	booting images in sandbox
 
Marek Vasut
- [U-Boot] [RFC PATCH 32/44] image: Support signing of images
 
Marek Vasut
- [U-Boot] [RFC PATCH 33/44] image: Verify signatures in FIT	images
 
Marek Vasut
- [U-Boot] [RFC PATCH 34/44] image: Add RSA support for image	signing
 
Marek Vasut
- [U-Boot] [RFC PATCH 35/44] mkimage: Put FIT loading in function	and tidy error handling
 
Marek Vasut
- [U-Boot] [RFC PATCH 36/44] mkimage: Add -k option to specify	key directory
 
Marek Vasut
- [U-Boot] [RFC PATCH 37/44] mkimage: Add -K to write public keys	to an FDT blob
 
Marek Vasut
- [U-Boot] [RFC PATCH 38/44] mkimage: Add -F option to modify an	existing .fit file
 
Marek Vasut
- [U-Boot] [RFC PATCH 39/44] mkimage: Add -c option to specify a	comment for key signing
 
Marek Vasut
- [U-Boot] [RFC PATCH 40/44] mkimage: Add -r option to specify	keys that must be verified
 
Marek Vasut
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Jeroen Hofstee
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Stefano Babic
- [U-Boot] [PATCH] mx35pdk:Use IMX_GPIO_NR macro
 
Stefano Babic
- [U-Boot] [PATCH v2 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
 
Stefano Babic
- [U-Boot] [PATCH 1/3] fsl_esdhc: add MMC_MODE_HC host_caps
 
Stefano Babic
- [U-Boot] [PATCH 3/3] mx6qsabresd: use on-board eMMC to store	environment
 
Stefano Babic
- [U-Boot] [PATCH 2/3] mx6qsabresd: add usdhc2 and usdhc4 support
 
Stefano Babic
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Marek Vasut
- [U-Boot] [PATCH v2] tools: imximage: Load a size that is	multiple of 512
 
Stefano Babic
- [U-Boot] [PATCH v2 2/2] mx53loco: Improve error handling on	power_init()
 
Stefano Babic
- [U-Boot] [PATCH] mx51evk: Remove unneeded comment
 
Stefano Babic
- [U-Boot] [PATCH v2 1/2] mx53loco: Remove unneeded 'retval'	variable
 
Stefano Babic
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
 
Stefano Babic
- [U-Boot] global variables from comon/lcd.c
 
Jeroen Hofstee
- [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to	m28evk
 
Marek Vasut
- [U-Boot] [RFC]: always relocate u-boot before the framebuffer
 
Wolfgang Denk
- [U-Boot] global variables from comon/lcd.c
 
Wolfgang Denk
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
 
Wolfgang Denk
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
 
Wolfgang Denk
- [U-Boot] [PATCH] nds32: Add a basic errno.h
 
Simon Glass
- [U-Boot] [PATCH v3 8/8] buildman - U-Boot multi-threaded builder	and summary tool
 
Simon Glass
- [U-Boot] [RFC PATCH 33/44] image: Verify signatures in FIT	images
 
Simon Glass
- [U-Boot] [RFC PATCH 32/44] image: Support signing of images
 
Simon Glass
- [U-Boot] [RFC PATCH 35/44] mkimage: Put FIT loading in function and tidy error handling
 
Simon Glass
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
 
Lukasz Majewski
- [U-Boot] [PATCH] MIPS: bootm.c: use debug macro to print debug	message
 
Gabor Juhos
- [U-Boot] [PATCH] nds32: Add a basic errno.h
 
Macpaul Lin
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
 
Simon Glass
- [U-Boot] [PATCH] nds32: Add a basic errno.h
 
Simon Glass
- [U-Boot] [PATCH] nds32: Add a basic errno.h
 
Tom Rini
- [U-Boot] [PATCH] nds32: Add a basic errno.h
 
Simon Glass
- [U-Boot] [PATCH v7] qi_lb60: add nand spl support
 
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: bootm.c: use debug macro to print debug	message
 
Daniel Schwierzeck
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and	dcache flush for lcd subsystem
 
Wolfgang Denk
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
 
Simon Glass
- [U-Boot] [PATCH v4 3/4] dtc/libfdt: introduce fdt types for	annotation by endian checkers
 
Jon Loeliger
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
 
Jeroen Hofstee
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
 
Anatolij Gustschin
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and dcache flush for lcd subsystem
 
Anatolij Gustschin
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
 
Anatolij Gustschin
- [U-Boot] [PATCH RESEND] video:cache:fix: Buffer alignment and	dcache flush for lcd subsystem
 
Wolfgang Denk
- [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Adjust SDRAM setting
 
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] arm: rmobile: kzm9g: Adjust ETM trace clock
 
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function for mmc
 
Jaehoon Chung
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC	boot partition
 
Amarendra Reddy
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
 
Jaehoon Chung
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC	boot partition
 
Amarendra Reddy
- [U-Boot] [PATCH] common/cmd_bootm.c: prevent running of subcommands	before 'bootm start'
 
Gabor Juhos
- [U-Boot] [PATCH V4 7/9] MMC: APIs to support resize of EMMC boot partition
 
Jaehoon Chung
- [U-Boot] [PATCH 1/2] video:cache:fix: Proper buffer alignment for	lcd subsystem
 
Lukasz Majewski
- [U-Boot] [PATCH 2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem
 
Lukasz Majewski
- [U-Boot] [PATCH 1/2] serial/ns16550: add an option to avoid hanging	on broken platforms
 
Javier Martinez Canillas
- [U-Boot] [PATCH 2/2] OMAP3: igep00x0: add	CONFIG_SYS_NS16550_BROKEN_TEMT
 
Javier Martinez Canillas
- [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT	value
 
Javier Martinez Canillas
- [U-Boot] [PATCH v2 2/6] mx28evk: We shouldn't hardcode a rootfs	filesystem type
 
Otavio Salvador
- [U-Boot] Pull request for u-boot-marvell.git
 
Prafulla Wadaskar
- [U-Boot] [PATCH 1/3] MIPS: bootm.c: separate linux jump code
 
Gabor Juhos
- [U-Boot] [PATCH 2/3] MIPS: bootm.c: separate environment	initialization
 
Gabor Juhos
- [U-Boot] [PATCH 3/3] MIPS: bootm.c: add support for 'prep' and 'go'	subcommands
 
Gabor Juhos
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH 0/4 V2] SMDK5250: Convert lowlevel_init.S to .c and set PMIC values
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/4 V2] EXYNOS: Add functions for power	initialisation
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to	lowlevel_init.c
 
Rajeshwari Shinde
- [U-Boot] [PATCH 3/4 V2] SMDK5250: Add PMIC voltage settings
 
Rajeshwari Shinde
- [U-Boot] [PATCH 4/4 V2] SMDK5250: Modify IRAM stack pointer address
 
Rajeshwari Shinde
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Benoît Thébaudeau
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH v2 1/1] omap4: allow the use of a plain text env	file instead boot scripts
 
Javier Martinez Canillas
- [U-Boot] [PATCH] nds32: Add a basic errno.h
 
Tom Rini
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
 
Tom Rini
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
 
Tom Rini
- [U-Boot] [PATCH v2 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type
 
Tom Rini
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
 
Otavio Salvador
- [U-Boot] FW: Configuring USB Host1 in U-Boot for I.MX53
 
Sarvesh  Gupta
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not
 
Tom Rini
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Fabio Estevam
- [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S
 
Tom Rini
- [U-Boot] [PATCH v4 2/2] arm: remove useless code in start.S	files
 
Tom Rini
- [U-Boot] [PATCH 0/7] omap mmc: implement card detect and write	protection
 
Tom Rini
- [U-Boot] Update OMAP5 "unmap first page" patch series
 
Vincent Stehlé
- [U-Boot] [PATCH v4 1/3] ARM: cache: declare set_section_dcache
 
Vincent Stehlé
- [U-Boot] [PATCH v4 2/3] ARM: cache: introduce weak	arm_setup_identity_mapping
 
Vincent Stehlé
- [U-Boot] [PATCH v4 3/3] ARM: OMAP5: redefine	arm_setup_identity_mapping
 
Vincent Stehlé
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Benoît Thébaudeau
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH v2] SMDK5250: Enable VBus for USB 2.0 controller
 
Marek Vasut
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH v3 0/6] Improve default environment for easy use
 
Otavio Salvador
- [U-Boot] [PATCH v3 1/6] mx6qsabrelite: Use tabs to environment	setting
 
Otavio Salvador
- [U-Boot] [PATCH v3 2/6] mx28evk: We shouldn't hardcode a rootfs	filesystem type
 
Otavio Salvador
- [U-Boot] [PATCH v3 3/6] mx28evk: Add support to dynamically choose	between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v3 4/6] mx53loco: Add support to dynamically choose	between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v3 5/6] mx6qsabrelite: Add support to dynamically	choose between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v3 6/6] mx6qsabre{auto,	sd}: Add support to dynamically choose between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v3 3/6] mx28evk: Add support to dynamically choose between ftd use or not
 
Fabio Estevam
- [U-Boot] [PATCH] bootm: relocate names of sub-command table for	archs with CONFIG_NEEDS_MANUAL_RELOC
 
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Benoît Thébaudeau
- [U-Boot] [PATCH v3 3/6] mx28evk: Add support to dynamically choose between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v3 3/6] mx28evk: Add support to dynamically choose between ftd use or not
 
Fabio Estevam
- [U-Boot] [PATCH 3/3] MIPS: bootm.c: add support for 'prep' and	'go' subcommands
 
Daniel Schwierzeck
- [U-Boot] [u-boot-release] [PATCH 6/7] getenv_f() env variable exist w/o needing a buffer
 
Timur Tabi
- [U-Boot] Selecting from multiple device trees at runtime
 
Curt Brune
- [U-Boot] Selecting from multiple device trees at runtime
 
Stephen Warren
- [U-Boot] Selecting from multiple device trees at runtime
 
Curt Brune
- [U-Boot] [PATCH 3/3] MIPS: bootm.c: add support for 'prep' and	'go' subcommands
 
Gabor Juhos
- [U-Boot] Selecting from multiple device trees at runtime
 
Wolfgang Denk
- [U-Boot] [PATCH 3/3] MIPS: bootm.c: add support for 'prep' and	'go' subcommands
 
Gabor Juhos
- [U-Boot] Proposal for an interface to pass a DT to the kernel on	MIPS
 
Gabor Juhos
- [U-Boot] [PATCH] Introduce a global bool type
 
York Sun
- [U-Boot] Selecting from multiple device trees at runtime
 
Curt Brune
- [U-Boot] [PATCH] Introduce a global bool type
 
Scott Wood
- [U-Boot] [u-boot-release] [PATCH] Introduce a global bool type
 
Timur Tabi
- [U-Boot] [PATCH] Introduce a global bool type
 
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
 
Scott Wood
- [U-Boot] [PATCH] Introduce a global bool type
 
Måns Rullgård
- [U-Boot] [Patch v2] Introduce a global bool type
 
York Sun
- [U-Boot] [PATCH][v4] powerpc/mpc8xxxx: FSL DDR debugger auto run of	stored commands
 
James.Yang at freescale.com
- [U-Boot] NOR NAND Interference question
 
Scott Wood
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Scott Wood
- [U-Boot] [PATCH 2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem
 
Minkyu Kang
- [U-Boot] [PATCH 1/2] video:cache:fix: Proper buffer alignment	for lcd subsystem
 
Simon Glass
- [U-Boot] [PATCH 2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem
 
Simon Glass
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function	for mmc
 
Minkyu Kang
- [U-Boot] [PATCH 00/16 V2] SMDK5250: Add FDT support
 
Minkyu Kang
- [U-Boot] [PATCH V4 3/4] video: Modify exynos_fimd driver to support LCD console
 
Minkyu Kang
- [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP
 
Minkyu Kang
- [U-Boot] Selecting from multiple device trees at runtime
 
Simon Glass
- [U-Boot] [PATCH] net/phy: fix select line for TN80xx
 
Xie Shaohui-B21989
- [U-Boot] [PATCH 00/16 V2] SMDK5250: Add FDT support
 
Rajeshwari Birje
- [U-Boot] [PATCH V4 3/4] video: Modify exynos_fimd driver to support LCD console
 
Ajay kumar
- [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP
 
Ajay kumar
- [U-Boot] [PATCH V4 3/4] video: Modify exynos_fimd driver to support LCD console
 
Minkyu Kang
- [U-Boot] [PATCH 0/3 V4] EXYNOS5: MAX77686 add FDT support
 
Rajeshwari Birje
- [U-Boot] [PATCH v2] SMDK5250: Enable VBus for USB 2.0 controller
 
Vivek Gautam
- [U-Boot] [PATCH] Introduce a global bool type
 
Wolfgang Denk
- [U-Boot] [Patch v2] Introduce a global bool type
 
Wolfgang Denk
- [U-Boot] [PATCH v3] SMDK5250: Enable VBus for USB 2.0 controller
 
Vivek Gautam
- [U-Boot] [PATCH 1/7] powerpc/mpc8xxx: Enable entering DDR	debugging by key press
 
Wolfgang Denk
- [U-Boot] [PATCH v7] qi_lb60: add nand spl support
 
Xiangfu Liu
- [U-Boot] [PATCH 1/7] powerpc/mpc8xxx: Enable entering DDR debugging by key press
 
sun york-R58495
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH v2] SMDK5250: Enable VBus for USB 2.0 controller
 
Marek Vasut
- [U-Boot] [PATCH v3 1/3] EHCI: Exynos: Add fdt support
 
Marek Vasut
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Marek Vasut
- [U-Boot] [PATCH v3 3/3] EXYNOS5: FDT: Add compatible strings	for USB
 
Marek Vasut
- [U-Boot] Proposal for an interface to pass a DT to the kernel on	MIPS
 
Gabor Juhos
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH V5 0/4] Add support for FIMD and DP on SMDK5250
 
Ajay Kumar
- [U-Boot] [PATCH V3 1/4] EXYNOS5: Change parent clock of FIMD to MPLL
 
Ajay Kumar
- [U-Boot] [PATCH V3 2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
 
Ajay Kumar
- [U-Boot] [PATCH V5 3/4] video: Modify exynos_fimd driver to support	LCD console
 
Ajay Kumar
- [U-Boot] [PATCH V5 4/4] EXYNOS5: Add support for FIMD and DP
 
Ajay Kumar
- [U-Boot] [PATCH 1/2] video:cache:fix: Proper buffer alignment for lcd subsystem
 
Lukasz Majewski
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Vivek Gautam
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Marek Vasut
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Vivek Gautam
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Marek Vasut
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Minkyu Kang
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Marek Vasut
- [U-Boot] [PATCH v4 1/3] EHCI: Exynos: Add fdt support
 
Vivek Gautam
- [U-Boot] [PATCH v4 2/3] EXYNOS5: Add device node for USB.
 
Vivek Gautam
- [U-Boot] [PATCH v4 3/3] EXYNOS5: FDT: Add compatible strings for USB
 
Vivek Gautam
- [U-Boot] [PATCH v4] SMDK5250: Enable VBus for USB 2.0 controller
 
Vivek Gautam
- [U-Boot] [PATCH v3 2/3] EXYNOS5: Add device node for USB.
 
Vivek Gautam
- [U-Boot] [PATCH 2/2] video:cache:fix:trats: Enable dcache flush for TRATS board's LCD subsystem
 
Minkyu Kang
- [U-Boot] [PATCH] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards
 
Lukasz Majewski
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Fabio Estevam
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] uboot and Ethernet Controller issue
 
Sandeep C R
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Marek Vasut
- [U-Boot] [PATCH v4 3/3] ARM: OMAP5: redefine	arm_setup_identity_mapping
 
R Sricharan
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Benoît Thébaudeau
- [U-Boot] [RFC PATCH 1/2] ARM: cache: Introduce weak dram_bank_setup	function
 
R Sricharan
- [U-Boot] [RFC PATCH 2/2] ARM: mmu: Set domain permissions to client	access
 
R Sricharan
- [U-Boot] Pull request for u-boot-marvell.git
 
Andreas Bießmann
- [U-Boot] [RFC PATCH 1/2] ARM: cache: Introduce weak dram_bank_setup function
 
Stefan Roese
- [U-Boot] [PATCH v4 1/3] EHCI: Exynos: Add fdt support
 
Minkyu Kang
- [U-Boot] [PATCH v4 2/3] EXYNOS5: Add device node for USB.
 
Minkyu Kang
- [U-Boot] [PATCH v4 3/3] EXYNOS5: FDT: Add compatible strings for USB
 
Minkyu Kang
- [U-Boot] [PATCH v4] SMDK5250: Enable VBus for USB 2.0 controller
 
Minkyu Kang
- [U-Boot] [PATCH 1/2] board/qemu-mips: fix a typo in README
 
Gabor Juhos
- [U-Boot] [PATCH 2/2] board/qemu-mips: add '-M mips' switch to the	example usage command
 
Gabor Juhos
- [U-Boot] [PATCH v4 3/3] ARM: OMAP5: redefine	arm_setup_identity_mapping
 
Vincent Stehlé
- [U-Boot] [PATCH] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards
 
Minkyu Kang
- [U-Boot] [PATCH V5 4/4] EXYNOS5: Add support for FIMD and DP
 
Minkyu Kang
- [U-Boot] [RFC PATCH 1/2] ARM: cache: Introduce weak dram_bank_setup function
 
R Sricharan
- [U-Boot] [PATCH v4 3/3] ARM: OMAP5: redefine	arm_setup_identity_mapping
 
R Sricharan
- [U-Boot] Please pull u-boot-ti/master
 
Albert ARIBAUD
- [U-Boot] [PATCH v2] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards
 
Lukasz Majewski
- [U-Boot] [PATCH 0/2] calimain: Generate random MAC address for	factory testing
 
Christian Riesch
- [U-Boot] [PATCH 1/2] net: Remove call of srand from	eth_random_enetaddr()
 
Christian Riesch
- [U-Boot] [PATCH 2/2] calimain: Generate random MAC address for	factory tests
 
Christian Riesch
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function	for mmc
 
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx
 
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] video:cache:fix: Proper buffer alignment	for lcd subsystem
 
Simon Glass
- [U-Boot] Pull request for u-boot-marvell.git
 
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
 
Albert ARIBAUD
- [U-Boot] [PATCH] mxs: Use __weak annotation to simplify code
 
Fabio Estevam
- [U-Boot] [PATCH] mxs: Use __weak annotation to simplify code
 
Marek Vasut
- [U-Boot] [PATCH] common: env_mmc: Use __weak annotation to simplify	code
 
Fabio Estevam
- [U-Boot] [PATCH] common: env_mmc: Use __weak annotation to	simplify code
 
Marek Vasut
- [U-Boot] Selecting from multiple device trees at runtime
 
Stephen Warren
- [U-Boot] Selecting from multiple device trees at runtime
 
Simon Glass
- [U-Boot] [PATCH] Introduce a global bool type
 
Tabi Timur-B04825
- [U-Boot] [PATCH 1/2] am33xx: add a pulldown macro to pinmux config
 
Lars Poeschel
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
 
Lars Poeschel
- [U-Boot] [PATCH] MIPS: qemu-mips: update and fix example usage in	README
 
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH v4 0/2] Factorize ARM startup code as mush as	possible.
 
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
 
Prafulla Wadaskar
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for	SDHCI_send_command()
 
Lukasz Majewski
- [U-Boot] [PATCH 1/2] board/qemu-mips: fix a typo in README
 
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] board/qemu-mips: add '-M mips' switch to the example usage command
 
Daniel Schwierzeck
- [U-Boot] uboot and Ethernet Controller issue
 
Wolfgang Denk
- [U-Boot] Selecting from multiple device trees at runtime
 
Stephen Warren
- [U-Boot] [PATCH 1/2] net: Remove call of srand from	eth_random_enetaddr()
 
Wolfgang Denk
- [U-Boot] [PATCH 2/2] calimain: Generate random MAC address for	factory tests
 
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
 
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
 
Timur Tabi
- [U-Boot] Selecting from multiple device trees at runtime
 
Simon Glass
- [U-Boot] [PATCH 0/2] ARM: mmu: Set domain permissions to client	access
 
R Sricharan
- [U-Boot] [PATCH 1/2] ARM: mmu: Introduce weak dram_bank_setup	function
 
R Sricharan
- [U-Boot] [PATCH 1/2] ARM: mmu: Introduce weak dram_bank_setup	function
 
R Sricharan
- [U-Boot] [PATCH 2/2] ARM: mmu: Set domain permissions to client	access
 
R Sricharan
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
 
Barry Grussling
- [U-Boot] [PATCH 1/2] mxc nand: Add support for i.MX5
 
Scott Wood
- [U-Boot] [PATCH] Introduce a global bool type
 
Bernhard Walle
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec	phyCORE-AM335x
 
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
 
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
 
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
 
Timur Tabi
- [U-Boot] [RFC 1/3] MIPS: bootm_qemu_mips.c: separate linux	preparation code
 
Gabor Juhos
- [U-Boot] [RFC 2/3] MIPS: bootm_qemu_mips.c: separate linux jump code
 
Gabor Juhos
- [U-Boot] [RFC 3/3] MIPS: bootm.c: integrate QEMU specific functions
 
Gabor Juhos
- [U-Boot] Pull request for u-boot-marvell.git
 
Albert ARIBAUD
- [U-Boot] setting the environment address
 
John Stile
- [U-Boot] [PATCH 1/7] powerpc/mpc8xxx: Enable entering DDR debugging by key press
 
York Sun
- [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S
 
Tom Rini
- [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S
 
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
 
Albert ARIBAUD
- [U-Boot] [PATCH] Introduce a global bool type
 
York Sun
- [U-Boot] MPC8555 pci issue
 
Scott Wood
- [U-Boot] [PATCH v5 0/2] Factorize ARM startup code as much as	possible.
 
Albert ARIBAUD
- [U-Boot] [PATCH v5 1/2] arm: move C runtime setup code in crt0.S
 
Albert ARIBAUD
- [U-Boot] [PATCH v5 2/2] arm: remove useless code in start.S files
 
Albert ARIBAUD
- [U-Boot] setting the environment address
 
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
 
Simon Glass
- [U-Boot] Pull request: u-boot-arm/master
 
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
 
Simon Glass
- [U-Boot] Secure update of uboot devices?
 
Simon Glass
- [U-Boot] [PATCH v5 0/2] Factorize ARM startup code as much as	possible.
 
Albert ARIBAUD
- [U-Boot] [PATCH] Introduce a global bool type
 
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
 
York Sun
- [U-Boot] [PATCH] Introduce a global bool type
 
Scott Wood
- [U-Boot] Pull request: u-boot-arm/master
 
Tom Rini
- [U-Boot] Selecting from multiple device trees at runtime
 
Stephen Warren
- [U-Boot] Selecting from multiple device trees at runtime
 
Simon Glass
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
 
Albert ARIBAUD
- [U-Boot] [PATCH] board sc3: fix warning about nested comment
 
Jeroen Hofstee
- [U-Boot] NOR NAND Interference question
 
Andrei
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
 
Kim Phillips
- [U-Boot] [PATCH] arm:exynos4:pinmux: Modify the gpio function	for mmc
 
Minkyu Kang
- [U-Boot] [PATCH] tegra30: fix UART2 pinmux table entry
 
Allen Martin
- [U-Boot] [PATCH v2] video:cache:fix: Enable dcache flush at LCD subsystem for Exynos based boards
 
Minkyu Kang
- [U-Boot] Selecting from multiple device trees at runtime
 
Curt Brune
- [U-Boot] [PATCH] powerpc/85xx: select -mcpu=8540 to match -Wa, e500
 
Scott Wood
- [U-Boot] [PATCH V2] fs: fat: Fix mkcksum() function parameters
 
Aaron Williams
- [U-Boot] [PATCH] powerpc: fix 8xx and 82xx type-punning warnings	with GCC 4.7
 
Scott Wood
- [U-Boot] [PATCH] fdt: fix dts preprocessor options
 
Allen Martin
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host configuration
 
Barry Grussling
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
 
Barry Grussling
- [U-Boot] [PATCH] tegra30: fix UART2 pinmux table entry
 
Stephen Warren
- [U-Boot] [PATCH] fdt: fix dts preprocessor options
 
Stephen Warren
- [U-Boot] [PATCH V6 0/4] Add support for FIMD and DP on SMDK5250
 
Ajay Kumar
- [U-Boot] [PATCH V6 1/4] EXYNOS5: Change parent clock of FIMD to MPLL
 
Ajay Kumar
- [U-Boot] [PATCH V6 2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM
 
Ajay Kumar
- [U-Boot] [PATCH V6 3/4] video: Modify exynos_fimd driver to support	LCD console
 
Ajay Kumar
- [U-Boot] [PATCH 4/4] EXYNOS5: Add support for FIMD and DP
 
Ajay Kumar
- [U-Boot] [PATCH 0/3 V5] EXYNOS5: MAX77686 add FDT support
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: FDT: Add compatible strings for	PMIC
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V5] EXYNOS5: Add device node for PMIC
 
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V5] PMIC: MAX77686: Add FDT Support
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2] net: Remove call of srand from	eth_random_enetaddr()
 
Christian Riesch
- [U-Boot] [U-Boot Web-Documentation misses command nand]
 
Christoph Petzold
- [U-Boot] [PATCH 2/2] calimain: Generate random MAC address for factory tests
 
Christian Riesch
- [U-Boot] [PATCH 1/2] net: Remove call of srand from	eth_random_enetaddr()
 
Wolfgang Denk
- [U-Boot] [PATCH 2/2] calimain: Generate random MAC address for	factory tests
 
Wolfgang Denk
- [U-Boot] [PATCH V2] fs: fat: Fix mkcksum() function parameters
 
Marek Vasut
- [U-Boot] [PATCH v4 0/6] Improve default environment for easy use
 
Otavio Salvador
- [U-Boot] [PATCH v4 1/6] mx6qsabrelite: Use tabs to environment	setting
 
Otavio Salvador
- [U-Boot] [PATCH v4 2/6] mx28evk: We shouldn't hardcode a rootfs	filesystem type
 
Otavio Salvador
- [U-Boot] [PATCH v4 3/6] mx28evk: Add support to dynamically choose	between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v4 4/6] mx53loco: Add support to dynamically choose	between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v4 5/6] mx6qsabrelite: Add support to dynamically	choose between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v4 6/6] mx6qsabre{auto,	sd}: Add support to dynamically choose between ftd use or not
 
Otavio Salvador
- [U-Boot] uboot and Ethernet Controller issue
 
Wolfgang Denk
- [U-Boot] [PATCH v4 3/6] mx28evk: Add support to dynamically choose between ftd use or not
 
Fabio Estevam
- [U-Boot] [PATCH v4 3/6] mx28evk: Add support to dynamically choose between ftd use or not
 
Otavio Salvador
- [U-Boot] [PATCH v5 0/6] Improve default environment for easy use
 
Otavio Salvador
- [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to environment	setting
 
Otavio Salvador
- [U-Boot] [PATCH v5 2/6] mx28evk: We shouldn't hardcode a rootfs	filesystem type
 
Otavio Salvador
- [U-Boot] [PATCH v5 3/6] mx28evk: Add support to dynamically choose	between fdt use or not
 
Otavio Salvador
- [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose	between fdt use or not
 
Otavio Salvador
- [U-Boot] [PATCH v5 5/6] mx6qsabrelite: Add support to dynamically	choose between fdt use or not
 
Otavio Salvador
- [U-Boot] [PATCH v5 6/6] mx6qsabre{auto,	sd}: Add support to dynamically choose between fdt use or not
 
Otavio Salvador
- [U-Boot] [PATCH v5 1/6] mx6qsabrelite: Use tabs to	environment	setting
 
Liu Hui-R64343
- [U-Boot] [PATCH v5 5/6] mx6qsabrelite: Add support to dynamically	choose between fdt use or not
 
Liu Hui-R64343
- [U-Boot] [PATCH v5 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not
 
Liu Hui-R64343
- [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose	between fdt use or not
 
Liu Hui-R64343
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
 
Tom Rini
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec	phyCORE-AM335x
 
Lars Poeschel
- [U-Boot] Pull request: u-boot-arm/master
 
Albert ARIBAUD
- [U-Boot] [PATCH] mx51evk: Let Add DVI output support
 
Fabio Estevam
- [U-Boot] [PATCH v2] mx51evk: Add DVI output support
 
Fabio Estevam
- [U-Boot] [PATCH v3] mx53loco: Add support for SEIKO 4.3'' WVGA panel
 
Fabio Estevam
- [U-Boot] Regarding M29W128GL Support in u-boot
 
Ramesh K Khokhani
- [U-Boot] problem displaying bitmap on i.MX6
 
Carolyn Smith
- [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
 
Andreas Bießmann
- [U-Boot] [PATCH V2] drivers/block/systemace - added missing	"else" in "ace_writew"
 
Michal Simek
- [U-Boot] [PATCH] tegra30: fix UART2 pinmux table entry
 
Allen Martin
- [U-Boot] [PATCH] tegra30: cardhu: fix UART2 pinmux settings
 
Allen Martin
- [U-Boot] [PATCH v5 4/6] mx53loco: Add support to dynamically choose between fdt use or not
 
Stefano Babic
- [U-Boot] [PATCH v3] mx6: Add workaround for ARM errata
 
Stefano Babic
- [U-Boot] [PATCH v3] mx53loco: Add support for SEIKO 4.3'' WVGA	panel
 
Stefano Babic
- [U-Boot] [PATCH] tegra30: fix UART2 pinmux table entry
 
Stephen Warren
- [U-Boot] [PATCH] tegra30: cardhu: fix UART2 pinmux settings
 
Stephen Warren
- [U-Boot] [PATCH] tegra30: cardhu: fix UART2 pinmux settings
 
Allen Martin
- [U-Boot] [PULL] Please pull u-boot-atmel/master
 
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
 
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
 
Tom Rini
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
 
Scott Wood
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for	SDHCI_send_command()
 
Wolfgang Denk
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
 
Wolfgang Denk
- [U-Boot] [U-Boot Web-Documentation misses command nand]
 
Wolfgang Denk
- [U-Boot] [PATCH] tegra: remove IRDA pinmux synonym
 
Allen Martin
- [U-Boot] [PATCH] tegra: remove IRDA pinmux synonym
 
Stephen Warren
- [U-Boot] [PATCH][v4] powerpc/mpc8xxxx: FSL DDR debugger auto run of stored commands
 
York Sun
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
 
Tom Rini
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
 
Doug Anderson
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
 
Scott Wood
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
 
Scott Wood
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
 
Simon Glass
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
 
Tom Rini
- [U-Boot] [PATCH] Make patman usable outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH] Fix SPL build for non-ARM targets
 
Scott Wood
- [U-Boot] [PATCH][v4] powerpc/mpc8xxxx: FSL DDR debugger auto run of stored commands
 
York Sun
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
 
Doug Anderson
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH] patman: Allow use outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH v2] patman: Allow use outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH 0/3 V5] EXYNOS5: MAX77686 add FDT support
 
Minkyu Kang
- [U-Boot] [PATCH V6 0/4] Add support for FIMD and DP on SMDK5250
 
Minkyu Kang
- [U-Boot] [PATCH v2] patman: Allow use outside of u-boot tree
 
Doug Anderson
- [U-Boot] [PATCH v3] patman: Allow use outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH v4] patman: Allow use outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [RFC] Is anyone interested IPv6 support for u-boot
 
Chris Packham
- [U-Boot] [PATCH] MPC8308: Fixup clocks in PCI Host configuration
 
Barry Grussling
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
 
Jaehoon Chung
- [U-Boot] [PATCH 0/3 V5] EXYNOS5: MAX77686 add FDT support
 
Rajeshwari Birje
- [U-Boot] [PATCH 0/4 V2] SMDK5250: Convert lowlevel_init.S to .c and set PMIC values
 
Rajeshwari Birje
- [U-Boot] [PATCH v4] patman: Allow use outside of u-boot tree
 
Doug Anderson
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec	phyCORE-AM335x
 
Lars Poeschel
- [U-Boot] [PATCH 1/2] EXYNOS5: Make all display related code dependent on CONFIG_LCD
 
Ajay Kumar
- [U-Boot] [PATCH 2/2] EXYNOS5: Enable console multiplexing in u-boot when LCD support is enabled
 
Ajay Kumar
- [U-Boot] Regarding M29W128GL Support in u-boot
 
Stefan Roese
- [U-Boot] Pull request for u-boot-marvell.git
 
Albert ARIBAUD
- [U-Boot] NAND flash -  bad blocks
 
Dimitar Penev
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO	LED
 
Javier Martinez Canillas
- [U-Boot] patches status
 
Angelo Dureghello
- [U-Boot] [PATCH] powerpc/mpc85xx: Add property 'fsl,	sec-era' in device tree node 'crypto'.
 
Vakul Garg
- [U-Boot] patches status
 
Stefan Roese
- [U-Boot] [PATCH] powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'.
 
Tabi Timur-B04825
- [U-Boot] [RFC 3/3] MIPS: bootm.c: integrate QEMU specific	functions
 
Gabor Juhos
- [U-Boot] [RFC 3/3] MIPS: bootm.c: integrate QEMU specific	functions
 
Daniel Schwierzeck
- [U-Boot] [PATCH 1/1] mtd/cfi: add support for SST 4KB sector	granularity
 
Stefan Roese
- [U-Boot] [PATCH] mx6qsabresd: Fix mmc boot by making USDHC3 be 'dev	0'
 
Fabio Estevam
- [U-Boot] [PATCH 1/4] cfi_flash: Add manufact_match helper	function
 
Stefan Roese
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and	write	instructions
 
Langer Thomas (LQDE RD ST PON SW)
- [U-Boot] Please pull u-boot-cfi-flash/master
 
Stefan Roese
- [U-Boot] [PATCH] mx6qsabresd: Fix mmc boot by making USDHC3 be 'dev	0'
 
Benoît Thébaudeau
- [U-Boot] [RFC PATCH 0/22] RFC: image: Reduce code duplication and	refactor
 
Simon Glass
- [U-Boot] [RFC PATCH 01/22] sandbox: Allow -c argument to provide a	command list
 
Simon Glass
- [U-Boot] [RFC PATCH 02/22] sandbox: Support 'source' command
 
Simon Glass
- [U-Boot] [RFC PATCH 03/22] fs: Add support for saving data to	filesystems
 
Simon Glass
- [U-Boot] [RFC PATCH 04/22] sandbox: fs: Add support for saving	files to host filesystem
 
Simon Glass
- [U-Boot] [RFC PATCH 05/22] image: Split libfdt code into image-fdt.c
 
Simon Glass
- [U-Boot] [RFC PATCH 06/22] image: Add device tree setup to image	library
 
Simon Glass
- [U-Boot] [RFC PATCH 07/22] arm: Refactor bootm to reduce #ifdefs
 
Simon Glass
- [U-Boot] [RFC PATCH 08/22] arm: Use image_setup_linux() instead of	local code
 
Simon Glass
- [U-Boot] [RFC PATCH 09/22] powerpc: Use image_setup_linux() instead	of local code
 
Simon Glass
- [U-Boot] [RFC PATCH 10/22] m68k: Use image_setup_linux() instead of	local code
 
Simon Glass
- [U-Boot] [RFC PATCH 11/22] sparc: Use image_setup_linux() instead	of local code
 
Simon Glass
- [U-Boot] [RFC PATCH 12/22] bootstage: Introduce sub-IDs for use	with image loading
 
Simon Glass
- [U-Boot] [RFC PATCH 13/22] mkimage: Add map_sysmem() and	IH_ARCH_DEFAULT to simplfy building
 
Simon Glass
- [U-Boot] [RFC PATCH 14/22] image: Introduce fit_image_load() to	load images from FITs
 
Simon Glass
- [U-Boot] [RFC PATCH 15/22] image: Use fit_image_load() to load	ramdisk
 
Simon Glass
- [U-Boot] [RFC PATCH 16/22] image: Use fit_image_load() to load FDT
 
Simon Glass
- [U-Boot] [RFC PATCH 17/22] sandbox: Adjust bootm command to work	with sandbox
 
Simon Glass
- [U-Boot] [RFC PATCH 18/22] image: Use fit_image_load() to load	kernel
 
Simon Glass
- [U-Boot] [RFC PATCH 19/22] sandbox: image: Adjust FIT image	printing to work with sandbox
 
Simon Glass
- [U-Boot] [RFC PATCH 20/22] bootstage: Remove unused entries related	to kernel/ramdisk/fdt load
 
Simon Glass
- [U-Boot] [RFC PATCH 21/22] sandbox: image: Create a test for	loading FIT images
 
Simon Glass
- [U-Boot] [RFC PATCH 22/22] WIP: sandbox: config: Remove boot command
 
Simon Glass
- [U-Boot] [PATCH 2/3 V4] EXYNOS5: Add device node for PMIC
 
Simon Glass
- [U-Boot] [PATCH 3/3 V4] PMIC: MAX77686: Add FDT Support
 
Simon Glass
- [U-Boot] [PATCH 2/2] pcm051: Add support for Phytec phyCORE-AM335x
 
Tom Rini
- [U-Boot] [PATCH V4 2/9] EXYNOS5: FDT: Add DWMMC device node data
 
Simon Glass
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Simon Glass
- [U-Boot] [PATCHv1] powerpc/mpc85xx: Add property 'fsl,	sec-era' in device tree node 'crypto'.
 
Vakul Garg
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Simon Glass
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock	divisor
 
Simon Glass
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO	LED
 
Tom Rini
- [U-Boot] [PATCH] mx6qsabresd: Fix mmc boot by making USDHC3 be 'dev 0'
 
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabresd: Fix booting the kernel from SDHC3
 
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabresd: Fix booting the kernel from SDHC3
 
Otavio Salvador
- [U-Boot] [RFC 3/3] MIPS: bootm.c: integrate QEMU specific	functions
 
Gabor Juhos
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO	LED
 
Javier Martinez Canillas
- [U-Boot] [PATCH v2] mx6qsabresd: Fix booting the kernel from SDHC3
 
Fabio Estevam
- [U-Boot] [PATCH V4 8/9] SMDK5250: Enable EMMC booting
 
Simon Glass
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC	booting and to
 
Simon Glass
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
 
Simon Glass
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
 
Lukasz Majewski
- [U-Boot] [PATCH 1/2] EXYNOS5: Make all display related code	dependent on CONFIG_LCD
 
Simon Glass
- [U-Boot] [PATCH v4] patman: Allow use outside of u-boot tree
 
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS5: Enable console multiplexing in u-boot when LCD support is enabled
 
Simon Glass
- [U-Boot] [PATCH v2] mx6qsabresd: Fix booting the kernel from	SDHC3
 
Otavio Salvador
- [U-Boot] [PATCH 1/4 V2] EXYNOS: Add functions for power	initialisation
 
Simon Glass
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO	LED
 
Tom Rini
- [U-Boot] [PATCH v4] patman: Allow use outside of u-boot tree
 
Vadim Bendebury
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to	lowlevel_init.c
 
Simon Glass
- [U-Boot] [PATCH v2] mx6qsabresd: Fix booting the kernel from	SDHC3
 
Fabio Estevam
- [U-Boot] [PATCH 3/4 V2] SMDK5250: Add PMIC voltage settings
 
Simon Glass
- [U-Boot] [PATCH v3] SMDK5250: Enable VBus for USB 2.0 controller
 
Simon Glass
- [U-Boot] [PATCH v3] SMDK5250: Enable VBus for USB 2.0 controller
 
Simon Glass
- [U-Boot] [PATCH v3] mx6qsabresd: Fix booting the kernel from SDHC3
 
Fabio Estevam
- [U-Boot] [RFC] Is anyone interested IPv6 support for u-boot
 
Joe Hershberger
- [U-Boot] NAND flash - bad blocks
 
Scott Wood
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO	LED
 
Javier Martinez Canillas
- [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO	LED
 
Tom Rini
- [U-Boot] [PATCH v6 0/6] Improve default environment for easy use
 
Otavio Salvador
- [U-Boot] [PATCH v6 1/6] mx6qsabrelite: Use tabs to environment	setting
 
Otavio Salvador
- [U-Boot] [PATCH v6 2/6] mx28evk: We shouldn't hardcode a rootfs	filesystem type
 
Otavio Salvador
- [U-Boot] [PATCH v6 3/6] mx28evk: Add support to dynamically choose	between fdt use or not
 
Otavio Salvador
- [U-Boot] [PATCH v6 4/6] mx53loco: Add support to dynamically choose	between fdt use or not
 
Otavio Salvador
- [U-Boot] [PATCH v6 5/6] mx6qsabrelite: Add support to dynamically	choose between fdt use or not
 
Otavio Salvador
- [U-Boot] [PATCH v6 6/6] mx6qsabre{auto,	sd}: Add support to dynamically choose between fdt use or not
 
Otavio Salvador
- [U-Boot] [PATCH v6 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or not
 
Fabio Estevam
- [U-Boot] [RFC] Is anyone interested IPv6 support for u-boot
 
Chris Packham
- [U-Boot] bootm: relocate names of sub-command table for archs with CONFIG_NEEDS_MANUAL_RELOC
 
Tom Rini
- [U-Boot] Please pull u-boot-cfi-flash/master
 
Tom Rini
- [U-Boot] [STATUS] v2013.01-rc3 out
 
Tom Rini
- [U-Boot] [PATCH] Makefile: remove MLO.byteswap on clobber
 
Nishanth Menon
- [U-Boot] [PATCH v2 01/10] arm: move flush_dcache_all() to just before disable cache
 
Albert ARIBAUD
- [U-Boot] [RFC] Is anyone interested IPv6 support for u-boot
 
Joe Hershberger
- [U-Boot] e1000 : Correct Rx Threshold Granularity
 
Darcy Watkins
- [U-Boot] Please pull u-boot-ti/master
 
Tom Rini
- [U-Boot] [PATCH 01/12] cmd_sf: Add wr_inst argument to 'sf	write' command
 
Simon Glass
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write	instructions
 
Simon Glass
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write	instructions
 
Simon Glass
- [U-Boot] [PATCH 05/12] cmd_sf: Define a functions for parsing read and write instructions
 
Simon Glass
- [U-Boot] [PATCH 12/12] sf: Pass rd_qeb_req variable as 0 for status and config reg reads
 
Simon Glass
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
 
Simon Glass
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write	instructions
 
Simon Glass
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock	divisor
 
Jaehoon Chung
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC	booting and to
 
Jaehoon Chung
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Jaehoon Chung
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Jaehoon Chung
- [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI
 
Satendra Pratap
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC	booting and to
 
Simon Glass
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Simon Glass
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Simon Glass
- [U-Boot] [PATCH 4/4 V2] SMDK5250: Modify IRAM stack pointer	address
 
Simon Glass
- [U-Boot] [PATCH 2/3 V5] EXYNOS5: Add device node for PMIC
 
Simon Glass
- [U-Boot] [PATCH 3/3 V5] PMIC: MAX77686: Add FDT Support
 
Simon Glass
- [U-Boot] [PATCH V2 1/2] EXYNOS5: Make all display related code dependent on CONFIG_LCD
 
Ajay Kumar
- [U-Boot] [PATCH V2 2/2] EXYNOS5: Enable console multiplexing in	u-boot
 
Ajay Kumar
- [U-Boot] [PATCH] mx6qsabreauto: enable USB host interface
 
Dirk Behme
- [U-Boot] [STATUS] v2013.01-rc3 out
 
Lukasz Majewski
- [U-Boot] BDI3000 - Unprotect flash sectors
 
Waibel Georg
- [U-Boot] About fixup_memory_node()
 
Dennis Lan (dlan)
- [U-Boot] About fixup_memory_node()
 
Dennis Lan (dlan)
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to	lowlevel_init.c
 
Minkyu Kang
- [U-Boot] [PATCH v2 01/10] arm: move flush_dcache_all() to just before disable cache
 
R Sricharan
- [U-Boot] [PATCH 1/2] Exynos: clock: support get_mmc_clk for	exynos
 
Minkyu Kang
- [U-Boot] [PATCH 2/2] Exynos: clock: add CLK_DIV_FSYS3 at	set_mmc_clk
 
Minkyu Kang
- [U-Boot] [PATCH v5 07/20] env: Add support for callbacks to environment vars
 
Stefan Roese
- [U-Boot] e1000 : Correct Rx Threshold Granularity
 
Anatolij Gustschin
- [U-Boot] [PATCH V2 1/2] EXYNOS5: Make all display related code dependent on CONFIG_LCD
 
Minkyu Kang
- [U-Boot] [PATCH V2 2/2] EXYNOS5: Enable console multiplexing in	u-boot
 
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
 
Minkyu Kang
- [U-Boot] NAND flash - bad blocks
 
Dimitar Penev
- [U-Boot] [PATCH] usb: ehci: exynos: Enable non-dt path
 
Vivek Gautam
- [U-Boot] [PATCH] mx6qsabreauto: enable USB host interface
 
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabreauto: enable USB host interface
 
Stefano Babic
- [U-Boot] BDI3000 - Unprotect flash sectors
 
Stefan Roese
- [U-Boot] [PATCH] usb: ehci: exynos: Enable non-dt path
 
Marek Vasut
- [U-Boot] [PATCH] usb: ehci: exynos: Enable non-dt path
 
Vivek Gautam
- [U-Boot] [RFC PATCH 2/2] USB: xHCI: Add stack support for xHCI
 
Vivek Gautam
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to	lowlevel_init.c
 
Rajeshwari Birje
- [U-Boot] [PATCH] EXYNOS5: Add L2 Cache Support.
 
