[U-Boot] [PATCH 7/7] Tegra114: Add/enable Dalmore build (T114 reference board)

[Simon Glass]

Hi Tom,

On Tue, Jan 22, 2013 at 12:47 PM, Tom Warren <twarren.nvidia at gmail.com> wrote:
> Simon,
>
> On Mon, Jan 21, 2013 at 4:07 PM, Simon Glass <sjg at chromium.org> wrote:
>> Hi Stephen,
>>
>> On Wed, Jan 16, 2013 at 2:51 PM, Stephen Warren <swarren at wwwdotorg.org> wrote:
>>> On 01/16/2013 02:14 PM, Tom Warren wrote:
>>>> This build is stripped down. It boots to the command prompt.
>>>> GPIO is the only peripheral supported. Others TBD.
>>>
>>>> diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
>>>
>>>> +void pinmux_init(void)
>>>> +{
>>>> +     pinmux_config_table(tegra3_pinmux_common,
>>>> +             ARRAY_SIZE(tegra3_pinmux_common));
>>>
>>> I assume that should say "tegra114" not "tegra3"?
>>>
>>>> diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
>>>
>>>> +/* Must be off for Dalmore to boot !?!? FIXME */
>>>> +#define CONFIG_SYS_DCACHE_OFF
>>>
>>> Who knows if there is any A15 core/cache controller support in U-Boot yet?
>>
>> Sort-of. It works ok for me on snow, so long as you have a patch to
>> enable L2 support.
>
> Which patch, exactly, to enable L2 support? I'd like to test it on T114.

I was thinking about this one (it will need porting and perhaps can
become partly common?)

http://patchwork.ozlabs.org/patch/202874/

Regards,
Simon

>
> Thanks
>>
>> Regards,
>> Simon
>>
>>>
>>> Aside from any comments I've made, the series, briefly,
>>> Reviewed-by: Stephen Warren <swarren at nvidia.com>
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot