[U-Boot] [PATCH 7/9] mx23_olinuxino: Add default environment
Marek Vasut
marex at denx.de
Tue Jan 22 02:49:04 CET 2013
Dear Otavio Salvador,
Description missing.
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> ---
> include/configs/mx23_olinuxino.h | 90
> +++++++++++++++++++++++++++++++++++++++- 1 file changed, 89 insertions(+),
> 1 deletion(-)
>
> diff --git a/include/configs/mx23_olinuxino.h
> b/include/configs/mx23_olinuxino.h index a62e3a2..7d34168 100644
> --- a/include/configs/mx23_olinuxino.h
> +++ b/include/configs/mx23_olinuxino.h
> @@ -140,9 +140,97 @@
> #define CONFIG_SETUP_MEMORY_TAGS
> #define CONFIG_BOOTDELAY 3
> #define CONFIG_BOOTFILE "uImage"
> -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
No need to remove this.
> #define CONFIG_LOADADDR 0x42000000
> #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> #define CONFIG_OF_LIBFDT
>
> +/*
> + * Extra Environments
> + */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "update_sd_firmware_filename=u-boot.sd\0" \
> + "update_nand_full_filename=u-boot.nand\0" \
> + "update_nand_firmware_filename=u-boot.sb\0" \
> + "update_sd_firmware_filename=u-boot.sd\0" \
> + "update_nand_firmware_maxsz=0x100000\0" \
> + "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
> + "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
> + "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
This board has no NAND.
Best regards,
Marek Vasut
More information about the U-Boot
mailing list