Rajeshwari Birje
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to	lowlevel_init.c
 
Rajeshwari Birje
- [U-Boot] [PATCH v2 1/3] am33xx: add a pulldown macro to pinmux	config
 
Lars Poeschel
- [U-Boot] [PATCH v2 2/3] pcm051: Add support for Phytec	phyCORE-AM335x
 
Lars Poeschel
- [U-Boot] [PATCH v2 3/3] am335x: display msg when reading MAC from	efuse
 
Lars Poeschel
- [U-Boot] [RFC PATCH 01/22] sandbox: Allow -c argument to	provide a command list
 
Marek Vasut
- [U-Boot] [RFC PATCH 02/22] sandbox: Support 'source' command
 
Marek Vasut
- [U-Boot] [RFC PATCH 03/22] fs: Add support for saving data to	filesystems
 
Marek Vasut
- [U-Boot] [RFC PATCH 04/22] sandbox: fs: Add support for saving	files to host filesystem
 
Marek Vasut
- [U-Boot] [RFC PATCH 07/22] arm: Refactor bootm to reduce #ifdefs
 
Marek Vasut
- [U-Boot] [RFC PATCH 09/22] powerpc: Use image_setup_linux()	instead of local code
 
Marek Vasut
- [U-Boot] [RFC PATCH 08/22] arm: Use image_setup_linux() instead	of local code
 
Marek Vasut
- [U-Boot] [RFC PATCH 10/22] m68k: Use image_setup_linux()	instead of local code
 
Marek Vasut
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Amarendra Reddy
- [U-Boot] [PATCH 01/18] mxs: mmc: Drop unused members from struct	mxsmmc_priv
 
Marek Vasut
- [U-Boot] [PATCH 02/18] mxs: ssp: Pull out the SSP bus to regs	conversion
 
Marek Vasut
- [U-Boot] [PATCH 03/18] mxs: clock: Use 'mxs' prefix for methods
 
Marek Vasut
- [U-Boot] [PATCH 04/18] mx23: Add register base addresses
 
Marek Vasut
- [U-Boot] [PATCH 05/18] mx23: Add iomux-mx23.h
 
Marek Vasut
- [U-Boot] [PATCH 06/18] mx23: Add POWER and CLKCTRL register	definitions
 
Marek Vasut
- [U-Boot] [PATCH 07/18] mx23: ssp: Fix ssp-regs.h for MX23
 
Marek Vasut
- [U-Boot] [PATCH 08/18] mx23: Add support on print_cpuinfo()
 
Marek Vasut
- [U-Boot] [PATCH 09/18] mx23: Add boot mode description
 
Marek Vasut
- [U-Boot] [PATCH 10/18] mx23: SPL: Add boot mode support
 
Marek Vasut
- [U-Boot] [PATCH 11/18] mx23: SPL: Initialize DDR at 133MHz
 
Marek Vasut
- [U-Boot] [PATCH 12/18] mx23: config: Enable building of u-boot.sb	binary
 
Marek Vasut
- [U-Boot] [PATCH 13/18] mx23: config: Enable mxsboot tool for i.MX23	based boards
 
Marek Vasut
- [U-Boot] [PATCH 14/18] mmc: Limit the number of used SSP ports on	MX23
 
Marek Vasut
- [U-Boot] [PATCH 15/18] mxs: Add MX23 quirks into the clock code
 
Marek Vasut
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
 
Marek Vasut
- [U-Boot] [PATCH 17/18] mxs: Add function to ungate the power block	on MX23
 
Marek Vasut
- [U-Boot] [PATCH 18/18] mxs: Fix the memory init for MX23
 
Marek Vasut
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock	divisor
 
Amarendra Reddy
- [U-Boot] BDI3000 - Unprotect flash sectors
 
Marek Vasut
- [U-Boot] [STATUS] v2013.01-rc3 out
 
Marek Vasut
- [U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
 
Marek Vasut
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to
 
Amarendra Reddy
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to	lowlevel_init.c
 
Simon Glass
- [U-Boot] [RFC PATCH 03/22] fs: Add support for saving data to	filesystems
 
Simon Glass
- [U-Boot] [PATCH V4 5/9] EXYNOS5: DWMMC: API to set mmc clock	divisor
 
Simon Glass
- [U-Boot] [PATCH V4 9/9] COMMON: MMC: Command to support EMMC booting and to
 
Simon Glass
- [U-Boot] [PATCH] usb: ehci: exynos: Enable non-dt path
 
Simon Glass
- [U-Boot] [U-Boot, 1/1] OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_NAND_SUPPORT
 
Tom Rini
- [U-Boot] Makefile: remove MLO.byteswap on clobber
 
Tom Rini
- [U-Boot] [U-Boot, 1/2] serial/ns16550: add an option to avoid hanging on broken platforms
 
Tom Rini
- [U-Boot] [U-Boot,	2/2] OMAP3: igep00x0: add CONFIG_SYS_NS16550_BROKEN_TEMT
 
Tom Rini
- [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
 
Jens Scharsig
- [U-Boot] [STATUS] v2013.01-rc3 out
 
Jens Scharsig
- [U-Boot] [PATCH] mmc:sdhci:fix: Change default interrupts enabled at SDHCI initialization
 
Lukasz Majewski
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
 
Lukasz Majewski
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
 
Lukasz Majewski
- [U-Boot] [RFC PATCH 03/22] fs: Add support for saving data to	filesystems
 
Simon Glass
- [U-Boot] [RFC PATCH 07/22] arm: Refactor bootm to reduce #ifdefs
 
Simon Glass
- [U-Boot] csb1724 88f6282
 
Mario Schuknecht
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
 
Jagan Teki
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
 
Simon Glass
- [U-Boot] USB driver on MPC8555E controller on a Non-RTOS project
 
Srijith
- [U-Boot] Please pull u-boot-ti/master
 
Albert ARIBAUD
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
 
Amarendra Reddy
- [U-Boot] [PATCH 0/7] tegra: SPI drivers
 
Allen Martin
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
 
Allen Martin
- [U-Boot] [PATCH 2/7] tegra: spi: add fdt support to tegra SPI	SFLASH driver
 
Allen Martin
- [U-Boot] [PATCH 3/7] tegra30: add SBC1 to periph id mapping table
 
Allen Martin
- [U-Boot] [PATCH 4/7] tegra30: fdt: add SPI SLINK nodes
 
Allen Martin
- [U-Boot] [PATCH 5/7] tegra: add addresses of SPI SLINK controllers
 
Allen Martin
- [U-Boot] [PATCH 6/7] tegra: add SPI SLINK driver
 
Allen Martin
- [U-Boot] [PATCH 7/7] tegra: cardhu: config: enable SPI
 
Allen Martin
- [U-Boot] NAND flash - bad blocks
 
Scott Wood
- [U-Boot] [PATCH] configs: omap4_common: support load from uEnv.txt
 
Nishanth Menon
- [U-Boot] [PATCH] configs: omap4_common: support load from	uEnv.txt
 
Nishanth Menon
- [U-Boot] [PATCH v2 1/1] omap4: allow the use of a plain text env file instead boot scripts
 
Nishanth Menon
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
 
Fabio Estevam
- [U-Boot] please pull u-boot-samsung master
 
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
 
Albert ARIBAUD
- [U-Boot] [PATCH V3 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
 
Troy Kisky
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
 
Marek Vasut
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
 
Marek Vasut
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
 
Marek Vasut
- [U-Boot] Pull request: u-boot-arm/master
 
Tom Rini
- [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
 
Tom Rini
- [U-Boot] Moving from 1.1.6 to 2012.07 for Coldfire help
 
Steve deRosier
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
 
Stephen Warren
- [U-Boot] [PATCH 2/7] tegra: spi: add fdt support to tegra SPI	SFLASH driver
 
Stephen Warren
- [U-Boot] [PATCH 4/7] tegra30: fdt: add SPI SLINK nodes
 
Stephen Warren
- [U-Boot] [PATCH 6/7] tegra: add SPI SLINK driver
 
Stephen Warren
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
 
Allen Martin
- [U-Boot] [PATCH 2/7] tegra: spi: add fdt support to tegra SPI SFLASH driver
 
Allen Martin
- [U-Boot] [PATCH 4/7] tegra30: fdt: add SPI SLINK nodes
 
Allen Martin
- [U-Boot] [PATCH 6/7] tegra: add SPI SLINK driver
 
Allen Martin
- [U-Boot] BDI3000 - Unprotect flash sectors
 
Sinan Akman
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
 
Stephen Warren
- [U-Boot] [PATCH 1/7] tegra: fdt: add apbdma node
 
Allen Martin
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Dirk Heinrichs
- [U-Boot] please pull u-boot-samsung master
 
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/9] tegra: SPI drivers
 
Allen Martin
- [U-Boot] [PATCH v2 1/9] tegra: fdt: sort dts files
 
Allen Martin
- [U-Boot] [PATCH v2 2/9] tegra: fdt: add apbdma node
 
Allen Martin
- [U-Boot] [PATCH v2 3/9] tegra20: fdt: add SPI SFLASH node
 
Allen Martin
- [U-Boot] [PATCH v2 4/9] tegra: spi: add fdt support to tegra SPI	SFLASH driver
 
Allen Martin
- [U-Boot] [PATCH v2 5/9] tegra30: add SBC1 to periph id mapping table
 
Allen Martin
- [U-Boot] [PATCH v2 6/9] tegra30: fdt: add SPI SLINK nodes
 
Allen Martin
- [U-Boot] [PATCH v2 7/9] tegra: add addresses of SPI SLINK	controllers
 
Allen Martin
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
 
Allen Martin
- [U-Boot] [PATCH v2 9/9] tegra: cardhu: config: enable SPI
 
Allen Martin
- [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
 
Andreas Bießmann
- [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support
 
Albert ARIBAUD
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
 
Otavio Salvador
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
 
Otavio Salvador
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
 
Otavio Salvador
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Wolfgang Denk
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
 
Marek Vasut
- [U-Boot] [PATCH 16/18] mxs: Add MX23 olinuxino board support
 
Marek Vasut
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
 
Marek Vasut
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
 
Otavio Salvador
- [U-Boot] [PATCH v2 01/10] arm: move flush_dcache_all() to just before disable cache
 
Simon Glass
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
 
Otavio Salvador
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
 
Simon Glass
- [U-Boot] [PATCH v2 1/9] tegra: fdt: sort dts files
 
Simon Glass
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
 
Marek Vasut
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
 
Simon Glass
- [U-Boot] [PATCH v2 9/9] tegra: cardhu: config: enable SPI
 
Simon Glass
- [U-Boot] [PATCH v2 5/9] tegra30: add SBC1 to periph id mapping	table
 
Simon Glass
- [U-Boot] [PATCH v2 7/9] tegra: add addresses of SPI SLINK	controllers
 
Simon Glass
- [U-Boot] [PATCH v2 6/9] tegra30: fdt: add SPI SLINK nodes
 
Simon Glass
- [U-Boot] [PATCH] fdt: fix dts preprocessor options
 
Simon Glass
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
 
Simon Glass
- [U-Boot] [PATCH 16/18 V2] mxs: Add MX23 olinuxino board support
 
Otavio Salvador
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
 
Simon Glass
- [U-Boot] [PATCH 16/18 V3] mxs: Add MX23 olinuxino board support
 
Marek Vasut
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Simon Glass
- [U-Boot] [RFC PATCH 0/4] RFC: FIT images and device tree on x86
 
Simon Glass
- [U-Boot] [RFC PATCH 1/4] x86: Enable LMB and RAMDISK_HIGH by default
 
Simon Glass
- [U-Boot] [RFC PATCH 2/4] x86: Rewrite bootm.c to make it similar to	ARM
 
Simon Glass
- [U-Boot] [RFC PATCH 3/4] x86: Allow cmdline setup in setup_zimage()	to be optional
 
Simon Glass
- [U-Boot] [RFC PATCH 4/4] x86: Support loading kernel setup from a	FIT
 
Simon Glass
- [U-Boot] [PATCH] MIPS: bootm.c: drop obsolete Qemu specific bootm	implementation
 
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] MIPS: bootm.c: drop obsolete Qemu specific	bootm implementation
 
Gabor Juhos
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Vadim Bendebury
- [U-Boot] [PATCH] README.qemu-mips: move README file from board to	doc directory
 
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] README.mips: update known issues and TODOs
 
daniel.schwierzeck at gmail.com
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Vincent Palatin
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Dirk Heinrichs
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Jason
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Jeroen Hofstee
- [U-Boot] [PATCH 1/3] pxa: Add support for board specific reset	function
 
Lukasz Dalek
- [U-Boot] [PATCH 2/3] h2200: Add board reset support
 
Lukasz Dalek
- [U-Boot] [PATCH 3/3] pxa: Save lr register in relocate_code function
 
Lukasz Dalek
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Jason Cooper
- [U-Boot] [PATCH 00/10] common.lcd: remove globals and cleanup
 
Jeroen Hofstee
- [U-Boot] [PATCH 01/10] lcd,	amba: remove this frame buffer driver since it is not used
 
Jeroen Hofstee
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
 
Jeroen Hofstee
- [U-Boot] [PATCH 03/10] lcd,	mpc8xx: move the mpc8xx frame buffer driver to drivers/video
 
Jeroen Hofstee
- [U-Boot] [PATCH 04/10] lcd, pxafb: move the pxafb to drivers/video
 
Jeroen Hofstee
- [U-Boot] [PATCH 05/10] common/lcd.c: cleanup use of global variables
 
Jeroen Hofstee
- [U-Boot] [PATCH 06/10] common/lcd.c: remove global lcd_base
 
Jeroen Hofstee
- [U-Boot] [PATCH 07/10] common/lcd: cosmetic: clean up a bit
 
Jeroen Hofstee
- [U-Boot] [PATCH 08/10] lcd, fb: cleanup,	remove prototypes already in lcd.h and unused code
 
Jeroen Hofstee
- [U-Boot] [PATCH 09/10] api/api_display: use the getters for console	size info
 
Jeroen Hofstee
- [U-Boot] [PATCH 10/10] common/lcd.c: move the macro's to the c file
 
Jeroen Hofstee
- [U-Boot] [PATCH 02/10] lcd,	tegra: remove unused cursor functions
 
Jeroen Hofstee
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Jason
- [U-Boot] [PATCH 3/3] pxa: Save lr register in relocate_code	function
 
Marek Vasut
- [U-Boot] [PATCH 2/3] h2200: Add board reset support
 
Marek Vasut
- [U-Boot] [PATCH 04/10] lcd,	pxafb: move the pxafb to drivers/video
 
Marek Vasut
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Gabe Black
- [U-Boot] [PATCH 2/3] h2200: Add board reset support
 
Łukasz Dałek
- [U-Boot] [PATCH 2/3] h2200: Add board reset support
 
Marek Vasut
- [U-Boot] [PATCH v2] h2200: Add board reset support
 
Lukasz Dalek
- [U-Boot] [PATCH] pxa: Add weak attribute to reset_cpu() function
 
Lukasz Dalek
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Tom Wai-Hong Tam (談偉航)
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Bill Richardson
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Dirk Heinrichs
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Albert ARIBAUD
- [U-Boot] [PATCH V3 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
 
Stefano Babic
- [U-Boot] [PATCH v6 4/6] mx53loco: Add support to dynamically choose between fdt use or not
 
Stefano Babic
- [U-Boot] [PATCH v2] mx51evk: Add DVI output support
 
Stefano Babic
- [U-Boot] [PATCH v3] mx6qsabresd: Fix booting the kernel from	SDHC3
 
Stefano Babic
- [U-Boot] [PATCH v6 1/6] mx6qsabrelite: Use tabs to environment	setting
 
Stefano Babic
- [U-Boot] [PATCH] Remove duplication of CONFIG_BOOTCOUNT_LIMIT
 
Ashok Kumar Reddy
- [U-Boot] [PATCH 01/10] lcd, amba: remove this frame buffer driver since it is not used
 
Alessandro Rubini
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Stefan Herbrechtsmeier
- [U-Boot] [PATCH] Remove duplication of CONFIG_BOOTCOUNT_LIMIT
 
Wolfgang Denk
- [U-Boot] Running vanilla u-boot v2012.10 on Guruplug
 
Dirk Heinrichs
- [U-Boot] [PATCH] fix linker generated lists on non-C locales
 
Marek Vasut
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Doug Anderson
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Hung-Te Lin
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Louis Yung-Chieh Lo
- [U-Boot] please pull u-boot-samsung master
 
Rajeshwari Birje
- [U-Boot] please pull u-boot-samsung master
 
Minkyu Kang
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Luigi Semenzato
- [U-Boot] [PATCH] I2C: S3C24X0: Resolve build error for VCMA9
 
Rajeshwari Shinde
- [U-Boot] [PATCH] I2C: S3C24X0: Resolve build error for VCMA9
 
Minkyu Kang
- [U-Boot] [PATCH V2] I2C: S3C24X0: Resolve build error for VCMA9
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to	lowlevel_init.c
 
Rajeshwari Birje
- [U-Boot] [PATCH V2] I2C: S3C24X0: Resolve build error for VCMA9
 
Heiko Schocher
- [U-Boot] [PATCH V2] I2C: S3C24X0: Resolve build error for VCMA9
 
Rajeshwari Birje
- [U-Boot] please pull u-boot-samsung master
 
Albert ARIBAUD
- [U-Boot] [STATUS] v2013.01-rc3 out
 
Nikita Kiryanov
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
 
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
 
Albert ARIBAUD
- [U-Boot] [PATCH 2/4 V2] SMDK5250: Convert lowlevel_init.S to lowlevel_init.c
 
Minkyu Kang
- [U-Boot] [PATCH 0/4 V2] SMDK5250: Convert lowlevel_init.S to .c and set PMIC values
 
Albert ARIBAUD
- [U-Boot] BDI3000 - Unprotect flash sectors
 
Waibel Georg
- [U-Boot] [PULL] : Please pull u-boot-imx
 
Stefano Babic
- [U-Boot] please pull u-boot-samsung master
 
Ajay kumar
- [U-Boot] [PATCH 0/2] video: Fix compilation warnings for exynos	video
 
Ajay Kumar
- [U-Boot] [PATCH 1/2] video: exynos_dp: Remove unused variable	disp_info
 
Ajay Kumar
- [U-Boot] [PATCH 2/2] video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selected
 
Ajay Kumar
- [U-Boot] [PATCH V2] I2C: S3C24X0: Resolve build error for VCMA9
 
Minkyu Kang
- [U-Boot] [PATCH 0/2] video: Fix compilation warnings for exynos	video
 
Minkyu Kang
- [U-Boot] [PULL v2] please pull u-boot-samsung master
 
Minkyu Kang
- [U-Boot] [STATUS] v2013.01-rc3 out
 
Tom Rini
- [U-Boot] [PATCH] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] [PATCH] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] [PATCH] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Sean Paul
- [U-Boot] the boot process breaks.
 
Yann R. Moupinda
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Duncan Laurie
- [U-Boot] [PATCH v3] davinci: cleanup davinci_sync_env_enetaddr()	fucntion
 
Holger Freyther
- [U-Boot] [PATCH] Add DDR3 support for AM335x-EVM (Version 1.5A)
 
Jeff Lance
- [U-Boot] [PULL v2] please pull u-boot-samsung master
 
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx
 
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
 
Albert ARIBAUD
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Bernie Thompson
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Stefan Reinauer
- [U-Boot] [PATCH v2 3/9] tegra20: fdt: add SPI SFLASH node
 
Stephen Warren
- [U-Boot] [PATCH] mx6qsabre_common: Let mmc partition be board	specific
 
Fabio Estevam
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
 
Stephen Warren
- [U-Boot] [PATCH v2 0/9] tegra: SPI drivers
 
Stephen Warren
- [U-Boot] [PATCH] mx6qsabre_common: Let mmc partition be board	specific
 
Otavio Salvador
- [U-Boot] [PATCH v2] mx6qsabre_common: Let mmc partition be board	specific
 
Fabio Estevam
- [U-Boot] [PATCH] lcd: restore ability to display 8 bpp BMPs on 16 bpp LCDs
 
Anatolij Gustschin
- [U-Boot] Limit on length of U_BOOT_VERSION_STRING for mpc85xx
 
Steve Heckman
- [U-Boot] [PATCH v2] VIDEO: better document the correct use of CONFIG_FB_ADDR
 
Anatolij Gustschin
- [U-Boot]  Limit on length of U_BOOT_VERSION_STRING for mpc85xx
 
Steve Heckman
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Sonny Rao
- [U-Boot] [PATCH] watchdog.h: Move hw_watchdog_init prototype to end,	guard
 
Tom Rini
- [U-Boot] Pull request: u-boot-staging
 
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video/master
 
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-staging
 
Tom Rini
- [U-Boot] Pull request: u-boot-video/master
 
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
 
Tom Rini
- [U-Boot] [RFC PATCH 3/4] x86: Allow cmdline setup in	setup_zimage() to be optional
 
Graeme Russ
- [U-Boot] [U-Boot,	3/3] pxa: Save lr register in relocate_code function
 
Tom Rini
- [U-Boot] [PATCH v5 07/20] env: Add support for callbacks to environment vars
 
Joe Hershberger
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host	configuration
 
Kim Phillips
- [U-Boot] [PATCH] board/common: Add support for QIXIS read/write	using i2c
 
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx: Add BSC9132/BSC9232 processor	support
 
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/85xx: Add BSC9132QDS support
 
Prabhakar Kushwaha
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
 
Allen Martin
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
 
Allen Martin
- [U-Boot] [PATCH] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
 
Tabi Timur-B04825
- [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add BSC9132/BSC9232 processor	support
 
Prabhakar Kushwaha
- [U-Boot] [PATCH v5 07/20] env: Add support for callbacks to environment vars
 
Stefan Roese
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host	configuration
 
Gerlando Falauto
- [U-Boot] [PATCH V4 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Amarendra Reddy
- [U-Boot] [PATCH V4 2/9] EXYNOS5: FDT: Add DWMMC device node data
 
Amarendra Reddy
- [U-Boot] [PATCH V4 8/9] SMDK5250: Enable EMMC booting
 
Amarendra Reddy
- [U-Boot] [PATCH V4 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
 
Amarendra Reddy
- [U-Boot] [PATCH 0/2] SMDK5250: Set Initial PMIC Values
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2] EXYNOS5: Add function to setup set ps hold
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2] SMDK5250: Add PMIC voltage settings
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2] phy: export genphy_parse_link()
 
Yegor Yefremov
- [U-Boot] NAND flash - bad blocks
 
Dimitar Penev
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Ramesh K Khokhani
- [U-Boot] [PATCH] README: imximage: mx35 does not boot from internal	mode yet
 
Fabio Estevam
- [U-Boot] [PATCH] README: imximage: mx35 does not boot from internal mode yet
 
Stefano Babic
- [U-Boot] [PATCH] README: imximage: mx35 does not boot from internal mode yet
 
Fabio Estevam
- [U-Boot] [PATCH] README: imximage: mx35 does not boot from internal mode yet
 
Fabio Estevam
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
 
Stephen Warren
- [U-Boot] [U-Boot-Users] standalone code
 
Diego Preciado Barón
- [U-Boot] NAND flash - bad blocks
 
Scott Wood
- [U-Boot] [PATCH 09/10] api/api_display: use the getters for	console size info
 
Che-liang Chiou
- [U-Boot] Googlers please reply: commiters in U-Boot
 
Che-liang Chiou
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host	configuration
 
Ira W. Snyder
- [U-Boot] [U-Boot-Users] standalone code
 
Wolfgang Denk
- [U-Boot] [STATUS] v2013.01 released
 
Tom Rini
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Angelo Dureghello
- [U-Boot] [PATCH 05/10] common/lcd.c: cleanup use of global	variables
 
Bo Shen
- [U-Boot] [PATCH 06/10] common/lcd.c: remove global lcd_base
 
Bo Shen
- [U-Boot] [PATCH] tegra: fdt: remove clocks nodes
 
Allen Martin
- [U-Boot] [PATCH V5 REPOST 1/7] ARM: bcm2835: add mailbox driver
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2/7] ARM: rpi_b: use bcm2835 mbox driver	to get memory size
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 3/7] lcd: calculate line_length after	lcd_ctrl_init()
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 4/7] ARM: rpi_b: disable rpi_b dcache	explicitly
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 5/7] video: add a driver for the bcm2835
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 6/7] mmc: add bcm2835 driver
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 7/7] ARM: rpi_b: enable SD controller,	add related env/cmds
 
Stephen Warren
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Shaohui Xie
- [U-Boot] [PATCH 2/3] powerpc/p5040: enable SD boot support
 
Shaohui Xie
- [U-Boot] [PATCH 3/3] powerpc/p5040: enable SPI boot support
 
Shaohui Xie
- [U-Boot] Function prototype conflicts with standalone apps
 
Chris Packham
- [PATCH] exports.h: add required definitions from common.h
 
Chris Packham
- [RFC/PATCH] common.h: move definitions needed by standalone
 
Chris Packham
- [U-Boot] Function prototype conflicts with standalone apps
 
Chris Packham
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Ramesh K Khokhani
- [U-Boot] [PATCH] m68k: fix debug call befor serial init
 
Jens Scharsig (BuS Elektronik)
- [U-Boot] Function prototype conflicts with standalone apps
 
Albert ARIBAUD (U-Boot)
- [U-Boot] Function prototype conflicts with standalone apps
 
Albert ARIBAUD
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write	instructions
 
Jagan Teki
- [U-Boot] [PATCH] kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
 
Holger Brunck
- [U-Boot] [PATCH 1/3] arm/km: rename BOARD_LATE_INIT to	CONFIG_BOARD_LATE_INIT
 
Holger Brunck
- [U-Boot] [PATCH 2/3] arm/km: use CONFIG_NAND_ECC_BCH
 
Holger Brunck
- [U-Boot] [PATCH 3/3] arm/km: add support for kmsuv31 board
 
Holger Brunck
- [U-Boot] [RFC PATCH 0/2] Initial IPv6 support
 
Chris Packham
- [U-Boot] [RFC PATCH 1/2] Initial net6.h
 
Chris Packham
- [U-Boot] [RFC PATCH 2/2] lib/vsprintf.c: add IPv6 compressed format	%pI6c
 
Chris Packham
- [U-Boot] [GIT PULL] u-boot-mips/master
 
Daniel Schwierzeck
- [U-Boot] Function prototype conflicts with standalone apps
 
Chris Packham
- [U-Boot] [PATH v3 1/2] sf: Add status register reading support
 
Jagan Teki
- [U-Boot] [RFC PATCH 0/2] Initial IPv6 support
 
Chris Packham
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Angelo Dureghello
- [U-Boot] [PATCH] Remove unused CONFIG_SYS_I2C_BUS[_SELECT]
 
Michael Jones
- [U-Boot] configure USB Host1 in U-Boot of iMx53
 
Sarvesh  Gupta
- [U-Boot] [STATUS] v2013.01 released
 
Benoît Thébaudeau
- [U-Boot] configure USB Host1 in U-Boot of iMx53
 
Stefano Babic
- [U-Boot] configure USB Host1 in U-Boot of iMx53
 
Fabio Estevam
- [U-Boot] [PATCH] Remove unused CONFIG_SYS_I2C_BUS[_SELECT]
 
Igor Grinberg
- [U-Boot] [PATCH 1/2] MIPS: use inline directive for __in*s functions
 
Gabor Juhos
- [U-Boot] [PATCH 2/2] MIPS: convert IO port accessor functions to	'static inline'
 
Gabor Juhos
- [U-Boot] [STATUS] v2013.01 released
 
Tom Rini
- [U-Boot] Function prototype conflicts with standalone apps
 
Albert ARIBAUD
- [U-Boot] [PATCH] MIPS: start{,	64}.S: fill branch delay slots with NOP instructions
 
Gabor Juhos
- [U-Boot] [PATCH] MIPS: board.c: fix monitor length calculations
 
Gabor Juhos
- [U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Timur Tabi
- [U-Boot] U-Boot Graphics Library?
 
