[U-Boot] [PATCH v2] powerpc/mpc85xx: add support for MMUv2 page sizes
Scott Wood
scottwood at freescale.com
Sat Jan 19 02:45:58 CET 2013
e6500 implements MMUv2 and supports power-of-2 page sizes rather than
power-of-4. Add support for such pages.
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
v2: remove #ifdef CONFIG_SPL_MINIMAL around printf -- the whole function
is in an area not built in the SPL
arch/powerpc/cpu/mpc85xx/start.S | 2 +-
arch/powerpc/cpu/mpc85xx/tlb.c | 19 ++++++++++----
arch/powerpc/include/asm/mmu.h | 52 +++++++++++++++++++++++++-------------
3 files changed, 49 insertions(+), 24 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index bb0dc1a..fb67469 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -449,7 +449,7 @@ nexti: mflr r1 /* R1 = our PC */
/* Set the size of the TLB to 4KB */
mfspr r3, MAS1
- li r2, 0xF00
+ li r2, 0xF80
andc r3, r3, r2 /* Clear the TSIZE bits */
ori r3, r3, MAS1_TSIZE(BOOKE_PAGESZ_4K)@l
oris r3, r3, MAS1_IPROT at h
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index f44fadc..23d3357 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -66,7 +66,7 @@ void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
_mas1 = mfspr(MAS1);
*valid = (_mas1 & MAS1_VALID);
- *tsize = (_mas1 >> 8) & 0xf;
+ *tsize = (_mas1 >> 7) & 0x1f;
*epn = mfspr(MAS2) & MAS2_EPN;
*rpn = mfspr(MAS3) & MAS3_RPN;
#ifdef CONFIG_ENABLE_36BIT_PHYS
@@ -156,6 +156,13 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
if (tlb == 1)
use_tlb_cam(esel);
+ if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1 &&
+ tsize & 1) {
+ printf("%s: bad tsize %d on entry %d at 0x%08x\n",
+ __func__, tsize, tlb, epn);
+ return;
+ }
+
_mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
_mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
_mas2 = FSL_BOOKE_MAS2(epn, wimge);
@@ -251,7 +258,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
unsigned int tlb_size;
unsigned int wimge = MAS2_M;
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
- unsigned int max_cam;
+ unsigned int max_cam, tsize_mask;
u64 size, memsize = (u64)memsize_in_meg << 20;
#ifdef CONFIG_SYS_PPC_DDR_WIMGE
@@ -261,15 +268,17 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
/* Convert (4^max) kB to (2^max) bytes */
max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10;
+ tsize_mask = ~1U;
} else {
/* Convert (2^max) kB to (2^max) bytes */
max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10;
+ tsize_mask = ~0U;
}
for (i = 0; size && i < 8; i++) {
int ram_tlb_index = find_free_tlbcam();
- u32 camsize = __ilog2_u64(size) & ~1U;
- u32 align = __ilog2(ram_tlb_address) & ~1U;
+ u32 camsize = __ilog2_u64(size) & tsize_mask;
+ u32 align = __ilog2(ram_tlb_address) & tsize_mask;
if (ram_tlb_index == -1)
break;
@@ -281,7 +290,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
if (camsize > max_cam)
camsize = max_cam;
- tlb_size = (camsize - 10) / 2;
+ tlb_size = camsize - 10;
set_tlb(1, ram_tlb_address, p_addr,
MAS3_SX|MAS3_SW|MAS3_SR, wimge,
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 2e0e292..b700a3a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -401,8 +401,8 @@ extern void print_bats(void);
#define MAS1_IPROT 0x40000000
#define MAS1_TID(x) (((x) << 16) & 0x3FFF0000)
#define MAS1_TS 0x00001000
-#define MAS1_TSIZE(x) (((x) << 8) & 0x00000F00)
-#define TSIZE_TO_BYTES(x) (1ULL << (((x) * 2) + 10))
+#define MAS1_TSIZE(x) (((x) << 7) & 0x00000F80)
+#define TSIZE_TO_BYTES(x) (1ULL << ((x) + 10))
#define MAS2_EPN 0xFFFFF000
#define MAS2_X0 0x00000040
@@ -458,22 +458,38 @@ extern void print_bats(void);
#define FSL_BOOKE_MAS7(rpn) \
(((u64)(rpn)) >> 32)
-#define BOOKE_PAGESZ_1K 0
-#define BOOKE_PAGESZ_4K 1
-#define BOOKE_PAGESZ_16K 2
-#define BOOKE_PAGESZ_64K 3
-#define BOOKE_PAGESZ_256K 4
-#define BOOKE_PAGESZ_1M 5
-#define BOOKE_PAGESZ_4M 6
-#define BOOKE_PAGESZ_16M 7
-#define BOOKE_PAGESZ_64M 8
-#define BOOKE_PAGESZ_256M 9
-#define BOOKE_PAGESZ_1G 10
-#define BOOKE_PAGESZ_4G 11
-#define BOOKE_PAGESZ_16GB 12
-#define BOOKE_PAGESZ_64GB 13
-#define BOOKE_PAGESZ_256GB 14
-#define BOOKE_PAGESZ_1TB 15
+#define BOOKE_PAGESZ_1K 0
+#define BOOKE_PAGESZ_2K 1
+#define BOOKE_PAGESZ_4K 2
+#define BOOKE_PAGESZ_8K 3
+#define BOOKE_PAGESZ_16K 4
+#define BOOKE_PAGESZ_32K 5
+#define BOOKE_PAGESZ_64K 6
+#define BOOKE_PAGESZ_128K 7
+#define BOOKE_PAGESZ_256K 8
+#define BOOKE_PAGESZ_512K 9
+#define BOOKE_PAGESZ_1M 10
+#define BOOKE_PAGESZ_2M 11
+#define BOOKE_PAGESZ_4M 12
+#define BOOKE_PAGESZ_8M 13
+#define BOOKE_PAGESZ_16M 14
+#define BOOKE_PAGESZ_32M 15
+#define BOOKE_PAGESZ_64M 16
+#define BOOKE_PAGESZ_128M 17
+#define BOOKE_PAGESZ_256M 18
+#define BOOKE_PAGESZ_512M 19
+#define BOOKE_PAGESZ_1G 20
+#define BOOKE_PAGESZ_2G 21
+#define BOOKE_PAGESZ_4G 22
+#define BOOKE_PAGESZ_8G 23
+#define BOOKE_PAGESZ_16GB 24
+#define BOOKE_PAGESZ_32GB 25
+#define BOOKE_PAGESZ_64GB 26
+#define BOOKE_PAGESZ_128GB 27
+#define BOOKE_PAGESZ_256GB 28
+#define BOOKE_PAGESZ_512GB 29
+#define BOOKE_PAGESZ_1TB 30
+#define BOOKE_PAGESZ_2TB 31
#define TLBIVAX_ALL 4
#define TLBIVAX_TLB0 0
--
1.7.9.5
More information about the U-Boot
mailing list