[U-Boot] [PATCH 2/2] board/qemu-mips: add '-M mips' switch to the example usage command

[Daniel Schwierzeck]

2013/1/8 Gabor Juhos <juhosg at openwrt.org>:
> Using the example command from the README file does
> not work as expected. qemu shows a text similar to
> the one below and it hangs.
>
>     $ qemu-system-mips -L . -nographic
>     Could not open option rom 'pxe-pcnet.rom': No such file or directory
>     qemu-system-mips: pci_add_option_rom: failed to find romfile "vgabios-cirrus.bin"
>     qemu: terminating on signal 15 from pid 19726
>
> This happens because qemu emulates a Malta board by
> default if the machine type is not defined explicitely
> on the command line.
>
> For a working test, the '-M mips' switch is required:
>
>     $ qemu-system-mips -M mips -L . -nographic
>     Could not open option rom 'vgabios.bin': No such file or directory
>
>     U-Boot 2013.01-rc2-00132-g1e8e648-dirty (Jan 08 2013 - 09:06:42)
>
>     Board: Qemu -M mips CPU: 24Kf proc_id=0x19300
>     DRAM:  128 MiB
>     ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB
>     Flash: 0 Bytes
>     *** Warning - bad CRC, using default environment
>
>     In:    serial
>     Out:   serial
>     Err:   serial
>     Net:   NE2000
>     Hit any key to stop autoboot:  0
>     qemu-mips #
>
> Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
> Cc: Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>
> Cc: Vlad Lungu <vlad.lungu at windriver.com>
> ---
>  board/qemu-mips/README |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

applied to u-boot-mips/next, thanks

-- 
Best regards,
Daniel