Simon Glass
- [U-Boot] Flash Not Erased for M29W128GL
 
Ramesh K Khokhani
- [U-Boot] Flash Not Erased for M29W128GL
 
Fabio Estevam
- [U-Boot] Flash Not Erased for M29W128GL
 
Ramesh K Khokhani
- [U-Boot] FW:  Flash Not Erased for M29W128GL
 
Ramesh K Khokhani
- [U-Boot] [PATCH] MIPS: board.c: fix monitor length calculations
 
Gabor Juhos
- [U-Boot] [PATCH v3 00/10] Add Marvell Dove and SolidRun CuBox
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 01/10] ARM: dove: add support for Marvell Dove	SoC
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 02/10] GPIO: add gpio driver for Orion SoCs
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 03/10] MMC: sdhci: Add support for dove sdhci
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 04/10] SPI: Add Orion SPI driver
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 05/10] block: mvsata: add dove include
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 06/10] NET: phy: add 88E1310 PHY initialization
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 07/10] NET: mvgbe: add phylib support
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 08/10] NET: mvgbe: add support for Dove
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 09/10] Boards: Add support for SolidRun CuBox
 
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 10/10] tools: Add support for Dove to kwboot
 
Sebastian Hesselbarth
- [U-Boot] U-Boot Graphics Library?
 
Wolfgang Denk
- [U-Boot] [STATUS] v2013.01 released
 
Wolfgang Denk
- [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions
 
Langer Thomas (LQDE RD ST PON SW)
- [U-Boot] [STATUS] v2013.01 released
 
Wolfgang Denk
- [U-Boot] Function prototype conflicts with standalone apps
 
Chris Packham
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Scott Wood
- [U-Boot] [PATCH 0/7] Add support for NVIDIA Tegra114 SoC
 
Tom Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
 
Tom Warren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
 
Tom Warren
- [U-Boot] [PATCH 3/7] Tegra114: Add CPU (armv7) files
 
Tom Warren
- [U-Boot] [PATCH 4/7] Tegra114: Add common CPU (shared) files
 
Tom Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
 
Tom Warren
- [U-Boot] [PATCH 6/7] Tegra114: Add generic Tegra114 build support
 
Tom Warren
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114	reference board)
 
Tom Warren
- [U-Boot] U-Boot Graphics Library?
 
Simon Glass
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Scott Wood
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
 
Stephen Warren
- [U-Boot] i.MX6 Solo and Dual Lite
 
Eric Nelson
- [U-Boot] [RFC PATCH 1/2] Initial net6.h
 
Kim Phillips
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
 
Allen Martin
- [U-Boot] U-Boot Graphics Library?
 
Wolfgang Denk
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
 
Stephen Warren
- [U-Boot] U-Boot Graphics Library?
 
Andre Renaud
- [U-Boot] [PATCH 4/7] Tegra114: Add common CPU (shared) files
 
Stephen Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
 
Stephen Warren
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
 
Stephen Warren
- [U-Boot] U-Boot Graphics Library?
 
Simon Glass
- [U-Boot] U-Boot Graphics Library?
 
Simon Glass
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
 
Allen Martin
- [U-Boot] [PATCH v2] tegra: fdt: remove clocks nodes
 
Allen Martin
- [U-Boot] [PATCH] tegra: fdt: sort dts files
 
Allen Martin
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
Kim Phillips
- [U-Boot] [PATCH 2/5] libfdt_env.h: add fdt type definitions
 
Kim Phillips
- [U-Boot] [PATCH 3/5] libfdt: update fdt.h from upstream dtc
 
Kim Phillips
- [U-Boot] [PATCH 4/5] libfdt: update from upstream dtc commit 142419e
 
Kim Phillips
- [U-Boot] [PATCH 5/5 v2] common/fdt_support.c: sparse fixes
 
Kim Phillips
- [U-Boot] [PATCH 1/2] net: make IPaddr type big endian
 
Kim Phillips
- [U-Boot] [PATCH 2/2] net/tftp: sparse fixes
 
Kim Phillips
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
Scott Wood
- [U-Boot] [GIT PULL] u-boot-mpc83xx: support for new SPL
 
Kim Phillips
- [U-Boot] [PATCH 0/2] EXYNOS5: Enable Gigabyte device GD25LQ and	GD25Q64B
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2] SF: Add driver for Gigabyte device GD25LQ and	GD25Q64B
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2] EXYNOS5: Enable SPI Gigabyte device.
 
Rajeshwari Shinde
- [U-Boot] USB3.0 support snacs 0 storage device
 
Satendra...
- [U-Boot] Divide uboot into two parts
 
terryhuang
- [U-Boot] U-Boot Graphics Library?
 
Dirk Behme
- [U-Boot] U-Boot Graphics Library?
 
James W.
- [U-Boot] [PATCH] powerpc/p5040: enable PBL tool support
 
Shaohui Xie
- [U-Boot] [PATCH v3 0/7] tegra: SPI drivers
 
Allen Martin
- [U-Boot] [PATCH v3 1/7] tegra20: fdt: add SPI SFLASH node
 
Allen Martin
- [U-Boot] [PATCH v3 2/7] tegra: spi: add fdt support to tegra SPI	SFLASH driver
 
Allen Martin
- [U-Boot] [PATCH v3 3/7] tegra30: add SBC1 to periph id mapping table
 
Allen Martin
- [U-Boot] [PATCH v3 4/7] tegra30: fdt: add SPI SLINK nodes
 
Allen Martin
- [U-Boot] [PATCH v3 5/7] tegra: add addresses of SPI SLINK	controllers
 
Allen Martin
- [U-Boot] [PATCH v3 6/7] tegra: add SPI SLINK driver
 
Allen Martin
- [U-Boot] [PATCH v3 7/7] tegra: cardhu: config: enable SPI
 
Allen Martin
- [U-Boot] Divide uboot into two parts
 
Heiko Schocher
- [U-Boot] Flash Not Erased for M29W128GL
 
Ramesh K Khokhani
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
David Aldrich
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] [PATCH 00/15] updates for km83xx boards
 
Holger Brunck
- [U-Boot] [PATCH 01/15] km/common: remove unneeded ifdefs for I2C
 
Holger Brunck
- [U-Boot] [PATCH 02/15] km/common/ivm: remove obsolete code
 
Holger Brunck
- [U-Boot] [PATCH 03/15] km/common/ivm: remove CONFIG_SYS_I2C_IVM_BUS	related code
 
Holger Brunck
- [U-Boot] [PATCH 04/15] km82xx,	km83xx: move ethernet_present() from common to cpu specific
 
Holger Brunck
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch	support for kmvect1
 
Holger Brunck
- [U-Boot] [PATCH 06/15] powerpc/83xx: use ppc_6xx as arch variable	for kmvect1
 
Holger Brunck
- [U-Boot] [PATCH 07/15] km/common: introduce $uimage variable
 
Holger Brunck
- [U-Boot] [PATCH 08/15] km/scripts: replace hardcoded uImage
 
Holger Brunck
- [U-Boot] [PATCH 09/15] kmeter1_nand: allow usage of	NAND_ECC_SOFT_BCH
 
Holger Brunck
- [U-Boot] [PATCH 10/15] powerpc/83xx: use NAND_ECC_BCH for kmcoge5ne
 
Holger Brunck
- [U-Boot] [PATCH 11/15] km/common: add eccmode to kernel commandline
 
Holger Brunck
- [U-Boot] [PATCH 12/15] powerpc/83xx/km: cleanup tuxx1 support
 
Holger Brunck
- [U-Boot] [PATCH 13/15] powerpc/83xx/km: add support for kmopti2	board
 
Holger Brunck
- [U-Boot] [PATCH 14/15] poweprc/83xx/km: remove uneeded	CONFIG_MISC_INIT_R
 
Holger Brunck
- [U-Boot] [PATCH 15/15] powerpc/83xx/km: drop uneeded dtt_bus	environment var
 
Holger Brunck
- [U-Boot] U-Boot Graphics Library?
 
Wolfgang Denk
- [U-Boot] U-Boot Graphics Library?
 
Wolfgang Denk
- [U-Boot] USB3.0 support snacs 0 storage device
 
Vivek Gautam
- [U-Boot] Irq handler code is not working in u-boot
 
VISWANADHULA BALAJI
- [PATCH] SQUASHME: mtd: nand: Add ecc.strength support to drivers
 
Sergey Lapin
- [PATCH] SQUASHME: mtd: nand: Add ecc.strength support to drivers
 
Sergey Lapin
- [U-Boot] [PATCH 00/15] updates for km83xx boards
 
Prafulla Wadaskar
- [U-Boot] [PATCH 00/15] updates for km83xx boards
 
Holger Brunck
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] [PATCH] powerpc/p5040: add serdes2 memory map register define
 
Tabi Timur-B04825
- [U-Boot] [PATCH] powerpc/p5040: add serdes2 memory map register	define
 
Roy Zang
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
David Aldrich
- [U-Boot] Irq handler code is not working in u-boot
 
Albert ARIBAUD
- [U-Boot] [PATCH 09/15] kmeter1_nand: allow usage of	NAND_ECC_SOFT_BCH
 
Scott Wood
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
 
Tom Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
 
Tom Warren
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
Kim Phillips
- [U-Boot] [PATCH 4/7] Tegra114: Add common CPU (shared) files
 
Tom Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
 
Tom Warren
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
 
Tom Warren
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
Jerry Van Baren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
 
Tom Warren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
 
Tom Warren
- [U-Boot] [PATCH v3 7/7] tegra: cardhu: config: enable SPI
 
Stephen Warren
- [U-Boot] designing a firmware update mechanism
 
John Stile
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
 
Stephen Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
 
Stephen Warren
- [U-Boot] [PATCH 2/7] Tegra114: Add AVP (arm720t) files
 
Stephen Warren
- [U-Boot] [PATCH 1/7] Tegra114: Add arch-tegra114 include files
 
Tom Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
 
Tom Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
 
Stephen Warren
- [U-Boot] [PATCH 5/7] Tegra114: Dalmore: Add DT files
 
Tom Warren
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
David Gibson
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
David Gibson
- [U-Boot] [PATCH 04/15] km82xx, km83xx: move ethernet_present() from common to cpu specific
 
Kim Phillips
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch support for kmvect1
 
Kim Phillips
- [U-Boot] [PATCH V2] MPC8308: Fixup clocks in PCI Host	configuration
 
Kim Phillips
- [U-Boot] U-Boot Graphics Library?
 
Alexander Holler
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Scott Wood
- [U-Boot] cc-list modified?
 
Alexander Holler
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Chris Packham
- [U-Boot] [RFC PATCH v2 1/5] Initial net6.h
 
Chris Packham
- [U-Boot] [RFC PATCH v2 2/5] lib/vsprintf.c: add IPv6 compressed	format %pI6c
 
Chris Packham
- [U-Boot] [RFC PATCH v2 3/5] lib/net_utils.c: make string_to_ip	stricter
 
Chris Packham
- [U-Boot] [RFC PATCH v2 4/5] lib/net_utils.c: add string_to_ip6
 
Chris Packham
- [U-Boot] [RFC PATCH v2 5/5] common.h: add getenv_IP6addr
 
Chris Packham
- [U-Boot] [PATCH V2 1/1] imximage.cfg: run files through C	preprocessor
 
Troy Kisky
- [PATCH] Use the libfdt.h include as the interface definition
 
Gerald Van Baren
- [U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Xie Shaohui-B21989
- [U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Tabi Timur-B04825
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Xie Shaohui-B21989
- [U-Boot] [u-boot-release] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Xie Shaohui-B21989
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Scott Wood
- [U-Boot] cc-list modified?
 
Scott Wood
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
Jim Lin
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Xie Shaohui-B21989
- [U-Boot] B4860/B4420 patches and some updates for qixis and	T4240QDS
 
Aggrwal Poonam-B10812
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
Andrew Dyer
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
Alexander Holler
- [U-Boot] [PATCH][v2] powerpc/p5040: enable NAND/SD/SPI boot support
 
Shaohui Xie
- [U-Boot] [PATCH V2 1/1] imximage.cfg: run files through C preprocessor
 
Albert ARIBAUD
- [U-Boot] [PATCH 04/15] km82xx,	km83xx: move ethernet_present() from common to cpu specific
 
Holger Brunck
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Albert ARIBAUD
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Ramesh K Khokhani
- [U-Boot] U-Boot Graphics Library?
 
Albert ARIBAUD
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch	support for kmvect1
 
Holger Brunck
- [U-Boot] U-Boot Graphics Library?
 
Stefano Babic
- [U-Boot] Booting different kernel from U-Boot based on time stamp
 
Hemal Patel
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Chris Packham
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
David Aldrich
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Sergey Lapin
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Wolfgang Denk
- [U-Boot] [PATCH 1/2] powerpc/82xx/km: make handle_mgcoge3un_reset	static
 
Holger Brunck
- [U-Boot] [PATCH 2/2] powerpc/82xx/km: removed unneeded ifdef
 
Holger Brunck
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
David Aldrich
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Wolfgang Denk
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Josh Wu
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
Alexander Holler
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
Gerald Van Baren
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Sergey Lapin
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
Jerry Van Baren
- [U-Boot] [PATCH 05/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
 
Lucas Stach
- [U-Boot] U-Boot Graphics Library?
 
Simon Glass
- [U-Boot] [PATCH 05/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
 
Simon Glass
- [U-Boot] i.MX6 Solo and Dual Lite
 
Stefano Babic
- [U-Boot] [PATCH 1/3] gpio: Build the da8xx_gpio code for the	davinci644x device
 
Holger Hans Peter Freyther
- [U-Boot] [PATCH 2/3] led: The gpio_led.c code expects that LED	state is from the enum
 
Holger Hans Peter Freyther
- [U-Boot] [PATCH 3/3] mac: Fix the condition check for setting the	MAC from the EEPROM
 
Holger Hans Peter Freyther
- [U-Boot] Slow tftp boot with Ubuntu 12.04 tftp server
 
Steve Strobel
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
 
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
 
Albert ARIBAUD
- [U-Boot] cc-list modified?
 
Alexander Holler
- [U-Boot] [PATCH 1/3] powerpc/p5040: enable NAND boot support
 
Scott Wood
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Joe Hershberger
- [U-Boot] U-Boot Graphics Library?
 
Simon Glass
- [U-Boot] [PATCH 04/15] km82xx, km83xx: move ethernet_present() from common to cpu specific
 
Kim Phillips
- [U-Boot] [PATCH] Tegra: T20: Remove unused 'SLOW' SoC ID and PLLX	table entry
 
Tom Warren
- [U-Boot] [PATCH v2 0/7] Add support for NVIDIA Tegra114 SoC
 
Tom Warren
- [U-Boot] [PATCH v2 1/7] Tegra114: Add arch-tegra114 include files
 
Tom Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
 
Tom Warren
- [U-Boot] [PATCH v2 3/7] Tegra114: Add CPU (armv7) files
 
Tom Warren
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
 
Tom Warren
- [U-Boot] [PATCH v2 5/7] Tegra114: Dalmore: Add DT files
 
Tom Warren
- [U-Boot] [PATCH v2 6/7] Tegra114: Add generic Tegra114 build support
 
Tom Warren
- [U-Boot] [PATCH v2 7/7] Tegra114: Add/enable Dalmore build (T114	reference board)
 
Tom Warren
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch support for kmvect1
 
Kim Phillips
- [U-Boot] [RFC PATCH v2 1/5] Initial net6.h
 
Kim Phillips
- [U-Boot] [PATCH] Tegra: T20: Remove unused 'SLOW' SoC ID and PLLX table entry
 
Stephen Warren
- [U-Boot] [PATCH v2] mtd: resync with Linux-3.7.1
 
Scott Wood
- [U-Boot] [PATCH v2 1/7] Tegra114: Add arch-tegra114 include	files
 
Stephen Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
 
Stephen Warren
- [U-Boot] [PATCH v2 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
 
Stephen Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
 
Stephen Warren
- [U-Boot] [PATCH v2] powerpc/85xx: select -mcpu=8540 to match -Wa,	e500
 
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx: add support for MMUv2 page sizes
 
Scott Wood
- [U-Boot] [PATCH] serial/ns16550: don't generate functions for	undefined ports
 
Scott Wood
- [U-Boot] [PATCH v2] powerpc/mpc85xx: add support for MMUv2 page	sizes
 
Scott Wood
- [U-Boot] [PATCH V3 1/1] imximage.cfg: run files through C	preprocessor
 
Troy Kisky
- [U-Boot] [Patch v2] Introduce a global bool type
 
Allen Martin
- [U-Boot] [Patch v2] Introduce a global bool type
 
Allen Martin
- [U-Boot] [PATCH] Introduce a global bool type
 
Albert ARIBAUD
- [U-Boot] [PATCH] woodburn: Set Write Protection GPIO as input
 
Fabio Estevam
- [U-Boot] [PATCH v2 1/1] omap4: allow the use of a plain text env file instead boot scripts
 
Javier Martinez Canillas
- [U-Boot] [PATCH v2 1/1] omap4: allow the use of a plain text env file instead boot scripts
 
Tom Rini
- [U-Boot] [RFC 00/10] MIPS: initial support for emulated Malta board
 
Gabor Juhos
- [U-Boot] [RFC 01/10] MIPS: qemu-malta: add support for emulated	MIPS Malta board
 
Gabor Juhos
- [U-Boot] [RFC 02/10] MIPS: qemu-malta: add reset support
 
Gabor Juhos
- [U-Boot] [RFC 03/10] MIPS: qemu-malta: enable flash support
 
Gabor Juhos
- [U-Boot] [RFC 04/10] MIPS: import gt64120.h header from Linux	3.8-rc3
 
Gabor Juhos
- [U-Boot] [RFC 05/10] MIPS: qemu-malta: setup GT64120 registers as	done by YAMON
 
Gabor Juhos
- [U-Boot] [RFC 06/10] MIPS: qemu-malta: add PCI support
 
Gabor Juhos
- [U-Boot] [RFC 07/10] net: pcnet: use pci_virt_to_mem to obtain	buffer addresses
 
Gabor Juhos
- [U-Boot] [RFC 08/10] MIPS: qemu-malta: bring up ethernet
 
Gabor Juhos
- [U-Boot] [RFC 09/10] MIPS: bootm.c: add YAMON style Linux	preparation/jump code
 
Gabor Juhos
- [U-Boot] [RFC 10/10] MIPS: start.S: emulate REVISION register for	qemu-malta
 
Gabor Juhos
- [U-Boot] i.MX6 Solo and Dual Lite
 
Eric Nelson
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
 
Linus Walleij
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
 
Marek Vasut
- [U-Boot] [PATCH 15/18 V2] mxs: Add MX23 quirks into the clock code
 
Marek Vasut
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Chris Packham
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Chris Packham
- [U-Boot] [PATCH 0/5] Add splash screen for CM-T35
 
Nikita Kiryanov
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Angelo Dureghello
- [U-Boot] [PATCH 0/5] Add splash screen for CM-T35
 
Jeroen Hofstee
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Jeroen Hofstee
- [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
 
Jeroen Hofstee
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Albert ARIBAUD
- [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters
 
Jeroen Hofstee
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Chris Packham
- [U-Boot] [PATCH 1/5] omap3: add useful dss defines
 
Jeroen Hofstee
- [U-Boot] [PATCH 1/5] treewide: include libfdt_env.h before fdt.h
 
David Gibson
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Chris Packham
- [U-Boot] U-Boot Graphics Library?
 
Alexander Holler
- [U-Boot] cc-list modified?
 
Alexander Holler
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Ramesh K Khokhani
- [U-Boot] [PATCH] powerpc/t4240: work around errata A-005977
 
Chunhe Lan
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Nikita Kiryanov
- [U-Boot] [PATCH 1/5] omap3: add useful dss defines
 
Nikita Kiryanov
- [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
 
Nikita Kiryanov
- [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters
 
Nikita Kiryanov
- [U-Boot] i.MX6 Solo and Dual Lite
 
Stefano Babic
- [U-Boot] [PATCH 05/15] powerpc/83xx/km: add MV88E6122 switch	support for kmvect1
 
Holger Brunck
- [U-Boot] [PATCH 0/7] EXYNOS5: Add audio support for Snow
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/7] EXYNOS5: Add function to enable XXTI clock	source
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/7] Sound: MAX98095: Add the driver for codec
 
Rajeshwari Shinde
- [U-Boot] [PATCH 3/7] Sound: Support for MAX98095 codec in driver
 
Rajeshwari Shinde
- [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095
 
Rajeshwari Shinde
- [U-Boot] [PATCH 5/7] EXYNOS5: FDT: Add compatible strings for	MAX98095
 
Rajeshwari Shinde
- [U-Boot] [PATCH 6/7] EXYNOS5: Add initial DTS file for Snow.
 
