[U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)

[Tom Warren]

Simon,

On Mon, Jan 21, 2013 at 4:07 PM, Simon Glass <sjg at chromium.org> wrote:
> Hi Stephen,
>
> On Wed, Jan 16, 2013 at 2:51 PM, Stephen Warren <swarren at wwwdotorg.org> wrote:
>> On 01/16/2013 02:14 PM, Tom Warren wrote:
>>> This build is stripped down. It boots to the command prompt.
>>> GPIO is the only peripheral supported. Others TBD.
>>
>>> diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
>>
>>> +void pinmux_init(void)
>>> +{
>>> +     pinmux_config_table(tegra3_pinmux_common,
>>> +             ARRAY_SIZE(tegra3_pinmux_common));
>>
>> I assume that should say "tegra114" not "tegra3"?
>>
>>> diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
>>
>>> +/* Must be off for Dalmore to boot !?!? FIXME */
>>> +#define CONFIG_SYS_DCACHE_OFF
>>
>> Who knows if there is any A15 core/cache controller support in U-Boot yet?
>
> Sort-of. It works ok for me on snow, so long as you have a patch to
> enable L2 support.

Which patch, exactly, to enable L2 support? I'd like to test it on T114.

Thanks
>
> Regards,
> Simon
>
>>
>> Aside from any comments I've made, the series, briefly,
>> Reviewed-by: Stephen Warren <swarren at nvidia.com>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot