[U-Boot] configure USB Host1 in U-Boot of iMx53

Stefano Babic sbabic at denx.de
Wed Jan 16 12:24:08 CET 2013


On 16/01/2013 11:49, Sarvesh Gupta wrote:
> 
> Dear All,
> 
> I have added the USB host controller driver into our Mx53 loco board's u-boot and also made some changes in mx53_loco.h and mx53_loco.c.
> 
> Below is the complete log what I am getting on serial console:
> 
> 
> 
> U-Boot 2009.08-dirty (Jan 15 2013 - 12:32:20)
> CPU:   Freescale i.MX53 family 2.1V at 800 MHz
> mx53 pll1: 800MHz
> mx53 pll2: 400MHz
> mx53 pll3: 216MHz
> mx53 pll4: 455MHz

This ML is intended for U-Boot mainline. However, you are using a
version provided and modified by the manufacturer. Ask your support for
this, or use u-boot mainline (v2013.01) to post your questions on this
mailing list.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list