Rajeshwari Shinde
- [U-Boot] [PATCH 7/7] EXYNOS5: Snow: Add a configuration file
 
Rajeshwari Shinde
- [U-Boot] [PATCH] mxs: Linux uses ttyAMA0 as DUART
 
Stefano Babic
- [U-Boot] [PATCH 01/18] mxs: mmc: Drop unused members from	struct mxsmmc_priv
 
Stefano Babic
- [U-Boot] [PATCH] woodburn: Set Write Protection GPIO as input
 
Stefano Babic
- [U-Boot] [PATCH 0/7 v5] Add TMU support for Exynos5250 based	SMDK5250
 
Akshay Saraswat
- [U-Boot] [PATCH 1/7 v5] EXYNOS5: TMU: Add driver for Thermal	Management Unit
 
Akshay Saraswat
- [U-Boot] [PATCH 2/7 v5] EXYNOS5: Implement board_poweroff for Thermal Management Unit
 
Akshay Saraswat
- [U-Boot] [PATCH 3/7 v5] EXYNOS5: FDT: Add TMU device node values
 
Akshay Saraswat
- [U-Boot] [PATCH 4/7 v5] EXYNOS5: TMU: Add TMU init and status check
 
Akshay Saraswat
- [U-Boot] [PATCH 5/7 v5] EXYNOS5: Config: Enable support for Exynos	TMU driver
 
Akshay Saraswat
- [U-Boot] [PATCH 6/7 v5] TMU: Add TMU support in dtt command
 
Akshay Saraswat
- [U-Boot] [PATCH 7/7 v5] EXYNOS5: Config: Enable dtt command for TMU
 
Akshay Saraswat
- [U-Boot] [PATCH V5 00/10] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
 
Amar
- [U-Boot] [PATCH V5 01/10] FDT: Add compatible string for DWMMC
 
Amar
- [U-Boot] [PATCH V5 02/10] EXYNOS5: FDT: Add DWMMC device node data
 
Amar
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Amar
- [U-Boot] [PATCH V5 04/10] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Amar
- [U-Boot] [PATCH V5 05/10] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
 
Amar
- [U-Boot] [PATCH V5 06/10] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
 
Amar
- [U-Boot] [PATCH V5 07/10] MMC: APIs to support resize of EMMC boot	partition
 
Amar
- [U-Boot] [PATCH V5 08/10] SMDK5250: Enable EMMC booting
 
Amar
- [U-Boot] [PATCH V5 09/10] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
 
Amar
- [U-Boot] [PATCH V5 10/10] EXYNOS5: I2C: Added FDT and non-FDT	support for I2C
 
Amar
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 0/5] Initial IPv6 support
 
Wolfgang Denk
- [U-Boot] Booting different kernel from U-Boot based on time	stamp
 
Wolfgang Denk
- [U-Boot] [RFC 06/10] MIPS: qemu-malta: add PCI support
 
Wolfgang Denk
- [U-Boot] Booting different kernel from U-Boot based on time	stamp
 
Hemal Patel
- [U-Boot] Booting different kernel from U-Boot based on time	stamp
 
Hemal Patel
- [U-Boot] [PATCH v2 01/16] km/common: remove unneeded ifdefs for I2C
 
Holger Brunck
- [U-Boot] [PATCH v2 02/16] km/common/ivm: remove obsolete code
 
Holger Brunck
- [U-Boot] [PATCH v2 03/16] km/common/ivm: remove	CONFIG_SYS_I2C_IVM_BUS related code
 
Holger Brunck
- [U-Boot] [PATCH v2 04/16] km82xx,	km83xx: move ethernet_present() from common to cpu specific
 
Holger Brunck
- [U-Boot] [PATCH v2 05/16] km/common/ivm: rework piggy mac adress	offset generation
 
Holger Brunck
- [U-Boot] [PATCH v2 06/16] powerpc/83xx/km: add MV88E6122 switch	support for kmvect1
 
Holger Brunck
- [U-Boot] [PATCH v2 07/16] powerpc/83xx: use ppc_6xx as arch	variable for kmvect1
 
Holger Brunck
- [U-Boot] [PATCH v2 08/16] km/common: introduce $uimage variable
 
Holger Brunck
- [U-Boot] [PATCH v2 09/16] km/scripts: replace hardcoded uImage
 
Holger Brunck
- [U-Boot] [PATCH v2 10/16] kmeter1_nand: allow uasge of	NAND_ECC_SOFT_BCH
 
Holger Brunck
- [U-Boot] [PATCH v2 11/16] powerpc/83xx: use NAND_ECC_BCH for	kmcoge5ne
 
Holger Brunck
- [U-Boot] [PATCH v2 12/16] km/common: add eccmode to kernel	commandline
 
Holger Brunck
- [U-Boot] [PATCH v2 13/16] powerpc/83xx/km: cleanup tuxx1 support
 
Holger Brunck
- [U-Boot] [PATCH v2 14/16] powerpc/83xx/km: add support for kmopti2	board
 
Holger Brunck
- [U-Boot] [PATCH v2 15/16] powerpc/83xx/km: remove uneeded	CONFIG_MISC_INIT_R
 
Holger Brunck
- [U-Boot] [PATCH v2 16/16] powerpc/83xx/km: drop uneeded dtt_bus	environment var
 
Holger Brunck
- [U-Boot] [PATCH 0/5] Add splash screen for CM-T35
 
Tom Rini
- [U-Boot] Booting different kernel from U-Boot based on time	stamp
 
Wolfgang Denk
- [U-Boot] Booting different kernel from U-Boot based on time	stamp
 
Wolfgang Denk
- [U-Boot] [PATCH] Introduce a global bool type
 
Scott Wood
- [U-Boot] cc-list modified?
 
Scott Wood
- [U-Boot] [STATUS] Patchwork
 
Tom Rini
- [U-Boot] cc-list modified?
 
Alexander Holler
- [U-Boot] [PATCH 1/5] omap3: add useful dss defines
 
Jeroen Hofstee
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Jeroen Hofstee
- [U-Boot] [PATCH v2] tegra: fdt: remove clocks nodes
 
Simon Glass
- [U-Boot] [PATCH 1/2] SF: Add driver for Gigabyte device GD25LQ	and GD25Q64B
 
Simon Glass
- [U-Boot] [PATCH 2/2] EXYNOS5: Enable SPI Gigabyte device.
 
Simon Glass
- [U-Boot] [GIT PULL] u-boot-mips/master
 
Tom Rini
- [U-Boot] [PATCH] Introduce a global bool type
 
Måns Rullgård
- [U-Boot] [PATCH] Introduce a global bool type
 
Scott Wood
- [U-Boot] [PATCH] mxs: Boost the memory power supply
 
Marek Vasut
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
 
Simon Glass
- [U-Boot] [PATCH] Introduce a global bool type
 
Måns Rullgård
- [U-Boot] [PATCH 1/2] EXYNOS5: Add function to setup set ps hold
 
Simon Glass
- [U-Boot] [PATCH] tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
 
Lucas Stach
- [U-Boot] [PATCH] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it	claims in the README
 
Lucas Stach
- [U-Boot] [PATCH] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
 
Simon Glass
- [U-Boot] [PATCH] mxs: Boost the memory power supply
 
Otavio Salvador
- [U-Boot] [PATCH V2] mxs: Boost the memory power supply
 
Marek Vasut
- [U-Boot] [PATCH] mxs: Boost the memory power supply
 
Marek Vasut
- [U-Boot] [PATCH] mxs: Boost the memory power supply
 
Fabio Estevam
- [U-Boot] [PATCH] mxs: Boost the memory power supply
 
Otavio Salvador
- [U-Boot] [PATCH V2] mxs: Boost the memory power supply
 
Otavio Salvador
- [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0	register in MMC PIO mode
 
Marek Vasut
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
 
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
 
Marek Vasut
- [U-Boot] [PATCH 0/9] iMX23 MMC support and environment addition
 
Otavio Salvador
- [U-Boot] [PATCH 1/9] mx23: Add SSP registers map
 
Otavio Salvador
- [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support
 
Marek Vasut
- [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0	register in MMC PIO mode
 
Otavio Salvador
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
 
Otavio Salvador
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support
 
Otavio Salvador
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection
 
Otavio Salvador
- [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and	timeout in iMX23
 
Otavio Salvador
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Otavio Salvador
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection
 
Marek Vasut
- [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
 
Marek Vasut
- [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors	and timeout in iMX23
 
Marek Vasut
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Marek Vasut
- [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode
 
Otavio Salvador
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
 
Otavio Salvador
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Otavio Salvador
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection
 
Otavio Salvador
- [U-Boot] [PATCH 5/9] mx23_olinuxino: Add MMC support
 
Otavio Salvador
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Marek Vasut
- [U-Boot] [PATCH 6/9] mx23_olinuxino: Skip MMC Card detection
 
Marek Vasut
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
 
Marek Vasut
- [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH 2/9] mx23: Use XFER_COUNT field in HW_SSP_CTRL0	register in MMC PIO mode
 
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors and timeout in iMX23
 
Otavio Salvador
- [U-Boot] [PATCH 8/9] mxs: Fix MMC reset to avoid write errors	and timeout in iMX23
 
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
 
Marek Vasut
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
 
Fabio Estevam
- [U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
 
Fabio Estevam
- [U-Boot] [PATCH V5 01/10] FDT: Add compatible string for DWMMC
 
Jaehoon Chung
- [U-Boot] [PATCH V5 02/10] EXYNOS5: FDT: Add DWMMC device node	data
 
Jaehoon Chung
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
 
Marek Vasut
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Jaehoon Chung
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Joonyoung Shim
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Amarendra Reddy
- [U-Boot] [RFC 06/10] MIPS: qemu-malta: add PCI support
 
Gabor Juhos
- [U-Boot] configure USB Host1 in U-Boot of iMx53
 
sarvesh gupta
- [U-Boot] [PATCH V4 4/9] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Amarendra Reddy
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Jaehoon Chung
- [U-Boot] [PATCH] MIPS: simplify relocated _G_O_T_ address	calculation
 
Gabor Juhos
- [U-Boot] [PATCH] malloc: make malloc_bin_reloc static
 
Gabor Juhos
- [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND
 
Albert ARIBAUD
- [U-Boot] [PATCH] Introduce a global bool type
 
Albert ARIBAUD
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
 
Linus Walleij
- [U-Boot] [PATCH] at91sam9x5: mmc: save environment as a file in FAT	partition.
 
Josh Wu
- [U-Boot] [PATCH v2] mx6qsabreauto: enable USB host interface
 
Dirk Behme
- [U-Boot] [PATCH] mpc8xxx: fix DDR init value to use	CONFIG_MEM_INIT_VALUE
 
Anatolij Gustschin
- [U-Boot] [PATCH 4/9] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like	it claims in the README
 
Lucas Stach
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Ramesh K Khokhani
- [U-Boot] U-Boot Graphics Library?
 
Alexander Holler
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
 
Marek Vasut
- [U-Boot] [PATCH] Introduce a global bool type
 
Måns Rullgård
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
 
Linus Walleij
- [U-Boot] [PATCH] integrator: pass a Device Tree by default
 
Marek Vasut
- [U-Boot] [PATCH 0/2] Davinci, MAC addr improvements
 
Kim Bøndergaard
- [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM	configurable, CONFIG_MAC_EEPROM_ADDR
 
Kim Bøndergaard
- [U-Boot] [PATCH 2/2] Davinci: Fix,	console output confusing while setting MAC address
 
Kim Bøndergaard
- [U-Boot] [PATCH 1/2] video: exynos_dp: Remove unused variable	disp_info
 
Simon Glass
- [U-Boot] [PATCH 2/2] video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selected
 
Simon Glass
- [U-Boot] [PATCH 0/3 V2] EXYNOS5: Add GPIO numbering feature
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V2] S5P: GPIO: Add generic pin numbering API's
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V2] EXYNOS5: Add gpio pin numbering feature
 
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V2] EXYNOS5: GPIO: Enable GPIO Command for	EXYNOS5
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2] SMDK5250: Add PMIC voltage settings
 
Simon Glass
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
 
Simon Glass
- [U-Boot] [PATCH v2 8/9] tegra: add SPI SLINK driver
 
Simon Glass
- [U-Boot] [PATCH] Tegra: T20: Remove unused 'SLOW' SoC ID and	PLLX table entry
 
Simon Glass
- [U-Boot] [PATCH 0/2] make u-boot/drivers/net/designware cache	supportive
 
Frank Dols
- [U-Boot] [PATCH 1/2] drivers/net/designware,	do an explicit memory access instead of implicit,	re-written assignments to use readl() and writel(),	all of this as preperation for making the driver able to work in a	cached environment (I$D$ support).
 
Frank Dols
- [U-Boot] [PATCH 2/2] u-boot/drivers/net/designware with cache	support.
 
Frank Dols
- [U-Boot] [PATCH 2/2] video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selected
 
Ajay kumar
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
 
Simon Glass
- [U-Boot] [PATCH 2/2] video: exynos_fb: Make a call to draw_logo only when CONFIG_CMD_BMP is selected
 
Simon Glass
- [U-Boot] [PATCH v2] mx6qsabre_common: Let mmc partition be	board specific
 
Fabio Estevam
- [U-Boot] [PATCH 1/7] EXYNOS5: Add function to enable XXTI clock	source
 
Simon Glass
- [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095
 
Simon Glass
- [U-Boot] [PATCH 6/7] EXYNOS5: Add initial DTS file for Snow.
 
Simon Glass
- [U-Boot] [PATCH 7/7] EXYNOS5: Snow: Add a configuration file
 
Simon Glass
- [U-Boot] [PATCH v2] mx6qsabre_common: Let mmc partition be	board specific
 
Stefano Babic
- [U-Boot] Custodians, Maintainers and old platforms
 
Detlev Zundel
- [U-Boot] [PATCH 1/7 v5] EXYNOS5: TMU: Add driver for Thermal	Management Unit
 
Simon Glass
- [U-Boot] [PATCH 2/7 v5] EXYNOS5: Implement board_poweroff for Thermal Management Unit
 
Simon Glass
- [U-Boot] [PATCH 3/7 v5] EXYNOS5: FDT: Add TMU device node values
 
Simon Glass
- [U-Boot] [PATCH 1/2] tegra: don't hard-code LCD into default	TEGRA_DEVICE_SETTINGS
 
Stephen Warren
- [U-Boot] [PATCH 2/2] tegra: rename FUNCMUX_UART2_UARTB
 
Stephen Warren
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
 
Stephen Warren
- [U-Boot] [PATCH] tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
 
Stephen Warren
- [U-Boot] [PATCH v2 3/7] Tegra114: Add CPU (armv7) files
 
Simon Glass
- [U-Boot] [PATCH v2 00/10] common.lcd: remove globals and cleanup
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 01/10] lcd,	amba: remove this driver since it is not used
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 02/10] lcd, tegra: remove unused cursor functions
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 03/10] lcd,	mpc8xx: move the mpc8xx driver to drivers/video
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 04/10] lcd,	pxafb: move the pxafb to drivers/video
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 05/10] common/lcd.c: cleanup use of global	variables
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 06/10] common/lcd.c: remove global lcd_base
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 08/10] lcd,	fb: remove duplicated prototypes and unused code
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 09/10] api/api_display: use the getters for	console size info
 
Jeroen Hofstee
- [U-Boot] [PATCH v2 1/7] Tegra114: Add arch-tegra114 include	files
 
Tom Warren
- [U-Boot] [PATCH 4/7 v5] EXYNOS5: TMU: Add TMU init and status	check
 
Simon Glass
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
 
Tom Warren
- [U-Boot] [PATCH 5/7 v5] EXYNOS5: Config: Enable support for	Exynos TMU driver
 
Simon Glass
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
 
Tom Warren
- [U-Boot] [PATCH 1/2] MIPS: use inline directive for __in*s	functions
 
Daniel Schwierzeck
- [U-Boot] [PATCH 2/2] MIPS: convert IO port accessor functions	to 'static inline'
 
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: start{,	64}.S: fill branch delay slots with NOP instructions
 
Daniel Schwierzeck
- [U-Boot] [PATCH 6/7 v5] TMU: Add TMU support in dtt command
 
Simon Glass
- [U-Boot] [PATCH 7/7 v5] EXYNOS5: Config: Enable dtt command for	TMU
 
Simon Glass
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
 
Simon Glass
- [U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)
 
Simon Glass
- [U-Boot] [PATCH v2 1/7] Tegra114: Add arch-tegra114 include	files
 
Stephen Warren
- [U-Boot] [PATCH v2 2/7] Tegra114: Add AVP (arm720t) files
 
Stephen Warren
- [U-Boot] [PATCH] Fix MCF5235 SDRAM base address macro
 
Steve deRosier
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
 
Simon Glass
- [U-Boot] [PATCH 1/2] tegra: don't hard-code LCD into default	TEGRA_DEVICE_SETTINGS
 
Simon Glass
- [U-Boot] [PATCH 2/2] tegra: rename FUNCMUX_UART2_UARTB
 
Simon Glass
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
 
Stephen Warren
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
 
Tom Warren
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
 
Simon Glass
- [U-Boot] [PATCH] sandbox: fix compiler warning
 
Allen Martin
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
 
Simon Glass
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
 
Tom Warren
- [U-Boot] [PATCH v2 4/7] Tegra114: Add common CPU (shared) files
 
Simon Glass
- [U-Boot] [PATCH] sandbox: fix compiler warning
 
Simon Glass
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
 
Stephen Warren
- [U-Boot] [PATCH v4 1/2] m68k: add support for mcf5307 cpu
 
Angelo Dureghello
- [U-Boot] [PATCH v4 2/2] amcore: add support for amcore board
 
Angelo Dureghello
- [U-Boot] [PATCH] tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
 
Lucas Stach
- [U-Boot] [PATCH] sandbox: fix compiler warning
 
Allen Martin
- [U-Boot] [PATCH v2] sandbox: fix compiler warning
 
Allen Martin
- [U-Boot] [PATCH] sandbox: fix compiler warning
 
Simon Glass
- [U-Boot] [PATCH 1/1] am335x_evm: Add am335x_evm_usbspl boot target
 
Tom Rini
- [U-Boot] [PATCH] sandbox: fix compiler warning
 
Allen Martin
- [U-Boot] [PATCH v3] sandbox: fix compiler warning
 
Allen Martin
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
 
Troy Kisky
- [U-Boot] [PATCH] MAKEALL: fix kill_children for BSD hosts
 
Andreas Bießmann
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
 
Simon Glass
- [U-Boot] [PATCH V5 02/10] EXYNOS5: FDT: Add DWMMC device node	data
 
Simon Glass
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
 
Stephen Warren
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Simon Glass
- [U-Boot] [PATCH] tegra: implement pinmux_avoid_func()
 
Simon Glass
- [U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23
 
Marek Vasut
- [U-Boot] [PATCH 2/6] mxs: ssp: Add SSP registers map for MX23
 
Marek Vasut
- [U-Boot] [PATCH 3/6] mxs: mmc: Fix MMC reset on iMX23
 
Marek Vasut
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card detect	implementation
 
Marek Vasut
- [U-Boot] [PATCH 5/6] mxs: mmc: Fix the MMC driver for MX23
 
Marek Vasut
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
 
Marek Vasut
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
 
Fabio Estevam
- [U-Boot] [PATCH] tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BIT
 
Allen Martin
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
 
Marek Vasut
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
 
Fabio Estevam
- [U-Boot] [PATCH 0/2] make u-boot/drivers/net/designware cache	supportive
 
Vipin Kumar
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
 
Vipin Kumar
- [U-Boot] U-Boot Mainline v2013.01
 
Sarvesh  Gupta
- [U-Boot] [PATCH 2/2] SMDK5250: Enable SPI Gigabyte device.
 
Rajeshwari Birje
- [U-Boot] [PATCH 0/2 V2] EXYNOS5: Enable Gigabyte device GD25LQ and	GD25Q64B
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ	and GD25Q64B
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2] SMDK5250: Enable SPI Gigabyte device.
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V2] SMDK5250: Enable SPI Gigabyte device.
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/1] console: USB: KBD: Fix incorrect autoboot	timeout
 
Jim Lin
- [U-Boot] [PATCH v3] sandbox: fix compiler warning
 
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
 
Albert ARIBAUD
- [U-Boot] [PATCH] powerpc/p2041: fix serdes reference clock	frequency for PC board
 
Shaohui Xie
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Ramesh K Khokhani
- [U-Boot] [PATCH 1/5] omap3: add useful dss defines
 
Nikita Kiryanov
- [U-Boot] [PATCH] powerpc/p2041: fix serdes reference clock frequency for PC board
 
Xie Shaohui-B21989
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Nikita Kiryanov
- [U-Boot] [PATCH 1/1] console: USB: KBD: Fix incorrect autoboot	timeout
 
Wolfgang Denk
- [U-Boot] [PATCH 0/4] usb:gadget: USB Mass Storage Gadget
 
Piotr Wilczek
- [U-Boot] =?y?q?=5BPATCH=201/4=5D=20usb=3Acomposite=3A=20USB=20Mass=20Storage=20-=20storage=5Fcommon=2Ec=20from=20Linux=20kernel?=
 
Piotr Wilczek
- [U-Boot] [PATCH 2/4] usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernel
 
Piotr Wilczek
- [U-Boot] [PATCH 3/4] usb:gadget: USB Mass Storage Gadget support
 
Piotr Wilczek
- [U-Boot] [PATCH 4/4] arm:trats: Use new ums command
 
Piotr Wilczek
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3	reset done
 
Anatolij Gustschin
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
 
Stefano Babic
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Stefano Babic
- [U-Boot] [PATCH] at91sam9x5: mmc: save environment as a file in FAT partition.
 
