[U-Boot] [PATCH 2/2] board/qemu-mips: add '-M mips' switch to the example usage command
Gabor Juhos
juhosg at openwrt.org
Tue Jan 8 13:22:51 CET 2013
Using the example command from the README file does
not work as expected. qemu shows a text similar to
the one below and it hangs.
$ qemu-system-mips -L . -nographic
Could not open option rom 'pxe-pcnet.rom': No such file or directory
qemu-system-mips: pci_add_option_rom: failed to find romfile "vgabios-cirrus.bin"
qemu: terminating on signal 15 from pid 19726
This happens because qemu emulates a Malta board by
default if the machine type is not defined explicitely
on the command line.
For a working test, the '-M mips' switch is required:
$ qemu-system-mips -M mips -L . -nographic
Could not open option rom 'vgabios.bin': No such file or directory
U-Boot 2013.01-rc2-00132-g1e8e648-dirty (Jan 08 2013 - 09:06:42)
Board: Qemu -M mips CPU: 24Kf proc_id=0x19300
DRAM: 128 MiB
## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB
Flash: 0 Bytes
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: NE2000
Hit any key to stop autoboot: 0
qemu-mips #
Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>
Cc: Vlad Lungu <vlad.lungu at windriver.com>
---
board/qemu-mips/README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/qemu-mips/README b/board/qemu-mips/README
index b2c2b54..ec58ce4 100644
--- a/board/qemu-mips/README
+++ b/board/qemu-mips/README
@@ -23,7 +23,7 @@ I) Example usage:
# ln -s u-boot.bin mips_bios.bin
start it:
-qemu-system-mips -L . /dev/null -nographic
+qemu-system-mips -M mips -L . /dev/null -nographic
or
--
1.7.10
More information about the U-Boot
mailing list