[U-Boot] MMC - Error detected in status(0x208100)!

[Jagannadha Sutradharudu Teki]

Hi Jaehoon Chung,

> -----Original Message-----
> From: Jaehoon Chung [mailto:jh80.chung at samsung.com]
> Sent: 30 January 2013 17:44
> To: Jagannadha Sutradharudu Teki
> Cc: afleming at freescale.com; u-boot at lists.denx.de
> Subject: Re: [U-Boot] MMC - Error detected in status(0x208100)!
>
> On 01/30/2013 07:48 PM, Jagannadha Sutradharudu Teki wrote:
> > Hi Andy,
> >
> > The latest patch "mmc: Properly determine maximum supported bus
> width"
> > (sha1: 7798f6dbd5e1a3030ed81a81da5dfb57c3307cac) is causing some
> error
> > status issue on zynq platform with MMC Plus cards.
> >
> > Here the out what I get with inclusion of this patch on u-boot tree.
> > zynq-uboot> mmcinfo
> > Error detected in status(0x208100)!
> > Device: zynq_sdhci
> > Manufacturer ID: 1e
> > OEM: ffff
> > Name: MMC
> > Tran Speed: 52000000
> > Rd Block Len: 512
> > MMC version 4.0
> > High Capacity: No
> > Capacity: 1.9 GiB
> > Bus Width: 4-bit
> >
> > When I revert this path, I am unable to see the status error.
> > zynq-uboot> mmcinfo
> > Device: zynq_sdhci
> > Manufacturer ID: 1e
> > OEM: ffff
> > Name: MMC
> > Tran Speed: 52000000
> > Rd Block Len: 512
> > MMC version 4.0
> > High Capacity: No
> > Capacity: 1.9 GiB
> > Bus Width: 12-bit
> >
> > I think the above one is also a buggy as my controller is unable to support
> 12-bit bus width.?
> Could you check which bus_width support at your controller?
> I guess it is set to wrong buswidth.

Yes, this what the buggy message is for.
My controller supports only 1 and 4-bit.

Thanks,
Jagan.


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.