Bo Shen
- [U-Boot] serial: CONFIG_ARM_DCC_MULTI failures
 
Michal Simek
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI	option
 
Michal Simek
- [U-Boot] [PATCH 2/2] serial: arm_dcc: Fix compilation warning and	remove unneeded initialization
 
Michal Simek
- [U-Boot] [PATCH 1/1] console: USB: KBD: Fix incorrect autoboot timeout
 
Jim Lin
- [U-Boot] [PATCH] powerpc/85xx: add missing QMAN frequency	calculation
 
Shaohui Xie
- [U-Boot] [PATCH] microblaze: Add muldi3.c which contains routines	for _muldi3
 
Michal Simek
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove	CONFIG_ARM_DCC_MULTI option
 
Wolfgang Denk
- [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095
 
Rajeshwari Birje
- [U-Boot] [PATCH V3 1/1] imximage.cfg: run files through C	preprocessor
 
Stefano Babic
- [U-Boot] [PATCH 0/2 V2] SMDK5250: Set Initial PMIC Values
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2 V2] EXYNOS5: Add function to setup set ps hold
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/2 V2] SMDK5250: Add PMIC voltage settings
 
Rajeshwari Shinde
- [U-Boot] [PATCH 7/7] EXYNOS5: Snow: Add a configuration file
 
Rajeshwari Birje
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
 
Vipin Kumar
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3	reset done
 
Xie Shaohui-B21989
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove	CONFIG_ARM_DCC_MULTI option
 
Michal Simek
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
 
Albert ARIBAUD
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
 
Anatolij Gustschin
- [U-Boot] [PATCH 1/1 v2] console: USB: KBD: Fix incorrect autoboot	timeout
 
Jim Lin
- [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND
 
Nikita Kiryanov
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Otavio Salvador
- [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND
 
Nikita Kiryanov
- [U-Boot] [PATCH] common: cmd_bdinfo: Fix bdinfo to show all MACs	for Microblaze and ARM
 
Michal Simek
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Marek Vasut
- [U-Boot] [PATCH] MAKEALL: fix kill_children for BSD hosts
 
Andreas Bießmann
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Stefano Babic
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Marek Vasut
- [U-Boot] [PATCH 9/9] mx23: Use PIO mode support for MMC
 
Otavio Salvador
- [U-Boot] [PATCH] sf: spansion: Correct the first byte of idcode1	for S25FL256S part
 
Michal Simek
- [U-Boot] [PATCH 6/6] mxs: mmc: mx23_olinuxino: Add MMC support
 
Otavio Salvador
- [U-Boot] [PATCH] net: phy: Define Marvell 88e1518 phy
 
Michal Simek
- [U-Boot] [PATCH] spi: xilinx_spi: Perform software reset during	slave setup
 
Michal Simek
- [U-Boot] [PATCH 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH 1/2] sf: stmicro: Add support for N25Q64
 
Michal Simek
- [U-Boot] [PATCH 2/2] sf: stmicro: Add support for N25Q64A
 
Michal Simek
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Mats Kärrman
- [U-Boot] [PATCH 1/4] board: xilinx: Remove unused ancient i2c driver
 
Michal Simek
- [U-Boot] [PATCH 2/4] board: xilinx: Remove common folder
 
Michal Simek
- [U-Boot] [PATCH 3/4] common: cmd_bdinfo: Fix compilation warning	for microblaze
 
Michal Simek
- [U-Boot] [PATCH 4/4] microblaze: Remove FSL support from generic	board
 
Michal Simek
- [U-Boot] [PATCH 2/2] mx23evk: Add initial board support
 
Fabio Estevam
- [U-Boot] [PATCH 1/2] sf: stmicro: Add support for N25Q64
 
Andrew Dyer
- [U-Boot] [PATCH 1/2] sf: stmicro: Add support for N25Q64
 
Jagannadha Sutradharudu Teki
- [U-Boot] Flash Not Erased Problem with M29W128GL
 
Angelo Dureghello
- [U-Boot] [PATCH v2 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx23evk: Add initial board support
 
Fabio Estevam
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
 
Angelo Dureghello
- [U-Boot] [PATCH v3 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH 0/9 v6] Add TMU support for Exynos5250 based	SMDK5250
 
Akshay Saraswat
- [U-Boot] [PATCH 1/9 v6] EXYNOS5: TMU: Add driver for Thermal	Management Unit
 
Akshay Saraswat
- [U-Boot] [PATCH 2/9 v6] EXYNOS5: Implement board_poweroff for Thermal Management Unit
 
Akshay Saraswat
- [U-Boot] [PATCH 3/9 v6] EXYNOS5: FDT: Add TMU device node values
 
Akshay Saraswat
- [U-Boot] [PATCH 4/9 v6] EXYNOS5: TMU: Add TMU init and status check
 
Akshay Saraswat
- [U-Boot] [PATCH 5/9 v6] EXYNOS5: Config: Enable support for Exynos	TMU driver
 
Akshay Saraswat
- [U-Boot] [PATCH 6/9 v6] TMU: Add TMU support in dtt command
 
Akshay Saraswat
- [U-Boot] [PATCH 7/9 v6] EXYNOS5: Config: Enable dtt command for TMU
 
Akshay Saraswat
- [U-Boot] [PATCH 8/9 v6] EXYNOS5: TMU: Add hardware tripping
 
Akshay Saraswat
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Mats Kärrman
- [U-Boot] [PATCH 9/9 v6] EXYNOS5: FDT: Add a H/W-trip member to TMU	node
 
Akshay Saraswat
- [U-Boot] Raspberry pi
 
Haneef Mohamed
- [U-Boot] [PATCH 00/10] MIPS: initial support for emulated Malta	board
 
Gabor Juhos
- [U-Boot] [PATCH 01/10] MIPS: qemu-malta: add support for emulated	MIPS Malta board
 
Gabor Juhos
- [U-Boot] [PATCH 02/10] MIPS: qemu-malta: add reset support
 
Gabor Juhos
- [U-Boot] [PATCH 03/10] MIPS: qemu-malta: enable flash support
 
Gabor Juhos
- [U-Boot] [PATCH 04/10] MIPS: import gt64120.h header from Linux	3.8-rc3
 
Gabor Juhos
- [U-Boot] [PATCH 05/10] MIPS: qemu-malta: setup GT64120 registers as	done by YAMON
 
Gabor Juhos
- [U-Boot] [PATCH 06/10] MIPS: qemu-malta: add PCI support
 
Gabor Juhos
- [U-Boot] [PATCH 07/10] net: pcnet: use pci_virt_to_mem to obtain	buffer addresses
 
Gabor Juhos
- [U-Boot] [PATCH 08/10] MIPS: qemu-malta: bring up ethernet
 
Gabor Juhos
- [U-Boot] [PATCH 09/10] MIPS: bootm.c: add YAMON style Linux	preparation/jump code
 
Gabor Juhos
- [U-Boot] [PATCH 10/10] MIPS: start.S: emulate REVISION register for	qemu-malta
 
Gabor Juhos
- [U-Boot] [PATCH v3 2/2] mx23evk: Add initial board support
 
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] mx23_olinuxino: Add default environment
 
Marek Vasut
- [U-Boot] [PATCH v3 2/2] mx23evk: Add initial board support
 
Fabio Estevam
- [U-Boot] [PATCH v4 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH v4 2/2] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
 
Troy Kisky
- [U-Boot] [PATCH v5 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH v5 2/2] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH v5 1/2] mx23_olinuxino: Add default environment
 
Marek Vasut
- [U-Boot] [PATCH 1/1 v2] console: USB: KBD: Fix incorrect	autoboot timeout
 
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/p5040: add serdes2 memory map register	define
 
Andy Fleming
- [U-Boot] [PATCH v5 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH v6 2/2] mx23evk: Add initial board support
 
Otavio Salvador
- [U-Boot] [PATCH v6 2/2] mx23evk: Add initial board support
 
Fabio Estevam
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Wolfgang Denk
- [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
 
Andy Fleming
- [U-Boot] [PATCH v3] sandbox: fix compiler warning
 
Allen Martin
- [U-Boot] [PATCH v5 1/2] mx23_olinuxino: Add default environment
 
Marek Vasut
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Wolfgang Denk
- [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
 
Jeroen Hofstee
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
 
Scott Wood
- [U-Boot] [Patch v3] Consolidate bool type
 
Scott Wood
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Mats Kärrman
- [U-Boot] [RFC Patch v4] Consolidate bool type
 
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
 
Scott Wood
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [PATCH] board/common: Add support for QIXIS read/write using i2c
 
Andy Fleming
- [U-Boot] [Patch v3] Consolidate bool type
 
Allen Martin
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Jeroen Hofstee
- [U-Boot] [PATCH] Tegra: Move common clock code to	arch/arm/cpu/tegra-common/clock.c
 
Tom Warren
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
 
Troy Kisky
- [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters
 
Jeroen Hofstee
- [U-Boot] [PATCHv1] powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'.
 
Andy Fleming
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3	reset done
 
Xie Shaohui-B21989
- [U-Boot] [PATCH] board/common: Add support for QIXIS read/write using i2c
 
Prabhakar Kushwaha
- [U-Boot] [PATCH][v2] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
 
Prabhakar Kushwaha
- [U-Boot] [PATCH] Tegra: Move common clock code to	arch/arm/cpu/tegra-common/clock.c
 
Stephen Warren
- [U-Boot] [PATCH][v2] board/common: Add support for QIXIS read/write	using i2c
 
Prabhakar Kushwaha
- [U-Boot] [PATCH][v3] powerpc/mpc85xx: Add BSC9132/BSC9232 processor	support
 
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/t4240: Adding workaround errata A-005871
 
Shengzhou Liu
- [U-Boot] raspberry pi
 
Mohamed Haneef
- [U-Boot] how to create patches for mailing
 
Maxim Podbereznyy
- [U-Boot] Raspberry pi
 
Anatolij Gustschin
- [U-Boot] how to create patches for mailing
 
Hebbar, Gururaja
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
 
Anatolij Gustschin
- [U-Boot] [PATCH v2] powerpc/85xx: select -mcpu=8540 to match	-Wa, e500
 
Andy Fleming
- [U-Boot] B4860/B4420 patches and some updates for qixis and	T4240QDS
 
Andy Fleming
- [U-Boot] how to create patches for mailing
 
Maxim Podbereznyy
- [U-Boot] how to create patches for mailing
 
Hebbar, Gururaja
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Igor Grinberg
- [U-Boot] how to create patches for mailing
 
Eric Bénard
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Joakim Tjernlund
- [U-Boot] [PATCHv2] powerpc/mpc85xx: Add property 'fsl,	sec-era' in device tree node 'crypto'
 
Vakul Garg
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Joakim Tjernlund
- [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays
 
Igor Grinberg
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
 
Stefano Babic
- [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters
 
Igor Grinberg
- [U-Boot] Want to study U-Boot code
 
Woody Wu
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Joakim Tjernlund
- [U-Boot] [PATCH 0/7 V2] EXYNOS5: Add audio support for Snow
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/7 V2] EXYNOS5: Add function to enable XXTI clock	source
 
Rajeshwari Shinde
- [U-Boot] [PATCH 2/7 V2] Sound: MAX98095: Add the driver for codec
 
Rajeshwari Shinde
- [U-Boot] [PATCH 3/7 V2] Sound: Support for MAX98095 codec in driver
 
Rajeshwari Shinde
- [U-Boot] [PATCH 4/7 V2] EXYNOS5: GPIO to enable MAX98095
 
Rajeshwari Shinde
- [U-Boot] [PATCH 5/7 V2] EXYNOS5: FDT: Add compatible strings for	MAX98095
 
Rajeshwari Shinde
- [U-Boot] [PATCH 6/7 V2] EXYNOS5: Add initial DTS file for Snow.
 
Rajeshwari Shinde
- [U-Boot] [PATCH 7/7 V2] EXYNOS5: Snow: Add a configuration file
 
Rajeshwari Shinde
- [U-Boot] [PATCH 1/2] drivers/net/designware, do an explicit memory access instead of implicit, re-written assignments to use readl() and writel(), all of this as preperation for making the driver able to work in a cached environment (I$D$ support).
 
Frank Dols
- [U-Boot] [PATCH 1/1 v2] console: USB: KBD: Fix incorrect autoboot timeout
 
Jim Lin
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect autoboot	timeout
 
Jim Lin
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Mats Kärrman
- [U-Boot] [PATCH 0/1] Add support for new SomIQ-AM37 system on module
 
Maxim Podbereznyy
- [U-Boot] [PATCH 1/1] Add support for new SomIQ-AM37 system on	module from MENTOREL Ltd SomIQ-AM37 is based on TI AM37/DM37	processors
 
Maxim Podbereznyy
- [U-Boot] [PATCH 1/4] usb:composite: USB Mass Storage -	storage_common.c from Linux kernel
 
Marek Vasut
- [U-Boot] [PATCH 2/4] usb:composite: USB Mass Storage -	f_mass_storage.c from Linux kernel
 
Marek Vasut
- [U-Boot] [PATCH 3/4] usb:gadget: USB Mass Storage Gadget support
 
Marek Vasut
- [U-Boot] [PATCH v3] sandbox: fix compiler warning
 
Albert ARIBAUD
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Mats Kärrman
- [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01
 
Joakim Tjernlund
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
 
Wolfgang Denk
- [U-Boot] [RFC] powerpc/lib: unsafe register handling in wait_ticks
 
Mats Kärrman
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
 
Angelo Dureghello
- [U-Boot] [PATCH 0/5] MIPS: start.S: relocate_code fixes and cleanups
 
Gabor Juhos
- [U-Boot] [PATCH 1/5] MIPS: start.S: fix boundary check in	relocate_code
 
Gabor Juhos
- [U-Boot] [PATCH 2/5] MIPS: start.S: set sp register directly
 
Gabor Juhos
- [U-Boot] [PATCH 3/5] MIPS: start.S: save reused arguments earlier	in relocate_code
 
Gabor Juhos
- [U-Boot] [PATCH 4/5] MIPS: start.S: simplify relocation offset	calculation
 
Gabor Juhos
- [U-Boot] [PATCH 5/5] MIPS: start.S: don't save flush_cache	parameters in advance
 
Gabor Juhos
- [U-Boot] [U-BOOT] help on mmc driver
 
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 00/11] tablebased pinmux for Tegra20
 
Lucas Stach
- [U-Boot] [PATCH 01/11] tegra: introduce config option to do table	based pinmux
 
Lucas Stach
- [U-Boot] [PATCH 02/11] tegra20: add entry point and helper for	tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 03/11] tegra20: switch over colibri_t20 board to	use tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 04/11] tegra20: switch over tamonten platform to	use tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 05/11] tegra20: switch over harmony board to use	tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to	use tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 07/11] tegra20: switch over whistler board to use	tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 08/11] tegra20: switch over paz00 board to use	tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 09/11] tegra20: switch over trimslice board to use	tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 10/11] tegra20: remove old pinmux setup
 
Lucas Stach
- [U-Boot] [PATCH 11/11] tegra20: remove funcmux
 
Lucas Stach
- [U-Boot] [Patch v3] Consolidate bool type
 
Allen Martin
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation	for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Simon Glass
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Marek Vasut
- [U-Boot] [PATCH] Tegra: Move common clock code to	arch/arm/cpu/tegra-common/clock.c
 
Simon Glass
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Otavio Salvador
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Marek Vasut
- [U-Boot] [Patch v3] Consolidate bool type
 
Scott Wood
- [U-Boot] [PATCH 3/9] mx23: Fix transfer size setting for SPI
 
Marek Vasut
- [U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23
 
Stefano Babic
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Lucas Stach
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
 
Wolfgang Denk
- [U-Boot] [Patch v3] Consolidate bool type
 
Allen Martin
- [U-Boot] [Patch v3] Consolidate bool type
 
Wolfgang Denk
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card	detect implementation
 
Stefano Babic
- [U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23
 
Marek Vasut
- [U-Boot] [Patch v3] Consolidate bool type
 
Allen Martin
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card	detect implementation
 
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card	detect implementation
 
Stefano Babic
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card	detect implementation
 
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Marek Vasut
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card	detect implementation
 
Marek Vasut
- [U-Boot] [RFC Patch v5] Consolidate bool type
 
York Sun
- [U-Boot] [RFC] powerpc/lib: unsafe register handling in	wait_ticks
 
Joakim Tjernlund
- [U-Boot] [PATCH] MAKEALL: add support for per architecture	toolchains
 
Allen Martin
- [U-Boot] [Patch v3] Consolidate bool type
 
York Sun
- [U-Boot] [U-BOOT] help on mmc driver
 
Lukasz Majewski
- [U-Boot] [RFC Patch v5] Consolidate bool type
 
Scott Wood
- [U-Boot] [RFC Patch v5] Consolidate bool type
 
York Sun
- [U-Boot] [RFC] powerpc/lib: unsafe register handling in	wait_ticks
 
Wolfgang Denk
- [U-Boot] [RFC Patch v5] Consolidate bool type
 
Allen Martin
- [U-Boot] [RFC Patch v5] Consolidate bool type
 
Wolfgang Denk
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
 
Angelo Dureghello
- [U-Boot] [PATCH v4 2/2] board: add support for amcore board
 
Wolfgang Denk
- [U-Boot] [PATCH v2] tegra: fdt: sort dts files
 
Allen Martin
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Jeroen Hofstee
- [U-Boot] [RFC Patch v6] Consolidate bool type
 
York Sun
- [U-Boot] Want to study U-Boot code
 
Marek Vasut
- [U-Boot] [PATCH v2] powerpc/85xx: select -mcpu=8540 to match	-Wa, e500
 
Scott Wood
- [U-Boot] [RFC PATCH v3 0/7] Initial IPv6 support
 
Chris Packham
- [U-Boot] [RFC PATCH v3 1/7] Initial net6.h
 
Chris Packham
- [U-Boot] [RFC PATCH v3 2/7] lib/vsprintf.c: add IPv6 compressed	format %pI6c
 
Chris Packham
- [U-Boot] [RFC PATCH v3 3/7] lib/net_utils.c: make string_to_ip	stricter
 
Chris Packham
- [U-Boot] [RFC PATCH v3 4/7] lib/net_utils.c: add string_to_ip6
 
Chris Packham
- [U-Boot] [RFC PATCH v3 5/7] common.h: add getenv_IP6addr
 
Chris Packham
- [U-Boot] [RFC PATCH v3 6/7] tsec: enable promiscuous mode for IPv6
 
Chris Packham
- [U-Boot] [RFC PATCH v3 7/7] net: ipv6 support
 
Chris Packham
- [U-Boot] [RFC Patch v6] Consolidate bool type
 
Allen Martin
- [U-Boot] [PATCH][v2] powerpc/p2041: fix serdes reference clock	frequency display for PC board
 
Shaohui Xie
- [U-Boot] [PATCH 1/2] ARM: bootm: allow skipping fdt memory node	fixup
 
Rob Herring
- [U-Boot] [PATCH 2/2] ARM: highbank: remove DRAM bank setup
 
Rob Herring
- [U-Boot] Want to study U-Boot code
 
Woody Wu
- [U-Boot] s3c2416 support in u-boot
 
Woody Wu
- [U-Boot] How to add new device driver from Linux driver source
 
"Chen, Jack C.W. (陳志偉 IES)"
- [U-Boot] [PATCH v6] Marvell MV88E61XX Switch Driver support
 
Kenny
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Igor Grinberg
- [U-Boot] access u-boot environment variables from kernel space
 
Manukumar
- [U-Boot] [PATCH 1/1] console: Improve TFTP booting performance
 
Jim Lin
- [U-Boot] How to add new device driver from Linux driver source
 
Macpaul Lin
- [U-Boot] [PATCH v2] integrator: pass a Device Tree by default
 
Linus Walleij
- [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3 reset done
 
Anatolij Gustschin
- [U-Boot] [RFC] powerpc/lib: unsafe register handling in	wait_ticks
 
Joakim Tjernlund
- [U-Boot] [PATCH 1/1] console: Improve TFTP booting performance
 
Wolfgang Denk
- [U-Boot] [PATCH 1/1] console: Improve TFTP booting performance
 
Wolfgang Denk
- [U-Boot] access u-boot environment variables from kernel space
 
Wolfgang Denk
- [U-Boot] [PATCH 3/4] usb:gadget: USB Mass Storage Gadget support
 
Piotr Wilczek
- [U-Boot] [PATCH 2/4] usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernel
 
Piotr Wilczek
- [U-Boot] [PATCH 1/4] usb:composite: USB Mass Storage - storage_common.c from Linux kernel
 
Piotr Wilczek
- [U-Boot] [PATCH v5 2/2] board: add support for amcore board
 
Angelo Dureghello
- [U-Boot] Want to study U-Boot code
 
Marek Vasut
- [U-Boot] [PATCH v2] integrator: pass a Device Tree by default
 
Marek Vasut
- [U-Boot] [PATCH 1/4] usb:composite: USB Mass Storage -	storage_common.c from Linux kernel
 
Marek Vasut
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for	SDHCI_send_command()
 
Jagan Teki
- [U-Boot] [PATCH v5 2/2] board: add support for amcore board
 
Wolfgang Denk
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Marek Vasut
- [U-Boot] [PATCH v5 2/2] board: add support for amcore board
 
Angelo Dureghello
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
 
Lucas Stach
- [U-Boot] [PATCH v2 1/7] tegra: usb: set USB_PORTS_MAX to correct	value
 
Lucas Stach
- [U-Boot] [PATCH v2 2/7] tegra: usb: make controller init functions	more self contained
 
Lucas Stach
- [U-Boot] [PATCH v2 3/7] tegra: usb: remove unneeded function	parameter
 
Lucas Stach
- [U-Boot] [PATCH v2 4/7] tegra: usb: move controller init into	start_port
 
Lucas Stach
- [U-Boot] [PATCH v2 5/7] tegra: usb: various small cleanups
 
Lucas Stach
- [U-Boot] [PATCH v2 6/7] tegra: usb: move implementation into right	directory
 
Lucas Stach
- [U-Boot] [PATCH v2 7/7] tegra: usb: move [start|stop]_port into	ehci_hcd_[init|stop]
 
Lucas Stach
- [U-Boot] [U-BOOT] help on mmc driver
 
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
 
Tom Warren
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
 
Lucas Stach
- [U-Boot] B4860/B4420 patches and some updates for qixis and	T4240QDS
 
Andy Fleming
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
 
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
 
Andy Fleming
- [U-Boot] Want to study U-Boot code
 
Woody Wu
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
 
Allen Martin
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
 
Tom Rini
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
 
Scott Wood
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
 
Scott Wood
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
 
Tom Rini
- [U-Boot] Want to study U-Boot code
 
Wolfgang Denk
- [U-Boot] [PATCH 02/10] lcd,	tegra: remove unused cursor functions
 
Simon Glass
- [U-Boot] powerpc/mpc85xx: Add revision properties in portal device	tree node 'pme'
 
Jeffrey Ladouceur
- [U-Boot] [PATCH 4/7] EXYNOS5: GPIO to enable MAX98095
 
Simon Glass
- [U-Boot] [PATCH 6/7] EXYNOS5: Add initial DTS file for Snow.
 
Simon Glass
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
 
Fleming Andy-AFLEMING
- [U-Boot] [PATCH] corenet: Disable video on P2020DS
 
Tom Rini
- [U-Boot] [PATCH 6/7 v5] TMU: Add TMU support in dtt command
 
Simon Glass
- [U-Boot] [PATCH 6/9 v6] TMU: Add TMU support in dtt command
 
Simon Glass
- [U-Boot] [PATCH 7/7] EXYNOS5: Snow: Add a configuration file
 
Simon Glass
- [U-Boot] [PATCH 2/7 V2] Sound: MAX98095: Add the driver for	codec
 
Simon Glass
- [U-Boot] [PATCH 3/7 V2] Sound: Support for MAX98095 codec in	driver
 
Simon Glass
- [U-Boot] [PATCH 4/7 V2] EXYNOS5: GPIO to enable MAX98095
 
Simon Glass
- [U-Boot] [PATCH 5/7 V2] EXYNOS5: FDT: Add compatible strings	for MAX98095
 
Simon Glass
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
 
Tom Warren
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Simon Glass
- [U-Boot] [PATCH] MAKEALL: add support for per architecture	toolchains
 
Simon Glass
- [U-Boot] [PATCH v2 1/7] tegra: usb: set USB_PORTS_MAX to	correct value
 
Simon Glass
- [U-Boot] [PATCH v2 5/7] tegra: usb: various small cleanups
 
Simon Glass
- [U-Boot] [PATCH v2 6/7] tegra: usb: move implementation into	right directory
 
Simon Glass
- [U-Boot] [PATCH] common/lcd.c: cleanup use of global variables
 
Jeroen Hofstee
- [U-Boot] Want to study U-Boot code
 
Robert P. J. Day
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 1/7 V2] EXYNOS5: Add function to enable XXTI	clock source
 
Simon Glass
- [U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device	GD25LQ and GD25Q64B
 
Simon Glass
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Simon Glass
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Lucas Stach
- [U-Boot] [PATCH 04/11] tegra20: switch over tamonten platform to use tablebased pinmux
 
Stephen Warren
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Stephen Warren
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Stephen Warren
- [U-Boot] Please pull u-boot-mpc85xx.git
 
Tom Rini
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Stephen Warren
- [U-Boot] AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
 
Tom Rini
- [U-Boot] [PATCH v2 2/3] pcm051: Add support for Phytec phyCORE-AM335x
 
Tom Rini
- [U-Boot] [U-Boot, v2, 1/1] omap4: allow the use of a plain text env file instead boot scripts
 
Tom Rini
- [U-Boot] [PATCH 04/11] tegra20: switch over tamonten platform to use tablebased pinmux
 
Lucas Stach
- [U-Boot] Add DDR3 support for AM335x-EVM (Version 1.5A)
 
Tom Rini
- [U-Boot] [PATCH v2 1/3] am33xx: add a pulldown macro to pinmux config
 
Tom Rini
- [U-Boot] [PATCH v2 3/3] am335x: display msg when reading MAC from efuse
 
Tom Rini
- [U-Boot] [U-Boot, 1/3] gpio: Build the da8xx_gpio code for the davinci644x device
 
Tom Rini
- [U-Boot] [U-Boot, v2,	1/2] OMAP3: use a single board file for IGEP devices
 
Tom Rini
- [U-Boot] [PATCH 10/11] tegra20: remove old pinmux setup
 
Stephen Warren
- [U-Boot] [U-Boot, v5,	2/2] OMAP3: igep00x0: add boot status GPIO LED
 
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
 
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
 
Fleming Andy-AFLEMING
- [U-Boot] [PATCH 10/11] tegra20: remove old pinmux setup
 
Lucas Stach
- [U-Boot] [PATCH 10/11] tegra20: remove old pinmux setup
 
Stephen Warren
- [U-Boot] Please pull u-boot-mpc85xx.git
 
Tom Rini
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
 
Jaehoon Chung
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
 
Allen Martin
- [U-Boot] Can I read env from RAM in uboot script?
 
John Stile
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect	autoboot timeout
 
Marek Vasut
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
 
Marek Vasut
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove	CONFIG_ARM_DCC_MULTI option
 
Marek Vasut
- [U-Boot] [PATCH 2/2] serial: arm_dcc: Fix compilation warning	and remove unneeded initialization
 
Marek Vasut
- [U-Boot] Can I read env from RAM in uboot script?
 
Wolfgang Denk
- [U-Boot] Please pull u-boot-ti/master
 
Albert ARIBAUD
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
 
Albert ARIBAUD
- [U-Boot] [PATCH] cmd_usb.c: Make usb help info consistent for	"start".
 
Robert P. J. Day
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
 
Robert P. J. Day
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
 
Albert ARIBAUD
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
 
Robert P. J. Day
- [U-Boot] [PATCH 1/1] OMAP3: igep00x0: fix a build warning on IGEP	boards
 
Javier Martinez Canillas
- [U-Boot] Please pull u-boot-ti/master
 
Javier Martinez Canillas
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
 
Albert ARIBAUD
- [U-Boot] [PATCH] cmd_usb.c: Make usb help info consistent for	"start".
 
Robert P. J. Day
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
 
Robert P. J. Day
- [U-Boot] [PATCH v6 2/2] board: add support for amcore board
 
Angelo Dureghello
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Jagan Teki
- [U-Boot] Want to study U-Boot code
 
Woody Wu
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect	autoboot timeout
 
Wolfgang Denk
- [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation
 
Jeroen Hofstee
- [U-Boot] [PATCH 1/1] OMAP3: igep00x0: fix a build warning on	IGEP boards
 
Tom Rini
- [U-Boot] Want to study U-Boot code
 
Javier Martinez Canillas
- [U-Boot] [PATCH] net: nfs: add dynamic wait period
 
Matthias Brugger
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Otavio Salvador
- [U-Boot] Want to study U-Boot code
 
Wolfgang Denk
- [U-Boot] a couple questions about CONFIG_SYS_LONGHELP
 
Albert ARIBAUD
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Albert ARIBAUD
- [U-Boot] [PATCH 02/10] lcd,	tegra: remove unused cursor functions
 
Jeroen Hofstee
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Marek Vasut
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect	autoboot timeout
 
Marek Vasut
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card generation for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH] mxs: mxsboot: Add support for SD card	generation for i.MX23
 
Marek Vasut
- [U-Boot] [PATCH 1/3] mxs: Use SoC agnostic configuration option for	power switch setting
 
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx23: Enable bit 24 of HW_DRAM_CTL08 as did in	imx-bootlets
 
Otavio Salvador
- [U-Boot] [PATCH 3/3] mx23evk: Adjust DRAM control register to use	full 128MB of RAM
 
Otavio Salvador
- [U-Boot] [PATCH 8/9 v6] EXYNOS5: TMU: Add hardware tripping
 
Simon Glass
- [U-Boot] [PATCH 9/9 v6] EXYNOS5: FDT: Add a H/W-trip member to	TMU node
 
Simon Glass
- [U-Boot] [PATCH 1/3 V2] S5P: GPIO: Add generic pin numbering	API's
 
Simon Glass
- [U-Boot] [PATCH 2/3 V2] EXYNOS5: Add gpio pin numbering feature
 
Simon Glass
- [U-Boot] [PATCH 3/3 V2] EXYNOS5: GPIO: Enable GPIO Command for	EXYNOS5
 
Simon Glass
- [U-Boot] [PATCH V5 04/10] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Simon Glass
- [U-Boot] [PATCH V5 05/10] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
 
Simon Glass
- [U-Boot] [PATCH V5 06/10] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
 
Simon Glass
- [U-Boot] [PATCH V5 07/10] MMC: APIs to support resize of EMMC	boot partition
 
Simon Glass
- [U-Boot] [PATCH V5 08/10] SMDK5250: Enable EMMC booting
 
Simon Glass
- [U-Boot] [PATCH V5 09/10] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
 
Simon Glass
- [U-Boot] [PATCH V5 10/10] EXYNOS5: I2C: Added FDT and non-FDT	support for I2C
 
Simon Glass
- [U-Boot] [PATCH 1/3] mxs: Use SoC agnostic configuration option	for power switch setting
 
Marek Vasut
- [U-Boot] [PATCH 2/3] mx23: Enable bit 24 of HW_DRAM_CTL08 as	did in imx-bootlets
 
Marek Vasut
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Vikram Narayanan
- [U-Boot] Possible MMC subsystem bug
 
Marek Vasut
- [U-Boot] Possible MMC subsystem bug
 
Fleming Andy-AFLEMING
- [U-Boot] Possible MMC subsystem bug
 
Marek Vasut
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Albert ARIBAUD
- [U-Boot] [PATCH] configs: mx28evk: Use single-line comments
 
Fabio Estevam
- [U-Boot] [PATCH v2 2/7] tegra: usb: make controller init functions more self contained
 
Simon Glass
- [U-Boot] [PATCH v2 4/7] tegra: usb: move controller init into	start_port
 
Simon Glass
- [U-Boot] [PATCH v2 7/7] tegra: usb: move [start|stop]_port into	ehci_hcd_[init|stop]
 
Simon Glass
- [U-Boot] [PATCH 06/11] tegra20: switch over seaboard and ventana to use tablebased pinmux
 
Simon Glass
- [U-Boot] [PATCH v2 1/3] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to	CONFIG_SPL_MXS_PSWITCH_WAIT
 
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of	HW_DRAM_CTL08) as in imx-bootlets
 
Otavio Salvador
- [U-Boot] [PATCH v2 3/3] mx23evk: Adjust DRAM control register to	use full 128MB of RAM
 
Otavio Salvador
- [U-Boot] [PATCH] configs: mx28evk: Use single-line comments
 
Otavio Salvador
- [U-Boot] [PATCH 0/5] MIPS: start.S: relocate_code fixes and	cleanups
 
Daniel Schwierzeck
- [U-Boot] [PATCH] powerpc/lib: fix unsafe register handling in	wait_ticks
 
Mats Kärrman
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of	HW_DRAM_CTL08) as in imx-bootlets
 
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
 
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx23_olinuxino: Add support for status LED
 
Marek Vasut
- [U-Boot] [PATCH 1/2] led: Use STATUS_LED_ON and STATUS_LED_OFF when	calling __led_set
 
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx23_olinuxino: Add support for status LED
 
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx23_olinuxino: Add support for status LED
 
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] led: Use STATUS_LED_ON and STATUS_LED_OFF	when calling __led_set
 
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status LED
 
Otavio Salvador
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
 
Stephen Warren
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
 
Marek Vasut
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status	LED
 
Fabio Estevam
- [U-Boot] AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
 
Hiremath, Vaibhav
- [U-Boot] [PATCH 4/6] mxs: mmc: Allow overriding default card	detect implementation
 
Stefano Babic
- [U-Boot] [PATCH V2] mxs: Boost the memory power supply
 
Stefano Babic
- [U-Boot] [PATCH v2] mx6qsabreauto: enable USB host interface
 
Stefano Babic
- [U-Boot] [PATCH v2] mx6qsabre_common: Let mmc partition be	board specific
 
Stefano Babic
- [U-Boot] [PATCH] tools: imximage: Let .name field be more	generic
 
Stefano Babic
- [U-Boot] [PATCH] common: env_mmc: Use __weak annotation to	simplify code
 
Stefano Babic
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Jagan Teki
- [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet
 
Stefano Babic
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for	SDHCI_send_command()
 
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Wolfgang Denk
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
 
Lukasz Majewski
- [U-Boot] [RFC] mmc:fix: Increase the timeout value for SDHCI_send_command()
 
Jaehoon Chung
- [U-Boot] [PATCH] powerpc/corenet: Add workaround for ELBC multi-bit	ECC error
 
Shaohui Xie
- [U-Boot] [PATCH] powerpc/p5040: fix mdio mux for 10G port
 
Shaohui Xie
- [U-Boot] [PATCH] powerpc/corenet: set USB2 default mode to 'device'	for (super)hydra boards
 
Shaohui Xie
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Jagan Teki
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Jagan Teki
- [U-Boot] Want to study U-Boot code
 
Woody Wu
- [U-Boot] Is used rootfs dependent from the U-boot command-line?
 
Martin Peevski
- [U-Boot] [PATCH 0/2] gpt: fix partition size limit
 
Piotr Wilczek
- [U-Boot] [PATCH 1/2] vsprintf: add ustrtoll function
 
Piotr Wilczek
- [U-Boot] [PATCH 2/2] gpt: fix partion size limit
 
Piotr Wilczek
- [U-Boot] [PATCH V5 02/10] EXYNOS5: FDT: Add DWMMC device node	data
 
Amarendra Reddy
- [U-Boot] [PATCH V5 03/10] DWMMC: Initialise dwmci and resolve EMMC read write issues
 
Amarendra Reddy
- [U-Boot] [PATCH V5 04/10] EXYNOS5: DWMMC: Added FDT support for	DWMMC
 
Amarendra Reddy
- [U-Boot] [PATCH V5 07/10] MMC: APIs to support resize of EMMC boot partition
 
Amarendra Reddy
- [U-Boot] [PATCH V5 09/10] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
 
Amarendra Reddy
- [U-Boot] [PATCH] powerpc/lib: fix unsafe register handling in wait_ticks
 
Stefan Roese
- [U-Boot] [PATCH V5 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C
 
Amarendra Reddy
- [U-Boot] FAT - problem with new mkcksum implementation
 
Michal Simek
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] [PATCH] Exynos5: Add support for USB download boot mode
 
Vivek Gautam
- [U-Boot] [PATCH 1/2] serial: arm_dcc: Remove	CONFIG_ARM_DCC_MULTI option
 
Michal Simek
- [U-Boot] [PATCH 1/6] mxs: dma: Fix APBH DMA driver for MX23
 
Stefano Babic
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
 
Stefano Babic
- [U-Boot] [PATCH v6 2/2] mx23evk: Add initial board support
 
Stefano Babic
- [U-Boot] [PATCH 0/9 v7] Add TMU support for Exynos5250 based	SMDK5250
 
Akshay Saraswat
- [U-Boot] [PATCH 1/9 v7] EXYNOS5: TMU: Add driver for Thermal	Management Unit
 
Akshay Saraswat
- [U-Boot] [PATCH 2/9 v7] EXYNOS5: Implement board_poweroff for Thermal Management Unit
 
Akshay Saraswat
- [U-Boot] [PATCH 3/9 v7] EXYNOS5: FDT: Add TMU device node values
 
Akshay Saraswat
- [U-Boot] [PATCH 4/9 v7] EXYNOS5: TMU: Add TMU init and status check
 
Akshay Saraswat
- [U-Boot] [PATCH 5/9 v7] EXYNOS5: Config: Enable support for Exynos	TMU driver
 
Akshay Saraswat
- [U-Boot] [PATCH 6/9 v7] TMU: Add TMU support in dtt command
 
Akshay Saraswat
- [U-Boot] [PATCH 7/9 v7] EXYNOS5: Config: Enable dtt command for TMU
 
Akshay Saraswat
- [U-Boot] [PATCH 8/9 v7] EXYNOS5: TMU: Add hardware tripping
 
Akshay Saraswat
- [U-Boot] [PATCH 9/9 v7] EXYNOS5: FDT: Add a H/W-trip member to TMU	node
 
Akshay Saraswat
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Wolfgang Denk
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Wolfgang Denk
- [U-Boot] [PATCH 1/3] mx23evk: Remove unneeded 'undef's
 
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
 
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx23evk: Turn on caches
 
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx23evk: Remove unneeded 'undef's
 
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
 
Otavio Salvador
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status	LED
 
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
 
Marek Vasut
- [U-Boot] [PATCH 3/3] mx23evk: Turn on caches
 
Marek Vasut
- [U-Boot] [PATCH 3/3] mx23evk: Turn on caches
 
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
 
Fabio Estevam
- [U-Boot] [PATCH] am335x: NAND,	add BCH16 and 4k page size support
 
Jordy van Wolferen
- [U-Boot] [PATCH 2/3] mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
 
Marek Vasut
- [U-Boot] FAT - problem with new mkcksum implementation
 
Marek Vasut
- [U-Boot] FAT - problem with new mkcksum implementation
 
Michal Simek
- [U-Boot] u-boot build error [from v2013.01 onwards]
 
Jagan Teki
- [U-Boot] [PATCH] powerpc/lib: fix unsafe register handling in wait_ticks
 
Joakim Tjernlund
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
 
Marek Vasut
- [U-Boot] [PATCH] am335x: NAND: add BCH16 and 4k page size support
 
Jordy van Wolferen
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
 
Marek Vasut
- [U-Boot] FAT - problem with new mkcksum implementation
 
Tom Rini
- [U-Boot] FAT - problem with new mkcksum implementation
 
Michal Simek
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
 
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status	LED
 
Marek Vasut
- [U-Boot] [PATCH v3 1/2] led: Use STATUS_LED_ON and STATUS_LED_OFF	when calling __led_set
 
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status LED
 
Otavio Salvador
- [U-Boot] [PATCH v6 1/2] mx23_olinuxino: Add default environment
 
Marek Vasut
- [U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
 
Michal Simek
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status	LED
 
Marek Vasut
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] mx23_olinuxino: Add support for status	LED
 
Marek Vasut
- [U-Boot] [PATCH v4 1/3] led: Use STATUS_LED_ON and STATUS_LED_OFF	when calling __led_set
 
Otavio Salvador
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during	assembly stage
 
Otavio Salvador
- [U-Boot] [PATCH v4 3/3] mx23_olinuxino: Add support for status LED
 
Otavio Salvador
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build	during assembly stage
 
Marek Vasut
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
 
Otavio Salvador
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
 
Stephen Warren
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build	during assembly stage
 
Marek Vasut
- [U-Boot] [PATCH 02/10] lcd, tegra: remove unused cursor functions
 
Tom Warren
- [U-Boot] [PATCH v2 0/7] Move Tegra EHCI drive to correct place
 
Tom Warren
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
 
Otavio Salvador
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
 
Tom Warren
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build	during assembly stage
 
Marek Vasut
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect	autoboot timeout
 
Marek Vasut
- [U-Boot] [PATCH 1/1 v3] console: USB: KBD: Fix incorrect	autoboot timeout
 
Tom Rini
- [U-Boot] [PATCH v4 2/3] mxs: Fix iomux.h to not break build during assembly stage
 
Otavio Salvador
- [U-Boot] [PATCH v5 1/3] led: Use STATUS_LED_ON and STATUS_LED_OFF	when calling __led_set
 
Otavio Salvador
- [U-Boot] [PATCH v5 2/3] mxs: Fix iomux.h to not break build during	assembly stage
 
Otavio Salvador
- [U-Boot] [PATCH v5 3/3] mx23_olinuxino: Add support for status LED
 
Otavio Salvador
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
 
Albert ARIBAUD
- [U-Boot] [PATCH v4 3/3] mx23_olinuxino: Add support for status	LED
 
Fabio Estevam
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Fabio Estevam
- [U-Boot] [PATCH v4 3/3] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH 1/4] usb: mxs: Disable USB Port 1 for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH 2/4] mx23evk: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH 3/4] mx23_olinuxino: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH 3/4] mx23_olinuxino: Enable USB support
 
Marek Vasut
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Marek Vasut
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Marek Vasut
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Fabio Estevam
- [U-Boot] [PATCH 3/4] mx23_olinuxino: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Fabio Estevam
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Marek Vasut
- [U-Boot] [PATCH v2 4/4] mx23_olinuxino: Add ethernet support
 
Marek Vasut
- [U-Boot] [PATCH v2 1/4] usb: mxs: Disable USB Port 1 for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH v2 2/4] mx23evk: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH v2 3/4] mx23_olinuxino: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH v2 4/4] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH 4/4] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH v2 4/4] mx23_olinuxino: Add ethernet support
 
Fabio Estevam
- [U-Boot] [PATCH v2 4/4] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH v3 1/4] usb: mxs: Disable USB Port 1 for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH v3 2/4] mx23evk: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH v3 3/4] mx23_olinuxino: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH v3 4/4] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] Can I read env from RAM in uboot script?
 
John Stile
- [U-Boot] Can I read env from RAM in uboot script?
 
Jeroen Hofstee
- [U-Boot] Can I read env from RAM in uboot script?
 
Jeroen Hofstee
- [U-Boot] [PULL] : Please pull u-boot-imx
 
Stefano Babic
- [U-Boot] [PATCH] tegra: fdt: add back missing host1x node
 
Allen Martin
- [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files
 
Tom Warren
- [U-Boot] [PATCH v3 2/7] Tegra114: Add AVP (arm720t) files
 
Tom Warren
- [U-Boot] [PATCH v3 3/7] Tegra114: Add CPU (armv7) files
 
Tom Warren
- [U-Boot] [PATCH v3 4/7] Tegra114: Add common CPU (shared) files
 
Tom Warren
- [U-Boot] [PATCH v3 5/7] Tegra114: Dalmore: Add DT files
 
Tom Warren
- [U-Boot] [PATCH v3 6/7] Tegra114: Add generic Tegra114 build support
 
Tom Warren
- [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114	reference board)
 
Tom Warren
- [U-Boot] [PATCH v3 0/7] Add support for NVIDIA Tegra114 SoC
 
Tom Warren
- [U-Boot] Can I read env from RAM in uboot script?
 
John Stile
- [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include	files
 
Stephen Warren
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of	HW_DRAM_CTL08) as in imx-bootlets
 
Marek Vasut
- [U-Boot] [PATCH] mxs: Reset the EMI block on mx23
 
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of	HW_DRAM_CTL08) as in imx-bootlets
 
Marek Vasut
- [U-Boot] smdk2416 support?
 
Woody Wu
- [U-Boot] smdk2416 support?
 
Woody Wu
- [U-Boot] [PATCH 1/1] console: Improve TFTP booting performance
 
Jim Lin
- [U-Boot] Can I read env from RAM in uboot script?
 
Wolfgang Denk
- [U-Boot] [PATCH 0/2] Davinci: MAC address updates
 
Kim Bøndergaard
- [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM	configurable, CONFIG_MAC_EEPROM_ADDR
 
Kim Bøndergaard
- [U-Boot] [PATCH 2/2] Davinci: Fix,	console output confusing while setting MAC address
 
Kim Bøndergaard
- [U-Boot]  [PULL] : Please pull u-boot-i2c
 
Heiko Schocher
- [U-Boot] [PATCH 1/2] powerpc/t4240qds: Fix SPI flash type
 
Shaohui Xie
- [U-Boot] [PATCH 2/2] powerpc/t4240qds: fix XAUI card PHY address
 
Shaohui Xie
- [U-Boot] [PATCH] powerpc/Fman/mEMAC: mEMAC fix for 10G MAC and PHY
 
Shaohui Xie
- [U-Boot] [PATCH] net/phy: add VSC8574 support
 
Shaohui Xie
- [U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
 
Gabor Juhos
- [U-Boot] [PATCH 2/7] MIPS: qemu-mips: use the unified u-boot.lds	script
 
Gabor Juhos
- [U-Boot] [PATCH 3/7] MIPS: pb1x00: remove custom u-boot.lds script
 
Gabor Juhos
- [U-Boot] [PATCH 4/7] MIPS: vct: remove custom u-boot.lds script
 
Gabor Juhos
- [U-Boot] [PATCH 5/7] MIPS: incaip: remove custom u-boot.lds script
 
Gabor Juhos
- [U-Boot] [PATCH 6/7] MIPS: dbau1x00: remove custom u-boot.lds script
 
Gabor Juhos
- [U-Boot] [PATCH 7/7] MIPS: qi_lb60: remove custom u-boot.lds script
 
Gabor Juhos
- [U-Boot] CONFIG_SYS_TEXT_BASE and relocaddr
 
Luca Ellero
- [U-Boot] [PATCH 4/7] MIPS: vct: remove custom u-boot.lds script
 
Stefan Roese
- [U-Boot] smdk2416 support?
 
Woody Wu
- [U-Boot] CONFIG_SYS_TEXT_BASE and relocaddr
 
Wolfgang Denk
- [U-Boot] Can I read env from RAM in uboot script?
 
Bo Shen
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
 
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
 
Otavio Salvador
- [U-Boot] [PATCH] mxs: Reset the EMI block on mx23
 
Otavio Salvador
- [U-Boot] [PATCH 4/7] MIPS: vct: remove custom u-boot.lds script
 
Gabor Juhos
- [U-Boot] [PATCH v3 1/3] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to	CONFIG_SPL_MXS_PSWITCH_WAIT
 
Otavio Salvador
- [U-Boot] [PATCH v3 2/3] mx23: Document the tRAS lockout setting in	memory initialization
 
Otavio Salvador
- [U-Boot] [PATCH v3 3/3] mx23evk: Adjust DRAM control register to	use full 128MB of RAM
 
Otavio Salvador
- [U-Boot] [PATCH v6 1/3] led: Use STATUS_LED_ON and STATUS_LED_OFF	when calling __led_set
 
Otavio Salvador
- [U-Boot] [PATCH v6 2/3] mxs: Fix iomux.h to not break build during	assembly stage
 
Otavio Salvador
- [U-Boot] [PATCH v6 3/3] mx23_olinuxino: Add support for status LED
 
Otavio Salvador
- [U-Boot] [PATCH v4 1/4] usb: mxs: Disable USB Port 1 for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH v4 2/4] mx23evk: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH v4 3/4] mx23_olinuxino: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH v4 4/4] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
 
Daniel Schwierzeck
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of	HW_DRAM_CTL08) as in imx-bootlets
 
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of	HW_DRAM_CTL08) as in imx-bootlets
 
Marek Vasut
- [U-Boot] [PATCH v2 2/3] mx23: Enable tRAS lockout (24 bit of HW_DRAM_CTL08) as in imx-bootlets
 
Otavio Salvador
- [U-Boot] [PATCH 1/3] sf: stmicro: Add support for N25Q32
 
Michal Simek
- [U-Boot] [PATCH 2/3] sf: stmicro: Add support for N25Q32A
 
Michal Simek
- [U-Boot] [PATCH 3/3] sf: stmicro: Add support for N25Q256A
 
Michal Simek
- [U-Boot] [PATCH v3 1/3] mxs: Rename	CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT
 
Marek Vasut
- [U-Boot] [PATCH V2 0/7] Add splash screen for CM-T35
 
Nikita Kiryanov
- [U-Boot] [PATCH V1 1/7] omap3: add useful dss defines
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 2/7] omap3: allow dynamic selection of gfx_format
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access when	displaying splash screen
 
Nikita Kiryanov
- [U-Boot] [PATCH V1 4/7] lcd: add option for board specific splash	screen preparation
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 5/7] cm-t35: add support for dvi displays
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd	parameters
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash	image from NAND
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access	when displaying splash screen
 
Wolfgang Denk
- [U-Boot] [PATCH V1 4/7] lcd: add option for board specific	splash screen preparation
 
Wolfgang Denk
- [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined	lcd parameters
 
Wolfgang Denk
- [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash	image from NAND
 
Wolfgang Denk
- [U-Boot] [PATCH V2 2/7] omap3: allow dynamic selection of	gfx_format
 
Wolfgang Denk
- [U-Boot] [PATCH V1 1/7] omap3: add useful dss defines
 
Wolfgang Denk
- [U-Boot] Current state and existing users of FIT (Flattened Image	Tree)?
 
Joel A Fernandes
- [U-Boot] [PATCH V2 5/7] cm-t35: add support for dvi displays
 
Wolfgang Denk
- [U-Boot] [PATCH V1 1/7] omap3: add useful dss defines
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 2/7] omap3: allow dynamic selection of	gfx_format
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access when displaying splash screen
 
Nikita Kiryanov
- [U-Boot] [PATCH V1 4/7] lcd: add option for board specific splash screen preparation
 
Nikita Kiryanov
- [U-Boot] [PATCH] mmc:sdhci:fix: Change default interrupts enabled at SDHCI initialization
 
Lukasz Majewski
- [U-Boot] [PATCH V2 5/7] cm-t35: add support for dvi displays
 
Nikita Kiryanov
- [U-Boot] CONFIG_SYS_TEXT_BASE and relocaddr
 
Luca Ellero
- [U-Boot] [PATCH 1/4] usb:composite: USB Mass Storage - storage_common.c from Linux kernel
 
Piotr Wilczek
- [U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
 
Mats Kärrman
- [U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
 
Gabor Juhos
- [U-Boot] Can I read env from RAM in uboot script?
 
John Stile
- [U-Boot] Help : Marvell SDIO/MMC driver for Sheevaplug
 
DrEagle
- [U-Boot] Help : Marvell SDIO/MMC driver for Sheevaplug
 
Jagan Teki
- [U-Boot] [PATCH 0/2] Add I2C driver for Tegra114 Dalmore
 
Tom Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info	for T114/Dalmore
 
Tom Warren
- [U-Boot] [PATCH 2/2] Tegra114: I2C: Enable I2C driver on Dalmore	E1611 eval board
 
Tom Warren
- [U-Boot] [PATCH] am335x: NAND: add BCH16 and 4k page size support
 
Scott Wood
- [U-Boot] [PATCH] am335x: NAND: add BCH16 and 4k page size	support
 
Tom Rini
- [U-Boot] [PATCH] powerpc/corenet: Add workaround for ELBC multi-bit ECC error
 
Scott Wood
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
 
Stephen Warren
- [U-Boot] [PATCH 2/2] Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
 
Stephen Warren
- [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM configurable, CONFIG_MAC_EEPROM_ADDR
 
Tom Rini
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
 
Tom Warren
- [U-Boot] [PATCH 2/2] Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
 
Tom Warren
- [U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
 
Andrew Dyer
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
 
Stephen Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
 
Tom Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
 
Stephen Warren
- [U-Boot] [U-Boot,GIT,PULL] u-boot-mpc83xx: support for new SPL
 
Tom Rini
- [U-Boot] [PULL] : Please pull u-boot-i2c
 
Tom Rini
- [U-Boot] MX23 patches
 
Marek Vasut
- [U-Boot] MX23 patches
 
stefano babic
- [U-Boot] MX23 patches
 
Otavio Salvador
- [U-Boot] MX23 patches
 
Marek Vasut
- [U-Boot] [PATCH v4 0/7] tegra: SPI drivers
 
Allen Martin
- [U-Boot] [PATCH v4 1/7] tegra20: fdt: add SPI SFLASH node
 
Allen Martin
- [U-Boot] [PATCH v4 2/7] tegra: spi: add fdt support to tegra SPI	SFLASH driver
 
Allen Martin
- [U-Boot] [PATCH v4 3/7] tegra30: add SBC1 to periph id mapping table
 
Allen Martin
- [U-Boot] [PATCH v4 4/7] tegra30: fdt: add SPI SLINK nodes
 
Allen Martin
- [U-Boot] [PATCH v4 5/7] tegra: add addresses of SPI SLINK	controllers
 
Allen Martin
- [U-Boot] [PATCH v4 6/7] tegra: add SPI SLINK driver
 
Allen Martin
- [U-Boot] [PATCH v4 7/7] tegra: cardhu: config: enable SPI
 
Allen Martin
- [U-Boot] [PATCH 3/4] common: cmd_bdinfo: Fix compilation warning	for microblaze
 
Rommel Custodio
- [U-Boot] [PATCH v4 0/7] tegra: SPI drivers
 
Allen Martin
- [U-Boot] [PATCH v4 1/7] tegra20: fdt: add SPI SFLASH node
 
Stephen Warren
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
 
Stephen Warren
- [U-Boot] [PATCH v2] MAKEALL: add support for per architecture	toolchains
 
Allen Martin
- [U-Boot] Can I read env from RAM in uboot script?
 
Bo Shen
- [U-Boot] [PATCH] ARM: atmel: add at91sam9g20ek_2mmc nand boot	support
 
Bo Shen
- [U-Boot] [PATCH v2] MAKEALL: add support for per architecture	toolchains
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 1/7] ARM: bcm2835: add mailbox driver
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 2/7] ARM: rpi_b: use bcm2835 mbox	driver to get memory size
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 3/7] lcd: calculate line_length after	lcd_ctrl_init()
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 4/7] ARM: rpi_b: disable rpi_b dcache	explicitly
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 5/7] video: add a driver for the bcm2835
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 6/7] mmc: add bcm2835 driver
 
Stephen Warren
- [U-Boot] [PATCH V5 REPOST 2 7/7] ARM: rpi_b: enable SD controller,	add related env/cmds
 
Stephen Warren
- [U-Boot] [PATCH] powerpc/corenet: Add workaround for ELBC multi-bit ECC error
 
Xie Shaohui-B21989
- [U-Boot] CONFIG_DELAY_ENVIRONMENT usage
 
Allen Martin
- [U-Boot] [PATCH] mmc:sdhci:fix: Change default interrupts enabled at SDHCI initialization
 
Jaehoon Chung
- [U-Boot] [PATCH] mmc: support the correct card version for eMMC
 
Jaehoon Chung
- [U-Boot] Watchdog of OMAP3530 in u-boot
 
gurucharanch at uurmi.com
- [U-Boot] CONFIG_DELAY_ENVIRONMENT usage
 
Lucas Stach
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
 
Laxman Dewangan
- [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd parameters
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash image from NAND
 
Nikita Kiryanov
- [U-Boot] [PATCH] mmc: check the revision for sd3.0
 
Jaehoon Chung
- [U-Boot] MMC - Error detected in status(0x208100)!
 
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 0/10] mx23/mxs pending patches
 
Otavio Salvador
- [U-Boot] [PATCH 01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to	CONFIG_SPL_MXS_PSWITCH_WAIT
 
Otavio Salvador
- [U-Boot] [PATCH 02/10] mx23: Document the tRAS lockout setting in	memory initialization
 
Otavio Salvador
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use	full 128MB of RAM
 
Otavio Salvador
- [U-Boot] [PATCH 04/10] led: Use STATUS_LED_ON and STATUS_LED_OFF	when calling __led_set
 
Otavio Salvador
- [U-Boot] [PATCH 05/10] mxs: Fix iomux.h to not break build during	assembly stage
 
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
 
Otavio Salvador
- [U-Boot] [PATCH 07/10] usb: mxs: Disable USB Port 1 for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH 08/10] mx23evk: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH 09/10] mx23_olinuxino: Enable USB support
 
Otavio Salvador
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] MMC - Error detected in status(0x208100)!
 
Jaehoon Chung
- [U-Boot] [PATCH 1/4] board: xilinx: Remove unused ancient i2c driver
 
Rommel G Custodio
- [U-Boot] MMC - Error detected in status(0x208100)!
 
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 2/4] board: xilinx: Remove common folder
 
Rommel G Custodio
- [U-Boot] [PATCH] MIPS: remove OUTPUT_FORMAT from linker scripts
 
Gabor Juhos
- [U-Boot] [PATCH 05/10] mxs: Fix iomux.h to not break build during assembly stage
 
Fabio Estevam
- [U-Boot] [PATCH 05/10] mxs: Fix iomux.h to not break build during assembly stage
 
Otavio Salvador
- [U-Boot] [PATCH] PHY: micrel.c: add support for KSZ9031
 
David Andrey
- [U-Boot] Help : Marvell SDIO/MMC driver for Sheevaplug
 
Rommel G Custodio
- [U-Boot] can i in u-boot partition a device and format it in fat ?
 
Altunbas Sabri (DC-IA/EAH2)
- [U-Boot] [PATCH 1/4] board: xilinx: Remove unused ancient i2c driver
 
Heiko Schocher
- [U-Boot] [PATCH 02/10] mx23: Document the tRAS lockout setting	in memory initialization
 
Marek Vasut
- [U-Boot] [PATCH 01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT	to CONFIG_SPL_MXS_PSWITCH_WAIT
 
Marek Vasut
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to	use full 128MB of RAM
 
Marek Vasut
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Marek Vasut
- [U-Boot] [PATCH 07/10] usb: mxs: Disable USB Port 1 for i.MX23
 
Marek Vasut
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
 
Marek Vasut
- [U-Boot] [PATCH v2 0/7] MIPS: use an unified u-boot.lds script
 
Gabor Juhos
- [U-Boot] [PATCH v2 0/7] MIPS: use an unified u-boot.lds script
 
Gabor Juhos
- [U-Boot] [PATCH v2 1/7] MIPS: add unified u-boot.lds file
 
Gabor Juhos
- [U-Boot] [PATCH v2 2/7] MIPS: qemu-mips: use the unified u-boot.lds	script
 
Gabor Juhos
- [U-Boot] [PATCH v2 3/7] MIPS: pb1x00: remove custom u-boot.lds	script
 
Gabor Juhos
- [U-Boot] [PATCH v2 4/7] MIPS: vct: remove custom u-boot.lds script
 
Gabor Juhos
- [U-Boot] [PATCH v2 5/7] MIPS: incaip: remove custom u-boot.lds	script
 
Gabor Juhos
- [U-Boot] [PATCH v2 6/7] MIPS: dbau1x00: remove custom u-boot.lds	script
 
Gabor Juhos
- [U-Boot] [PATCH v2 7/7] MIPS: qi_lb60: remove custom u-boot.lds	script
 
Gabor Juhos
- [U-Boot] [PATCH v2 1/7] MIPS: add unified u-boot.lds file
 
Stefan Roese
- [U-Boot] [PATCH] MIPS: xburst: simplify relocation offset	calculation
 
Gabor Juhos
- [U-Boot] [PATCH v2] MIPS: simplify relocated _G_O_T_ address	calculation
 
Gabor Juhos
- [U-Boot] [PATCH v2 1/7] MIPS: add unified u-boot.lds file
 
Gabor Juhos
- [U-Boot] can i in u-boot partition a device and format it in	fat ?
 
Wolfgang Denk
- [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
 
Tom Warren
- [U-Boot] [PATCH 02/10] mx23: Document the tRAS lockout setting	in memory initialization
 
Otavio Salvador
- [U-Boot] [PATCH 01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT	to CONFIG_SPL_MXS_PSWITCH_WAIT
 
Otavio Salvador
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
 
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] [PATCH 07/10] usb: mxs: Disable USB Port 1 for i.MX23
 
Otavio Salvador
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to	use full 128MB of RAM
 
Marek Vasut
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Marek Vasut
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
 
Marek Vasut
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
 
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to	use full 128MB of RAM
 
Marek Vasut
- [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
 
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Marek Vasut
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
 
Marek Vasut
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
 
Otavio Salvador
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Marek Vasut
- [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
 
Marek Vasut
- [U-Boot] memory block device?
 
Stijn Souffriau -X (ssouffri - Sioux Embedded System at Cisco)
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Otavio Salvador
- [U-Boot] Please pull u-boot-mpc85xx.git
 
Andy Fleming
- [U-Boot] CONFIG_DELAY_ENVIRONMENT usage
 
Allen Martin
- [U-Boot] How to boot split kernel/image of jffs2 partition?
 
Steve deRosier
- [U-Boot] [RFC] Add Nitrogen6x support.
 
Eric Nelson
- [U-Boot] [RFC PATCH] Add support for Boundary Devices Nitrogen6x boards
 
Eric Nelson
- [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status	LED
 
Marek Vasut
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
 
Allen Martin
- [U-Boot] [RFC Patch v6] Consolidate bool type
 
York Sun
- [U-Boot] memory block device?
 
Wolfgang Denk
- [U-Boot] [RFC Patch v6] Consolidate bool type
 
Allen Martin
- [U-Boot] [RFC Patch v6] Consolidate bool type
 
York Sun
- [U-Boot] [PATCH 1/6] imx: mx6q DDR3 init: Fix tMRD
 
Benoît Thébaudeau
- [U-Boot] [PATCH 2/6] imx: mx6q DDR3 init: Fix tXPR
 
Benoît Thébaudeau
- [U-Boot] [PATCH 3/6] imx: mx6q DDR3 init: Fix SDE_to_RST
 
Benoît Thébaudeau
- [U-Boot] [PATCH 4/6] imx: mx6q DDR3 init: Fix RST_to_CKE
 
Benoît Thébaudeau
- [U-Boot] [PATCH 5/6] imx: mx6q DDR3 init: Fix MR0.PPD
 
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] imx: mx6q DDR3 init: Benefit from available CL	= 7
 
Benoît Thébaudeau
- [U-Boot] [RFC Patch v6] Consolidate bool type
 
Allen Martin
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
 
Allen Martin
- [U-Boot] [RFC Patch v6] Consolidate bool type
 
York Sun
- [U-Boot] [Patch v7] Consolidate bool type
 
York Sun
- [U-Boot] Please pull u-boot-mpc85xx.git
 
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
 
Andy Fleming
- [U-Boot] [RFC Patch v6] Consolidate bool type
 
Allen Martin
- [U-Boot] [PATCH] env: Allow accessing non-mtd devices
 
Lubomir Rintel
- [U-Boot] [PATCH v2] MIPS: simplify relocated _G_O_T_ address	calculation
 
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: xburst: simplify relocation offset	calculation
 
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: remove OUTPUT_FORMAT from linker scripts
 
Daniel Schwierzeck
- [U-Boot] [PATCH v2 0/7] MIPS: use an unified u-boot.lds script
 
Daniel Schwierzeck
- [U-Boot] [GIT PULL] u-boot-mips/master
 
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: start.S: remove obsolete 64 bit handling in	setup_c0_status
 
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] MIPS: start.S: unify and simplify reset vector	handling
 
daniel.schwierzeck at gmail.com
- [U-Boot] [GIT PULL] u-boot-mips/master
 
Tom Rini
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
 
Tom Rini
- [U-Boot] [U-Boot, v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
 
Tom Rini
- [U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
 
Allen Martin
- [U-Boot] MMC - Error detected in status(0x208100)!
 
Rommel Custodio
- [U-Boot] [PATCH] mmc: check the revision for sd3.0
 
Rommel Custodio
- [U-Boot] [PATCH] powerpc/mpc85xx: add setting of clock-frequency	for mpic node
 
Wang Dongsheng
- [U-Boot] [PATCH 0/7] ARM: OMAP4+: Cleanup clocks,	control and emif code
 
R Sricharan
- [U-Boot] [PATCH 1/7] ARM: OMAP4+: emif: Detect SDRAM from SDRAM	config register
 
R Sricharan
- [U-Boot] [PATCH 2/7] ARM: OMAP4+: Change the PRCM structure	prototype common for all Socs
 
R Sricharan
- [U-Boot] [PATCH 3/7] ARM: OMAP4+: Cleanup the clocks layer
 
R Sricharan
- [U-Boot] [PATCH 4/7] ARM: OMAP4+: Clean up the pmic code
 
R Sricharan
- [U-Boot] [PATCH 5/7] ARM: OMAP4+: Cleanup emif specific files
 
R Sricharan
- [U-Boot] [PATCH 6/7] ARM: OMAP4+: Make control module register	structure generic
 
R Sricharan
- [U-Boot] [PATCH 7/7] ARM: OMAP5: Clean up iosettings code
 
R Sricharan
- [U-Boot] [PATCH 0/5] ARM: OMAP5: Add support for OMAP543x ES2.0 Socs
 
R Sricharan
- [U-Boot] [PATCH 1/5] ARM: OMAP5: Add silicon id support for ES2.0	revision.
 
R Sricharan
- [U-Boot] [PATCH 2/5] ARM: OMAP5: clock: Add the prcm register	changes required for ES2.0
 
R Sricharan
- [U-Boot] [PATCH 3/5] ARM: OMAP5: clocks: Add OPP settings required	for OMAP543X ES2.0 soc
 
R Sricharan
- [U-Boot] [PATCH 4/5] ARM: OMAP5: Add DDR changes required for	OMAP543X ES2.0 SOCs
 
R Sricharan
- [U-Boot] [PATCH 5/5] ARM: OMAP5: srcomp: enable slew rate	compensation cells after powerup
 
R Sricharan
- [U-Boot] [PATCH] env: Allow accessing non-mtd devices
 
Wolfgang Denk
- [U-Boot] [PATCH] serial/ns16550: don't generate functions for undefined ports
 
McClintock Matthew-B29882
- [U-Boot] [PATCH V3 0/7] Add splash screen for CM-T35
 
Nikita Kiryanov
- [U-Boot] [PATCH V3 1/7] omap3: add useful dss defines
 
Nikita Kiryanov
- [U-Boot] [PATCH V3 2/7] omap3: allow dynamic selection of gfx_format
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access when	displaying splash screen
 
Nikita Kiryanov
- [U-Boot] [PATCH V1 4/7] lcd: add option for board specific splash	screen preparation
 
Nikita Kiryanov
- [U-Boot] [PATCH V3 5/7] cm-t35: add support for dvi displays
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd	parameters
 
Nikita Kiryanov
- [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash	image from NAND
 
Nikita Kiryanov
- [U-Boot] Virtex 4 with XMD
 
Frank Lombardo
- [U-Boot] [PATCH 0/7] omap mmc: implement card detect and write protection
 
Igor Grinberg
- [U-Boot] Virtex 4 with XMD
 
Rommel Custodio
- [U-Boot] [PATCH] MIPS: start.S: remove obsolete 64 bit handling	in setup_c0_status
 
Gabor Juhos
- [U-Boot] Virtex 4 with XMD
 
Rommel Custodio
- [U-Boot] [PATCH] MIPS: start.S: unify and simplify reset vector	handling
 
Gabor Juhos
- [U-Boot] [PATCH] env: Allow accessing non-mtd devices
 
Lubomir Rintel
- [U-Boot] [U-boot] mkimage -F parameter
 
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH] mmc: support the correct card version for eMMC
 
Jaehoon Chung
- [U-Boot] [PATCH] fw_env.config: Correct "fw_saveenv" to "fw_setenv".
 
Robert P. J. Day
- [U-Boot] anyone implemented a failsafe upgrade involving two kernel/rootfs pairs?
 
Robert P. J. Day
- [U-Boot] [U-boot] mkimage -F parameter
 
Wolfgang Denk
- [U-Boot] anyone implemented a failsafe upgrade involving two	kernel/rootfs pairs?
 
Wolfgang Denk
- [U-Boot] [PATCH] env: Allow accessing non-mtd devices
 
Wolfgang Denk
- [U-Boot] anyone implemented a failsafe upgrade involving two kernel/rootfs pairs?
 
Robert P. J. Day
- [U-Boot] [PATCH] arm: fix bug on relocation address
 
Luca Ellero
- [U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
 
Joe Hershberger
- [U-Boot] [PATCH 1/7] ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register
 
Tom Rini
- [U-Boot] [PATCH 2/7] ARM: OMAP4+: Change the PRCM structure prototype common for all Socs
 
Tom Rini
- [U-Boot] [PATCH 3/7] ARM: OMAP4+: Cleanup the clocks layer
 
Tom Rini
- [U-Boot] [PATCH 4/7] ARM: OMAP4+: Clean up the pmic code
 
Tom Rini
- [U-Boot] [PATCH 5/7] ARM: OMAP4+: Cleanup emif specific files
 
Tom Rini
- [U-Boot] [PATCH 6/7] ARM: OMAP4+: Make control module register structure generic
 
Tom Rini
- [U-Boot] [PATCH 7/7] ARM: OMAP5: Clean up iosettings code
 
Tom Rini
- [U-Boot] [PATCH 1/5] ARM: OMAP5: Add silicon id support for ES2.0 revision.
 
Tom Rini
- [U-Boot] [PATCH 2/5] ARM: OMAP5: clock: Add the prcm register changes required for ES2.0
 
Tom Rini
- [U-Boot] [PATCH 3/5] ARM: OMAP5: clocks: Add OPP settings required for OMAP543X ES2.0 soc
 
Tom Rini
- [U-Boot] [PATCH 4/5] ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs
 
Tom Rini
- [U-Boot] [PATCH 5/5] ARM: OMAP5: srcomp: enable slew rate compensation cells after powerup
 
Tom Rini
- [U-Boot] patman changes?
 
Doug Anderson
- [U-Boot] patman changes?
 
Tom Rini
- [U-Boot] [U-Boot,v2 6/6] sf: Set QUAD enable bit support
 
Jagan Teki
- [U-Boot] anyone implemented a failsafe upgrade involving two	kernel/rootfs pairs?
 
Wolfgang Denk
- [U-Boot] [PATCH] arm: fix bug on relocation address
 
Jeroen Hofstee
- [U-Boot] vfat: Fix mkcksum argument sizes
 
Tom Rini
- [U-Boot] [PATCH] nand/mxc: set host->page_addr for NAND_CMD_READOOB
 
Scott Wood
- [U-Boot] call env print from uboot environment
 
John Stile
- [U-Boot] [PATCH] nand/mxc: set host->page_addr for NAND_CMD_READOOB
 
Benoît Thébaudeau
- [U-Boot] vfat: Fix mkcksum argument sizes
 
Marek Vasut
- [U-Boot] [ANNOUNCE] Release v2013.01.01
 
Tom Rini
- [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM configurable, CONFIG_MAC_EEPROM_ADDR
 
Tom Rini
- [U-Boot] call env print from uboot environment
 
Wolfgang Denk
- [U-Boot] [PATCH] nand/mxc: set host->page_addr for NAND_CMD_READOOB
 
Scott Wood
    
      Last message date: 
       Thu Jan 31 23:36:11 CET 2013
    Archived on: Thu Jan 31 23:36:25 CET 2013
    
   
     
     
     This archive was generated by
     Pipermail 0.09 (Mailman edition).